Havis Shields Automobile C TCB 30 User Manual

INSTALL INSTRUCTIONS C-TCB-30  
2000-2005 CHEVROLET IMPALA  
TOOLS REQUIRED:  
Ratcheting Wrench  
Torx Bit Set  
Standard Wrench Set  
Screwdriver Set  
Standard Socket Set  
HARDWARE:  
QTY DESCRIPTION  
PART #  
7
7
7
1
2
1
¼-20 x ¾” Hex Head Bolts  
¼” Flat Washers  
¼” Lock Washers  
5/16-18 x 1” Hex Head Bolt  
5/16” Flat Washers  
5/16-18 Nylock Nut  
GSM33001  
GSM31005  
GSM31026  
GSM33012  
GSM31006  
GSM30017  
MAIN COMPONENTS:  
QTY DESCRIPTION  
Main Seat Base Plate  
Telescoping  
Pole  
1
1
1
1
Main Seat Base Plate  
Pole Support Assembly  
Cross Brace  
Pole Support  
Assembly  
Telescoping Pole  
Cross Brace  
SUB ASSEMBLY:  
1. Remove Passenger Seat:  
Remove (2) T-50 torx bolts on passenger seat base.  
Disconnect wire plug if vehicle has power seats.  
Remove head rest on passenger seat.  
Angle seat forward and pull back to remove seat, which is held down in the front by  
(2) hooks on the floor.  
INSTALLATION:  
1. Mount C-TCB-30:  
Position Main Seat Base Plate so that square cutouts are positioned where hooks for  
seat are located.  
Replace passenger seat sliding hooks into the floor first.  
Replace torx bolts (T-50).  
Mount Pole Support Assembly to Main Seat Base Plate using ¼-20 x ¾” Hex Head  
Bolts, Washers and Nuts.  
Attach Cross Brace to Pole Support Assembly using Tab on side of pole and  
5/16-18 x 1” Hex Head Bolt, Washers and Nuts.  
Mount Cross Brace on passenger seat using existing hole.  
C-TCB-30-INST-9-05  
 

Graco Crib 9415 User Manual
Graco Heat Pump 3A0096B User Manual
Greenheck Fan Ventilation Hood FSD 331 User Manual
Grizzly Cordless Sander G0563 User Manual
Grizzly Welder G4173 1 8 HP User Manual
Heath Zenith Door 598 1123 02 User Manual
Honeywell Boiler L7224 User Manual
Hotpoint Washer 9567 User Manual
Husqvarna Lawn Mower 323R User Manual
Impex Fitness Equipment IVT 451 User Manual