HP Hewlett Packard Computer Monitor D8910A User Manual

1
0.25 mm dot pitch for  
excellent graphics  
FD Trinitron®, anti-glare, anti-  
static, multilayer screen coating  
Full scan screen that gives  
an edge to edge image  
On/Off switch  
Image adjustment controls to  
operate on-screen display menus  
Status indicator  
HP D8910A, D8910W  
19-inch Color Monitors  
18-inch Viewable Image  
User’s Guide  
 
HP 19" Color Monitor User’s Guide  
What Your New Monitor Offers  
What Your New Monitor Offers  
Your HP monitor is a FD Trinitron 19-inch (18-inch viewable image), high resolution,  
multi-synchronous color monitor. Multi-synchronous means that the monitor supports a  
range of video modes. It is optimized to be used with all Hewlett-Packard computers.  
Your HP color monitor has the following features:  
A 19-inch FD Trinitron tube, with a 18-inch viewable image, and 0.25 mm dot pitch  
for excellent graphics. Anti-glare, multilayer coating to minimize reflection.  
Support of video modes up to 1600 x 1200 at 85 Hz refresh rates.  
Image adjustment using on-screen display menus. Includes color adjustment and  
image manipulation controls to optimize the quality and position of the image.  
Improved color matching using the sRGB color temperature profile: this can  
significantly improve color matching with other system devices (printer, computer  
software, scanner, etc) using sRGB standard color space.  
Monitor power management system (VESA1 standard) controlled from suitably  
equipped HP computers to automatically reduce the power consumption of the  
monitor. As an ENERGY STAR2 partner, HP has determined that this product  
meets the ENERGY STAR guidelines for energy efficiency  
Monitor Plug and Play capability (VESA DDC1/2Bi standard) that enables the  
monitor to identify itself to suitably equipped HP computers.  
Compliance with ISO 9241-3/-7/-8 ergonomic standards.  
Complies with MPRIII, level A guidelines for upper limits of electrical and  
electrostatic emissions, from the Swedish National Board for Measurement and  
Testing.  
Your HP monitor complies with TCO99 requirements, refer to the last pages of  
this manual for more information.  
1
2
VESA is the Video Electronics Standards Association  
ENERGY STAR is trademark of United States Environmental Protection Agency (EPA)  
English 3  
 
HP 19" Color Monitor User’s Guide  
Setting Up Your Monitor  
Setting Up Your Monitor  
Where to Place the Monitor  
Place your monitor on a flat sturdy surface.  
Ensure the operating site is free from excessive heat, moisture, and sources of  
electromagnetic fields. Sources of electromagnetic fields include transformers, motors,  
and other monitors.  
Connecting the Cables  
1
Before you connect any cables, refer to the safety instructions at the beginning of  
this manual. Make sure your computer and monitor are switched off.  
Connect the video cable (it has a 15-pin plug) to the video outlet on your com-  
puter. Tighten the thumbscrews on the plug.  
2
3
4
Connect the power cord to the monitor.  
Plug the power cord into the power outlet.  
Video cable  
Power cords  
The location of your computer’s video cable connector may be different to the one  
shown. Refer to the manual that came with your computer, if necessary.  
NOTE  
4 English  
 
HP 19" Color Monitor User’s Guide  
Using Your Monitor  
Using Your Monitor  
1
2
Press the power switch to turn the monitor on or off.  
When the power is turned on, the power-on indicator will light up.  
The light indicates the operating state:  
Green: The monitor is in normal operation.  
Red: The monitor is in the active off state.  
Off: The monitor is turned off at the power switch or disconnected from the mains  
outlet.  
If the power management function of your computer is working properly, you do not  
need to switch the monitor off or on. This occurs automatically.  
Pressing the  
button activates the monitor’s on-screen menu. This menu contains the  
monitor’s various adjustment features.  
Select a feature using the  
require and then press  
and  
buttons. Scroll to the adjustment feature you  
to access the menu.  
To adjust the required feature, use the  
are complete.  
and  
buttons until the desired changes  
Menu language  
1
When you press the  
button for the first time, the Menu language menu  
appears on the screen.  
2
Select a language with the  
activate your choice.  
and  
buttons and press the  
button to  
English 5  
 
HP 19" Color Monitor User’s Guide  
Using Your Monitor  
Using the menu  
Menu operations are controlled with the  
,
and  
buttons.  
1
2
You can display the menu by pressing the  
button.  
buttons.  
Select the header with the  
and  
1
2
3
SIZE & POSITION  
SHAPE  
SHARPNESS  
COLOR  
MISCELLANEOUS  
CONTRAST  
BRIGHTNESS  
HORIZONTAL CENTERING  
3
Press  
to confirm the selection.  
SIZE & POSITION  
SHAPE  
SHARPNESS  
COLOR  
4
MISCELLANEOUS  
CONTRAST  
BRIGHTNESS  
TILT  
4
Adjustment and settings corresponding the header appear below the header field.  
CONTRAST  
BRIGHTNESS  
TILT  
5
ORTHOGONALITY  
TRAPEZOID  
PINCUSHION  
PINCUSHION BALANCE  
EXIT  
6
1280 x 1024 85 Hz  
5
6
Select the adjustment with the  
and  
buttons.  
Press  
to confirm the selection. The menu disappears and a scale shows the  
position of the adjustment. In addition to the bar, position of the adjustment is  
shown as a percentage of the maximum value. The upper number shows the  
current value and the lower one shows the value where the adjustment started.  
6 English  
 
HP 19" Color Monitor User’s Guide  
Using Your Monitor  
7
TILT  
50 %  
77 %  
8
7
8
Adjust with the  
and  
buttons.  
button.  
When ready, press the  
Exiting the menu  
The onscreen menu disappears automatically after 20 seconds of inactivity. Alterna-  
tively select EXIT and press the button to make the menu disappear immediately.  
Adjusting the picture of your monitor  
You should allow the monitor warm up for 20 minutes before making any adjustments  
to image settings of the monitor.  
Size and position  
The illustrations below show the effect of each adjustment when the property is  
adjusted from the extreme left to the extreme right position.  
First correct the property with largest deviation from the correct value then adjust  
the width and height.  
SIZE & POSITION  
SHAPE  
SHARPNESS  
COLOR  
MISCELLANEOUS  
CONTRAST  
BRIGHTNESS  
HORIZONTAL CENTERING  
WIDTH  
VERTICAL CENTERING  
HEIGHT  
PRESET RECALL  
EXIT  
1280 x 1024 85 Hz  
Brightness and Contrast  
With brightness adjustment you may control the brightness of the whole picture.  
Contrast increases or decreases the brightness difference between light and dark colors.  
Adjust brightness and contrast adequately according to ambient light conditions to  
obtain the best picture quality.  
English 7  
 
HP 19" Color Monitor User’s Guide  
Using Your Monitor  
Preset Recall  
This function restores the factory defaults and deletes user made settings for:  
Size and position  
Shape  
Shape  
The illustrations below show the effect of each adjustment when the property is  
adjusted from the extreme left to the extreme right psosition.  
When adjusting these properties, set picture width and height so that its edges are  
visible. Compare the edges of the picture to those of the bezel.  
First correct the property with largest deviation from the correct value then adjust  
the width and height.  
SIZE & POSITION  
SHAPE  
SHARPNESS  
COLOR  
MISCELLANEOUS  
CONTRAST  
BRIGHTNESS  
TILT  
ORTHOGONALITY  
TRAPEZOID  
PINCUSHION  
PINCUSHION BALANCE  
EXIT  
1280 x 1024 85 Hz  
Sharpness  
SIZE & POSITION  
SHAPE  
SHARPNESS  
COLOR  
MISCELLANEOUS  
VERTICAL CONV  
HORIZONTAL CONV  
MOIRE  
DEFAULT SHARPNESS  
EXIT  
1280 X 1024 85 Hz  
8 English  
 
HP 19" Color Monitor User’s Guide  
Using Your Monitor  
Vertical and horizontal convergence  
A white line on the screen is made up of red, green and blue lines. If there are no  
convergence errors on the picture, the lines will be exactly overlaid and the resulting  
color is white. If there is a serious convergence error, separate red, green or blue lines  
will be seen instead of white.  
With Horizontal conv you may minimize the error in vertical lines.  
With Vertical conv you may minimize the error in horizontal lines.  
Moire  
The interference on the screen can be reduced with the help of moire adjustment.  
Boost the moire adjustment until the interference pattern is acceptable.  
Moire adjustment slightly reduces picture sharpness. Return the adjustment to zero if  
there is no risk of moire interference.  
Default sharpness  
This function restores the factory defaults and deletes user made settings for:  
Vertical conv, Horizontal conv, Moire  
English 9  
 
HP 19" Color Monitor User’s Guide  
Using Your Monitor  
Color  
With the Color menu the user may adjust the tint of the screen.  
SIZE & POSITION  
SHAPE  
SHARPNESS  
COLOR  
MISCELLANEOUS  
CONTRAST  
BRIGHTNESS  
COLOR TEMP  
RED  
9300 K  
GREEN  
BLUE  
SAVE TO CUSTOM 1  
EXIT  
1280 x 1024 85 Hz  
Color temperature  
The user can choose between the following fixed color temperatures:  
5000K, 6000K, 6500K, 7000K, 8000K, 9300K, 10000K  
Alternatively, a user specified profile can be selected:  
CUSTOM1 User definable color temperature, refer to the chapter ”Save to  
Custom”  
sRGB  
sRGB stands for ”standardized Red, Green and Blue” colour space. Selecting  
sRGB means that the monitor displays the images with the same colour balance as  
other system components (scanner, printer,computer software etc) utilizing the  
same sRGB color standard.  
After a preset tint has been selected, the color temperature may be adjusted further as  
desired.  
Red, Green, Blue  
Color monitors mix red, green and blue colors to produce required tint. With Red,  
Green and Blue intensity control you may finetune any preset tint.  
After adjusting Red, Green or Blue the word CUSTOM replaces the color  
temperature indication.  
10 English  
 
HP 19" Color Monitor User’s Guide  
Using Your Monitor  
SIZE & POSITION  
SHAPE  
SHARPNESS  
COLOR  
MISCELLANEOUS  
CONTRAST  
BRIGHTNESS  
COLOR TEMP  
RED  
CUSTOM  
GREEN  
BLUE  
SAVE TO CUSTOM 1  
EXIT  
1280 x 1024 85 Hz  
Save to Custom  
You may save one custom color temperature setting containing individual Red, Green  
and Blue adjustments.  
To create a custom color temperature  
Adjust the desired tint with Red, Green and Blue.  
Step to Save to Custom and store the settings.  
To recall a custom color temperature, refer to the section ’Color temp’.  
Miscellaneous  
SHAPE  
SHARPNESS  
COLOR  
MISCELLANEOUS  
CONTRAST  
BRIGHTNESS  
DEMAGNETIZE  
LANGUAGE/SPRACHE/LANGUE  
ABOUT MONITOR  
EXIT  
1280 x 1024 85 Hz  
English 11  
 
HP 19" Color Monitor User’s Guide  
Using Your Monitor  
Demagnetize  
External magnetic fields may cause distortion or discoloration in the picture. Degauss-  
ing, which takes place automatically when the monitor is switched on, normally  
maintains faultless color purity.  
If the purity deteriorates during use, for example when the monitor’s position is  
changed, perform demagnetizing.  
During the degaussing process the picture is distorted for a few seconds. When the  
process is completed, any color impurities will disappear caused by stray magnetic  
fields.  
The efficiency of the demagnetization decreases if repeated at intervals shorter than 15  
minutes.  
Menu language  
The language selection affects the menu languages of your monitor.  
The following languages are available:  
LANGUAGE/SPRACHE/LANGUE  
ENGLISH  
DEUTSCH  
ESPAÑOL  
FRANÇAIS  
ITALIANO  
*
PORTUGUÊS  
EXIT  
1280 x 1024 85 Hz  
The active language is marked with an asterisk.  
About monitor  
Shows the display properties of the currently used display mode.  
ABOUT MONITOR  
CURRENT MODE  
RESOLUTION  
HOR. FREQ.  
VERT. FREQ.  
1280 x 1024  
91,15 KHz  
85 KHz  
SYNCHRONIZATION  
HOR. FREQ.  
29 - 107 KHz  
50 - 150 Hz  
VERT. FREQ.  
EXIT  
1280 x 1024 85 Hz  
12 English  
 
HP 19" Color Monitor User’s Guide  
Using Your Monitor  
Minimizing Eye Strain  
To avoid screen flicker and minimize eye strain, use the highest supported image  
refresh rate for the chosen resolution. It is recommended that you use a refresh rate of  
85 Hz. The image refresh rate is the number of times per second that the image is  
refreshed.  
Minimizing Energy Consumption  
If your computer supports VESA monitor power management (available on many HP  
computers), you can minimize the power consumed by the monitor.  
There are two power saving modes:  
Suspend mode 1 (uses less than 10 W).  
Active off mode 2 (uses less than 3 W). In this mode, the monitor’s front panel  
indicator light blinks slowly in green.  
To set these power saving modes, refer to the manual that came with your computer.  
If your screen is not displaying an image, check the front panel indicator light first —  
your monitor may be in a power saving mode.  
What Video Modes are Supported  
Your monitor comes with the standard modes shown in the table below. It also  
supports intermediate video modes. With the intermediate modes, the displayed image  
may need to be optimized using the buttons on the front panel. All modes are non-  
interlaced. Your monitor is GTF* compatible.  
Resolution  
640x400  
Refresh rate/Hz  
70  
640x480  
60, 85  
800x600  
85  
1024 x 768  
1280 x 1024  
1600 x 1200  
75, 85  
75, 85, GTF  
75, 85  
*GTF stands for General Timing Formula.  
1
2
Suspend mode is activated when vertical sync is cut by the video controller.  
Active off mode is activated when both vertical and horizontal sync are cut by the video controller.  
English 13  
 
HP 19" Color Monitor User’s Guide  
Technical Specifications  
Technical Specifications  
19 - inch, viewable image size 18 inch  
Size  
PICTURE TUBE  
INTERFACE  
Dot pitch  
0.25mm  
Face plate  
FD Trinitron, anti-glare, antistatic  
Detachable Video Cable with 15-pin mini D-SUB Connector  
Horizontal  
Vertical  
29 to 107 kHz  
50 to 150 Hz  
SCANNING  
FREQUENCY  
MAX. RESOLUTION  
(HxV)  
1600x1200 (85Hz)  
WARM-UP TIME  
PIXEL CLOCK  
30 minutes to reach optimum performance level  
<230 MHz  
Standard sixe: 354 (W) x 265 (H) mm  
Maximum size: 364 (W) x 273 (H) mm  
IMAGE SIZE  
On 130 W (max)  
Constant green LED  
Constant green LED  
Constant red LED  
Constant red LED  
LED is Off  
Standby mode 90W (max)  
Suspend mode 10W (max)  
Active Off 3W (max)  
Off 1W (max)  
POWER  
MANAGEMENT  
POWER SOURCE  
AC 90 to 264 V, 50/60 Hz Current 2 A  
Temperature  
Humidity  
+0°C to +40°C  
OPERATING  
ENVIRONMENT  
10% RH through 80 % RH (without condensation)  
-20°C to +60°C  
Temperature  
Humidity  
STORAGE  
ENVIRONMENT  
8 % RH through 85 % RH (without condensation)  
CABINET DIMENSIONS 471 (H) x 470 (W) x 464 (D)  
WEIGHT  
25.5 kg  
Tilt angle  
Swivel Angle  
-5° to 15°  
TILT&SWIVEL STAND  
-90° to 90°  
14 English  
 
HP 19" Color Monitor User’s Guide  
Care and Cleaning, Environmental Information  
Care and Cleaning  
Do not place anything on top of the monitor. Doing so may block the monitor vents  
and cause damage to the monitor due to overheating.  
Do not let liquid get on or into the monitor.  
To maximize screen life and prevent damage to the picture tube (such as burned  
phosphor due to leaving the same image on the screen for a long time), it is recom-  
mended that you:  
Use the monitor power management system (on HP computers) or a screen saver  
program.  
Avoid setting contrast and brightness to their maximum levels for prolonged  
periods.  
If you do not have a power management system or a screen saver program, switch  
the monitor off or reduce the brightness and contrast to minimum levels when the  
monitor is not in use.  
Your monitor has an anti-glare, anti-static screen coating. To prevent damage to the  
monitor screen’s coating, use a regular household glass cleaner when cleaning the  
screen. To clean the screen:  
1
2
Switch the monitor off and remove the power plug (pull the plug, not the cable).  
Wet a soft cotton cloth with the cleaning solution and gently wipe the screen. Do  
not spray cleaner onto the screen because the cleaner may drip inside the monitor.  
Dry with a clean, soft cotton cloth. Do not use cleaning solutions containing  
fluoride, acids, or alkalis.  
3
Environmental Information  
HP has a strong commitment toward the environment. Your HP monitor has been  
designed to respect the environment as much as possible.  
HP can also take back your old monitor for recycling when it reaches the end of its  
useful life.  
In fact, HP has a product take-back program in several countries. The collected  
equipment is sent to one of HP’s recycling facilities in Europe or the USA. As many  
parts as possible are reused. The remainder is recycled. Special care is taken for  
batteries and other potentially toxic substances, which are reduced to non-harmful  
components through a special chemical process. If you require more details about  
HP’s product take-back program, contact your dealer or your nearest HP Sales Office.  
The cathode ray tube used in this monitor does not contain cadmium.  
English 15  
 
HP 19" Color Monitor User’s Guide  
Hardware Warranty  
Hardware Warranty  
PART I - HP General Hardware Warranty  
General  
This HP Monitor Hardware Warranty Statement gives you, the customer, express warranty rights from HP, the  
manufacturer.  
FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW ZEALAND: THE WARRANTY TERMS  
CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO NOT  
EXCLUDE, RESTRICT OR MODIFY AND ARE IN ADDITION TO THE MANDATORY STATUTORY  
RIGHTS APPLICABLE TO THE SALE OF THIS PRODUCT TO YOU.  
THE LAWS OF YOUR COUNTRY MAY PROVIDE FOR DIFFERENT WARRANTY RIGHTS. IF SO,  
YOUR AUTHORIZED HP DEALER OR HP SALES AND SERVICE OFFICE CAN PROVIDE YOU WITH  
DETAILS.  
Warranty repair or replacement  
Model  
Warranty Period  
Service provided  
3 years—unless original end-user  
customer has otherwise agreed to a  
shorter period of warranty at the time  
of purchase.  
On-site service for first year, and  
return to an HP or repair-authorized  
reseller service-center for the following  
two years.  
D8910A  
D8910W  
Hewlett-Packard (HP) warrants this monitor hardware product, or accessory against defects in materials and  
workmanship for the applicable warranty period stated above, commencing from the date of delivery of the  
product to the end-user customer.  
HP does not warrant that the HP hardware will operate uninterrupted or error free.  
If, during the product warranty period, HP is unable, within a reasonable time, to repair or replace your  
product to the condition as warranted, you will be entitled to a refund (in the amount of the product purchase  
price) upon prompt return of the product to your authorized HP dealer or other HP designate. Unless  
otherwise stated or agreed upon in writing with HP, all hardware components must be returned for refund  
with the entire system process unit.  
HP software is covered by the HP Software Product Limited Warranty located in your HP product manual.  
Unless otherwise stated, and to the extent permitted by local law, hardware products may contain  
remanufactured parts (equivalent to new in performance) or parts which may have been subject to prior  
incidental use. HP may repair or replace hardware products (i) with products which are equivalent in  
performance to the products being repaired or replaced but which may have been subject to prior use, or (ii)  
with products which may contain remanufactured parts equivalent to new in performance or parts which may  
have been subject to prior incidental use.  
16 English  
 
HP 19" Color Monitor User’s Guide  
Hardware Warranty  
Proof of Purchase and Warranty Period  
In order to receive service or support for your hardware product for the warranty period, proof of the original  
purchase date of the product may be required in order to establish the delivery date of your product. If the  
delivery date is not available, either the purchase date or the manufacturer’s date (located on the product)  
becomes the beginning of the warranty period.  
Limitation of Warranty  
Warranty does not apply to defects resulting from: (a) improper or inadequate maintenance or calibration; (b)  
software, interfacing, parts or supplies not supplied by HP; (c) unauthorized repair, maintenance, modifica-  
tion or misuse; (d) operation outside of the published operating specifications for the product; (e) improper  
site preparation or maintenance; or (f) such other exclusions as may be expressly set forth in this Warranty  
Statement.  
HP MAKES NO OTHER EXPRESS WARRANTY, WHETHER WRITTEN OR ORAL, WITH RESPECT TO  
THIS PRODUCT.  
TO THE EXTENT ALLOWED BY APPLICABLE LOCAL LAW, ANY IMPLIED WARRANTY OF  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED TO THE DURATION  
OF THE EXPRESS WARRANTY SET FORTH ABOVE.  
Limitation of Liability and Remedies  
TO THE EXTENT ALLOWED BY APPLICABLE LOCAL LAW, THE REMEDIES IN THIS WARRANTY  
STATEMENT ARE YOUR SOLE AND EXCLUSIVE REMEDIES. IN NO EVENT SHALL HP BE LIABLE  
FOR LOSS OF DATA OR FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL  
DAMAGE, WHETHER BASED ON WARRANTY CONTRACT, TORT, OR ANY OTHER LEGAL  
THEORY.  
The foregoing limitation of liability shall not apply in the event that any HP product sold hereunder is  
determined by a court of competent jurisdiction to be defective and to have directly caused bodily injury,  
death, or property damage. To the extent allowed by applicable local law, HP’s liability for property damage  
does not exceed the greater of $50,000 or the purchase price of the specific product that caused such damage.  
PART II - Year 2000 Warranty  
Subject to all of the terms and limitations of the HP Limited Warranty Statement provided with this HP  
Product, HP warrants that this HP Product will be able to accurately process date data (including, but not  
limited to, calculating, comparing, and sequencing) from, into, and between the twentieth and twenty-first  
centuries, and the years 1999 and 2000, including leap year calculations, when used in accordance with the  
Product documentation provided by HP (including any instructions for installing patches or upgrades),  
provided that all other products (e.g. hardware, software, firmware) used in combination with such HP  
Product(s) properly exchange date data with it. The duration of the Year 2000 warranty extends through  
January 31, 2001.  
English 17  
 
HP 19" Color Monitor User’s Guide  
Declaration of Conformity  
Declaration of Conformity  
DECLARATION OF CONFORMITY  
according to ISO/IEC Guide 22 and EN 45014  
Manufacturer’s Name:  
HEWLETT-PACKARD France  
Manufacturer’s Address: 5, Avenue Raymond Chanas - EYBENS  
38053 GRENOBLE CEDEX 09 -FRANCE  
declares, that the products:  
Product Name:  
Model Number:  
19-inch Color Monitor  
D8910 *  
(*can be blank or any alpha-numeric charater)  
conform(s) to the following Product Specifications:  
SAFETY  
EMC  
International:  
Europe:  
IEC 60950:1991 + A1 + A2 +A3 +A4 / GB4943-1995  
EN 60950:1992 + A1 + A2 +A3 +A4  
CISPR 22:1993+A1+A2 / EN 55022:1994 +A1+A2 Class B 1)  
EN 50082-1:1992  
IEC 801-2:1992 / prEN 55024-2:1992 - 4kV CD, 8 kV AD  
IEC 801-3:1984 - 3V/m  
IEC 801-4:1988 / prEN 55024-4:1992 - 1 kV Power Lines  
IEC 555-2:1982 + A1:1985 / EN 60555-2:1987  
IEC 61000-3-3:1994 / EN 61000-3-3:1995  
GB9254-1988  
FCC Title 47 CFR, Part 15 class B 2)  
ICES-003, Issue 2  
VCCI-B  
AS/NZ 3548:1992  
Supplementary information: The product herewith complies with the requirements of the following Directives and carries the CE mark  
accordingly:  
the EMC Directive 89/336/EEC, the Low Voltage Directive 73/23/EEC both amended by the Directive 93/68/EEC.  
1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer systems.  
2) This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:  
(1) this device may not cause harmful interference, and  
(2) this device must accept any interference received, including interference that may cause undesired operation.  
Jean Marc JULIA  
Grenoble, August 1999  
Quality Manager  
For Compliance Information ONLY, contact:  
USA contact: Hewlett-Packard Company, Corporate Product Regulations Manager, 3000 Hanover  
Street, Palo Alto, CA 94304. (Phone +1 (415) 857-1501).  
18 English  
 
HP 19" Color Monitor User’s Guide  
Regulatory Information  
Notice for the USA: FCC Class B Statement  
Federal Communications Commission Radio Frequency Interference Statement Warning:  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to correct the interference by one or  
more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the distance between the equipment and the receiver.  
Connect the equipment to an outlet on a different circuit to the one the receiver is connected to.  
Consult your dealer or an experienced radio/TV technician for help.  
Hewlett-Packard's FCC Compliance Tests were conducted using HP-supported peripheral devices and HP  
shielded cables, such as those you receive with your system. Changes or modifications not expressly  
approved by Hewlett-Packard could void the user's authority to operate the equipment.  
Notice for Canada  
This Class “B” digital apparatus meets all requirements of the Canadian Interference-Causing Equipment  
Regulations.  
Cet appareil numérique de la Classe B respecte toutes les exigences du règlement sur le matériel brouilleur du  
Canada.  
X-Ray Radiation Notice  
When operating, this product emits x-rays; however, it is well shielded and meets the safety and health  
requirements of various countries, such as the Radiation Act of Germany and the Radiation Control for Health  
and Safety Act of the United States.  
Radiation emitted by this product is less than 0.1 mR/hr (1uSv/hr) at a distance of 10 centimeters from the  
surface of the cathode ray tube. The x-ray radiation primarily depends on the characteristics of the cathode ray  
tube and its associated low voltage and high voltage circuitry. Internal controls have been adjusted to ensure  
safe operation. Only qualified personnel should perform any internal adjustments as specified in the service  
manual for this product.  
Replace the cathode ray tube with an identical CRT only.  
Safety Warning for USA  
If the power cord is not supplied with your monitor, select the proper power cord according to your national  
electric safety codes.  
USA: use a UL listed detachable power cord.  
English 19  
 
HP 19" Color Monitor User’s Guide  
Regulatory Information  
Notice for Japan  
Notice for Korea  
20 English  
 
HP 19" Color Monitor User’s Guide  
Congratulations!  
You have just purchased a TCO’99 approved and labelled product! Your choice has provided you with a  
product developed for professional use. Your purchase has also contributed to reducing the burden on the  
environment and also to the further development of environmentally adapted electronics products.  
Why do we have environmentally labeled computers?  
In many countries, environmental labeling has become an established method for encouraging the adaptation  
of goods and services to the environment. The main problem, as far as computers and other electronics  
equipment are concerned, is that environmentally harmful substances are used both in the products and  
during their manufacture. Since it is not so far possible to satisfactorily recycle the majority of electronics  
equipment, most of these potentially damaging substances sooner or later enter nature.  
There are also other characteristics of a computer, such as energy consumption levels, that are important from  
the viewpoints of both the work (internal) and natural (external) environments. Since all methods of  
electricity generation have a negative effect on the environment (e.g. acidic and climate-influencing  
emissions, radioactive waste), it is vital to save energy. Electronics equipment in offices is often left running  
continuously and thereby consumes a lot of energy.  
What does labeling involve?  
This product meets the requirements for the TCO’99 scheme which provides for international and environ-  
mental labeling of personal computers. The labeling scheme was developed as a joint effort by the TCO (The  
Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen (The Swedish Society  
for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy Administration).  
Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of electric  
and magnetic fields, energy consumption and electrical and fire safety.  
The environmental demands impose restrictions on the presence and use of heavy metals, brominated and  
chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The product must  
be prepared for recycling and the manufacturer is obliged to have an environmental policy which must be  
adhered to in each country where the company implements its operational policy.  
The energy requirements include a demand that the computer and/or display, after a certain period of  
inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to  
reactivate the computer shall be reasonable for the user.  
Labeled products must meet strict environmental demands, for example, in respect of the reduction of electric  
and magnetic fields, physical and visual ergonomics and good usability.  
Below you will find a brief summary of the environmental requirements met by this product. The complete  
environmental criteria document may be ordered from:  
TCO Development  
SE-114 94 Stockholm, Sweden  
Fax: + 46 8 782 92 07  
Email (Internet): [email protected]  
Current information regarding TCO’99 approved and labeled products may also be obtained via the Internet,  
English 21  
 
HP 19" Color Monitor User’s Guide  
Environmental Requirements  
Environmental Requirements  
Flame retardants  
Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to  
prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of  
flame retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants are  
chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing  
bromine or chloride and the PCBs are suspected of giving rise to severe health effects, including reproductive  
damage in fish-eating birds and mammals, due to the bio-accumulative* processes. Flame retardants have been  
found in human blood and researchers fear that disturbances in foetus development may occur.  
The relevant TCO’99 demand requires that plastic components weighing more than 25 grams must not  
contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the  
printed circuit boards since no substitutes are available.  
Cadmium**  
Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays.  
Cadmium damages the nervous system and is toxic in high doses. The relevant TCO’99 requirement states  
that batteries, the colour-generating layers of display screens and the electrical or electronics components  
must not contain any cadmium.  
Mercury**  
Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic in  
high doses. The relevant TCO’99 requirement states that batteries may not contain any mercury. It also  
demands that mercury is not present in any of the electrical or electronics components associated with the  
labelled unit.  
CFCs (freons)  
The relevant TCO’99 requirement states that neither CFCs nor HCFCs may be used during the manufacture  
and assembly of the product. CFCs (freons) are sometimes used for washing printed circuit boards. CFCs break  
down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on earth of  
ultraviolet light with e.g. increased risks of skin cancer (malignant melanoma) as a consequence.  
Lead**  
Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous system  
and in higher doses, causes lead poisoning. The relevant TCO’99 requirement permits the inclusion of lead  
since no replacement has yet been developed.  
*
Bio-accumulative is defined as substances which accumulate within living organisms  
** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.  
22 English  
 

Graco Crib 9120 User Manual
Grizzly Saw G1572 User Manual
HANNspree Laptop SN12E2 User Manual
Hans Grohe Plumbing Product 32240XX1 User Manual
Honeywell Satellite Radio SMV 3000 User Manual
HP Hewlett Packard Switch SAS BL User Manual
Hyundai MP3 Player H F2562 User Manual
IBM Laptop 39T5771 User Manual
Ikelite Digital Camera PowerShot A700 User Manual
iLive Clock Radio IC618B User Manual