22” magnetIc Floor sweeper
wIth release
98399
InstructIons and precautIons
saVe these InstructIons. read all
precautIons and InstructIons.
Copyright 2008 by Harbor Freight Tools . All rights reserved. No portion of this document or any artwork contained
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product
may differ slightly from the product described herein. Tools required for assembly and service may not be included.
©
®
For technical questions or replacement parts, please call 1-800-444-3353.
specIFIcatIons
unpackIng
When unpacking, check to make sure that
the item is intact and undamaged. If any parts are
missing or broken, please call Harbor Freight Tools
at the number shown on the cover of this document
as soon as possible.
Ground clearance
2-1/8” H, 1” Low
Magnetic Pulling Force
Handle Length
9 Lbs.
Adjusts from 37” to 51”
Revised Manual 10h
Figure 3
parts lIst & assemBlY
dIagram
part
description
Qty.
1
2
3
4
5
6
7
Housing
Wheel
1
2
Handle
1
Bolt/Washer
2 sets
Handle Base
Housing Handle
Pan Head Bolt
1
1
1
4.
To release the material that has been picked
up by the Magnetic Sweeper, place Housing
(1) over a trash can or desired debris des-
tination. Pull up on the Housing Handle as
shown in Figure 3, above.
please note: Move the Sweeper away from
the debris before releasing the Housing
Handle or it will pick up the debris again.
cleanIng and maIntenance
1.
BeFore each use, inspect the general
condition of the Floor Sweeper. Check for
loose screws, misalignment or binding of
moving parts, cracked or broken parts and
any other condition that may affect its safe
operation.
2.
aFter use, clean external surfaces of the
Sweeper with clean cloth.
record serial number here:
note:If product has no serial number, record
month and year of purchase instead.
5
note:Some parts are listed and shown for illustra-
tion purposes only, and are not available
individually as replacement parts.
6
7
please read the FollowIng careFullY
THE MANUFACTURER AND/oR DISTRIBUToR HAS PRovIDED
THE PARTS LIST AND ASSEMBLy DIAGRAM IN THIS DoCUMENT
AS A REFERENCE TooL oNLy. NEITHER THE MANUFACTURER
oR DISTRIBUToR MAKES ANy REPRESENTATIoN oR WARRANTy
oF ANy KIND To THE BUyER THAT HE oR SHE IS qUALIFIED To
MAKE ANy REPAIRS To THE PRoDUCT, oR THAT HE oR SHE
IS qUALIFIED To REPLACE ANy PARTS oF THE PRoDUCT. IN
FACT, THE MANUFACTURER AND/oR DISTRIBUToR ExPRESSLy
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHoULD
BE UNDERTAKEN By CERTIFIED AND LICENSED TECHNICIANS,
AND NoT By THE BUyER. THE BUyER ASSUMES ALL RISK AND
LIABILITy ARISING oUT oF HIS oR HER REPAIRS To THE oRIGINAL
PRoDUCT oR REPLACEMENT PARTS THERETo, oR ARISING
oUT oF HIS oR HER INSTALLATIoN oF REPLACEMENT PARTS
THERETo.
SKU 98399
For technical questions, please call 1-800-444-3353.
Page 3
|