HP D5065 Series
L1800
18.1 -inch LCD Color Monitor
18.1-inch Viewable Image
User’s Guide
18,1-Zoll-LCD-Farbbildschirm
18,1 Zoll Bildanzeige
Benutzerhandbuch
Moniteur LCD couleur 18,1 pouces
Affichage 18,1 pouces
Guide de l’utilisateur
Monitor LCD en color de 18,1 pulgadas
18,1 pulgadas de imagen visualizada
Manual del Usuario Léase esto primero
Video a colori LCD da 18,1 pollici
18.1 effettivi per l’immagine
Manuale utente
1
Anti-glare, anti-static screen coating
0.28 mm dot pitch for excellent
graphics
Full scan TFT screen that gives
an edge to edge image
On/off switch
Status indicator
Auto-configuration button
Video Input LEDs.
Button to select Video
Input
Button to operate on-screen
menus
Multi-function adjustment control and
browser
HP D5065 Series
L1800 18.1-inch LCD
Color Monitor
User’s Guide
HP 18.1” LCD Color Monitor User’s Guide
Important Safety Instructions
Important Safety Instructions
Please read these safety instructions and the safety instructions contained in
your Quick Setup Guide before plugging in your new monitor.
WARNING
Use only the AC/DC adapter supplied with the product. Connect the monitor
to a grounded power outlet. Use the power cord supplied with this monitor or
one with a properly grounded plug. Ensure that the cable meets your country’s
standards for safety.
To completely disconnect power at the monitor, remove the power cord from
the power outlet. Ensure that the power outlet is easily accessible.
To reduce the risk of electric shock, do not remove cover (or back) and do not
open the AC/DC adaptor. There are no user serviceable parts inside. Refer
servicing to qualified service personnel.
The monitor is quite heavy (the weight is shown in the technical
specifications). We recommend you ask the assistance of a second person
when lifting or moving it.
USA and Canada
If the power cord is not supplied with your monitor, select the proper power
cord according to your national safety codes.
•
•
USA: use a UL Listed type SVT detachable power cord
Canada: use a CSA certified detachable power cord.
Si le cordon secteur n’est pas livré avec votre moniteur, utiliser un cordon
secteur en accord avec votre code électrique national.
•
•
USA: utiliser un cordon secteur UL Listé de type SVT.
Canada: utiliser un cordon secteur certifié CSA.
2 English
HP 18.1” LCD Color Monitor User’s Guide
What Your New Monitor Offers
What Your New Monitor Offers
Your HP monitor is a 18.1-inch (diagonal and viewable image), high resolution,
liquid crystal multi-synchronous color monitor. Multi-synchronous means that
the monitor supports a large range of video modes (see “Supported Video
Modes“ on page 16). It is optimized to be used with all Hewlett-Packard
computers.
Your HP LCD color monitor has the following features:
•
A 18.1-inch Thin Film Transistor (TFT) liquid crystal display. It has a
non-glare, antistatic screen coating.
•
•
•
•
Large viewing angle.
Support of video modes up to 1280 × 1024 at a 75 Hz refresh rate.
Hot key auto-configuration of display position, clock and phase.
1
Power management system (VESA standard) controlled from suitably
equipped HP computers to automatically reduce the power consumption of
the monitor. Complies with the Energy Star Computers Program initiated
2
by the US EPA specification for energy efficient monitors. As an Energy
Star Partner, Hewlett-Packard has determined that this product meets the
3
Energy Star guidelines for energy efficiency.
•
•
Plug and Play capability (compliant with VESA DDC1,DDC2B and DDC2Bi
standards) that enables the monitor to identify itself to suitably equipped
HP computers.
Your HP monitor complies with ISO 9241-3/8 and ZH-1/618 ergonomic
standards.
•
•
Your HP monitor complies with TCO 99 requirements (Some models only).
USB-Hub (Universal Serial Bus-Hub) integrated in the monitor base (some
models only). Allows you to connect one up- and 4 downstream USB
devices.
•
Two signal connectors on the rear panel enabling connection to two
computers.
•
•
Slot for security lock.
A programmable sleep mode timer which can prolong the life of your
monitor.
1.
2.
3.
VESA is the Video Electronics Standards Association
The US EPA is the United States Environmental Protection Agency
ENERGY STAR is a US registered service mark of the US EPA.
English 3
HP 18.1” LCD Color Monitor User’s Guide
Securing Your Monitor
Securing Your Monitor
The monitor can be secured to your desk, or any other fixed object, using a
Kensington lock security cable. The cable can be attached to a slot located on
the rear of the monitor.
1
2
3
Insert the lock in the slot located on the rear of the monitor.
Turn the key to lock the cable to the monitor.
Remove the key and store it in a safe place.
NOTE
The Kesington lock is not an HP accessory. It cannot be ordered from HP.
Contact your reseller for more information.
4 English
HP 18.1” LCD Color Monitor User’s Guide
Connecting Additional Devices to Your Monitor
Connecting Additional Devices to Your Monitor
The following diagram indicates additional devices that can be connected.
Please refer to your Quick Setup Guide (Step 3 - Connecting the Cables)
before connecting any additional devices.
Microphone In
jack
Video Input Connector
Video Input Connector
1
2
Headphone/Speaker
In jack
Headphone/Speaker
Out Jack
Microphone Out
jack
USB Connectors
(Some Models Only)
Connecting Two Computers
Your LCD monitor has two signal connectors located on the rear panel (see
“Selecting Video Input“ on page 11). This enables you to connect your monitor
to two computers at the same time.
USB Connectors
A USB-Hub is integrated in the base of your monitor stand. USB connectors
automate peripheral connection by using plug and play install procedures.
Connect your USB device to your computer as indicated in the Quick Setup
Guide. Connect USB compatible plug and play devices such as a keyboard,
mouse, joystick or digital USB camera (if supported by your computer) to any
of the four remaining downstream connectors.
Connecting Headphones/Speakers and a Microphone
Your monitor provides headphone/speaker and microphone sockets on the
rear panel.
English 5
HP 18.1” LCD Color Monitor User’s Guide
Configuring Your Monitor
Configuring Your Monitor
You can auto configure your monitor, adjust contrast and brightness and
select a video input channel using the controls located on the front panel of
your monitor.
Indicator light
On/Off switch
Video Input LEDs
AUTO button
button
Button to adjust
video input
Control (multi-function control for
adjusting brightness/contrast, menu browser
and adjustment control)
OSD
(On-screen display)
Adjustments to the LCD monitor’s features are made from the OSD
(on-screen display).
1
2
Press
to enter the OSD main menu.
Select the feature you require using the
confirm your selection.
control, then press
to
NOTE
To exit the main menu select EXIT from the OSD main menu. You can exit all
menus at any time by double clicking the
button.
Changing the Language of your OSD
Your OSD operates in several different languages.
To change the language of your OSD main menu:
1
Select
from the OSD menu, then press
to enter the LANGUAGE
submenu.
2
Select a language from the list using the
control, then press
to
confirm your selection and return to the main menu.
6 English
HP 18.1” LCD Color Monitor User’s Guide
Configuring Your Monitor
Optimizing Image Quality
Each time you connect your monitor to a different computer you should use
the HP Optimizer Utility, supplied on floppy disk, to optimize the quality of the
image. This utility displays test patterns that help you configure your monitor
correctly. (For installation instructions, see your Quick Setup Guide).
Adjust the following to optimize image quality:
Brightness and Contrast
To adjust brightness and contrast directly:
1
2
Rotate the adjustment control to select
or
.
Make your adjustments using the control.
It is recommended that you select a value of around 70% for brightness and
50% for contrast.
3
Press
to save your adjustments.
NOTE
You can also adjust the contrast and brightness by selecting
CONTRAST or
BRIGHTNESS from the OSD main menu. Make your adjustments using the
control, then press
to return to the OSD main menu.
Auto-Configuration
If you use auto-configuration you can configure your monitor without having
to adjust your monitor’s position, clock frequency and phase manually. To use
auto-configuration, follow the instructions in your HP Optimizer Utility (for
installation instructions, see your Quick Setup Guide).
NOTE
With auto-configuration it is not necessary to adjust
H POSITION,
V
POSITION CLOCK or PHASE. However, if the results are unsatisfactory,
follow the on-screen instructions in the HP Optimizer Utility to adjust these
options manually.
English 7
HP 18.1” LCD Color Monitor User’s Guide
Configuring Your Monitor
Color
Your monitor displays a combination of red, blue and green to show a full color
image. To change the proportions of red, blue and green, you need to change
the color temperature:
1
2
Select
and press
to enter the COLOR sub menu.
Select the feature you require using the
confirm your selection.
control, then press
to
3
a) If you are selecting a preset color temperature, select EXIT, then press
to return to the main menu.
b) Otherwise, select R, G or B from the USER COLOR submenu that appears and
then press
to confirm your selection.
4
5
Adjust the color level using the
selection.
controls, then press
to save your
Select SAVE AND EXIT, then press
to return to the main menu.
NOTE
To reset the color settings when in the USER COLOR submenu, select RESET and
press to confirm your selection, then continue with Step 5.
Restoring the Default Settings
To return to the position, clock and phase default settings:
1
2
Select
then press
to enter the MODE RECALL sub menu.
control, then press to confirm your selection.
Select YES using the
The monitor image will disappear for a few seconds while the monitor restores
its default settings.
8 English
HP 18.1” LCD Color Monitor User’s Guide
Configuring Your Monitor
Setting the Timer
Your monitor has a time control function that can prolong the lifetime of your
monitor. This enables you to set a time for your monitor to power on and
power off each day. To set the timer:
1
Select
then press
to enter the TIMER submenu.
2
Select the feature you require using the
confirm your selection.
control, then press
to
The following table describes the time control options available:
Menu Item
Use to
Action
Current Time
Set the current local
time
1. Select the hour setting using the
control, then
to confirm
press
to confirm your selection.
2. Select the correct hour, then press
your selection.
Standby Time
On Time
Set the time at
which you wish your
LCD to switch OFF
3. To select the minute setting repeat Steps 1 and 2.
Set the time at
which you wish your
LCD to switch ON
4. When the correct time is set, select EXIT, then press
to return to the TIMER sub menu.
Timer ON/OFF
Switch the timer ON 1. Select ON or OFF using the
or OFF
control.
2. Press
to make your selection and return to
the TIMER sub menu.
3
Select EXIT, then press
to return to the main menu.
NOTE
When the monitor is in power off mode the front panel indicator flashes amber.
To reactivate your monitor when in power off mode, press the on/off button.
Every time your monitor is unplugged you will need to reset your monitor’s
timer.
English 9
HP 18.1” LCD Color Monitor User’s Guide
Configuring Your Monitor
Adjusting the Image Size
If the display properties in your computer are set to a resolution lower than
1280 × 1024, your monitor will be of lower quality when in full-screen mode.
This is due to the approximations made in the scaling process. To display the
image at the optimum quality:
1
Select
from the on-screen main menu and press
to enter the
IMAGE SIZE submenu.
2
Select the feature you require using the
control, then press
to
confirm your selection and return to the mainmenu.
The following table describes the options available:
Image Size
Menu Item
Use to...
FULL SCREEN
ASPECT RATIO
Display the image at a size that fills the entire screen
Display the image at maximum size, while maintaining the aspect ratio of the
original image
1:1
Display the image at actual pixel size
NOTE
If your are using a video resolution of 1280 × 1024, selecting ASPECT RATIO will
not alter the size of the image.
10 English
HP 18.1” LCD Color Monitor User’s Guide
Configuring Your Monitor
Selecting Video Input
The rear of your monitor has two video input connectors to connect one or
two computers (see “Connecting Two Computers, on page 5”). The Video
Input LEDs located on the front panel of the monitor indicate which
connector is receiving input. Use either auto or manual selection to select the
appropriate input option.
Auto Selection
When you first connect your computer to the monitor, the monitor
automatically selects one of the following combinations, depending on which
connector is receiving input.
1
1
AUTO 2
AUTO 2
If two operational computers are connected, the monitor automatically selects
the computer that has input priority (see “Selecting Input Priority“ on page
12). If the monitor detects no input from the computer with priority, it
automatically searches for a signal from the second computer.
Manual Selection
To manually select an input channel, use the video input button
underneath the front panel of the monitor.
located
If you want to receive a signal from a computer connected to
following.
1 select the
1
AUTO 2
If you want to receive a signal from a computer connected to
following:
2 select the
1
AUTO 2
If two operational computers are connected, the monitor is only able to detect
input from the computer connected to the connector selected.
NOTE
To return to auto selection at any time select AUTO.
English 11
HP 18.1” LCD Color Monitor User’s Guide
Configuring Your Monitor
Selecting Input Priority
When your monitor is connected to two computers, you will need to give
priority to one computer. This computer is selected every time you switch on
your monitor and when using auto selection (see “Auto Selection“ on page
11). To choose which computer has priority:
1 :
2
1
Select
sub menu.
from the main menu, then press
to enter the INPUT PRIORITY
2
Select INPUT 1 or INPUT 2 using the adjustment control, then press
to
save your selection and return to the OSD main menu.
The displayed image will disappear for a few seconds. The message INPUT
PRIORITY appears while the monitor makes your selection.
NOTE
Input 1 and Input 2 correspond to connectors 1 and 2 on the rear of the monitor.
Obtaining Information
To obtain information about your monitor, select one of the following main
menu items:
Menu Item
SERIAL NUMBER
Select to...
Display the serial number of your monitor
Display the estimated life span of the monitor’s backlight
BACKLIGHT TIME
MODE INFO
1
Display the video mode currently in use
2
Display the preset modes and user modes available
1. Contains a record of any adjustments that the user makes in the main menu system.
2. Standard configurations pre-loaded at the factory.
12 English
HP 18.1” LCD Color Monitor User’s Guide
Configuring Your Monitor
Changing the OSD Settings
To change the position of the OSD or adjust the length of time each menu is
displayed:
OSD
1
Select
and press
to enter the OSD MANAGER submenu.
2
Select the feature you require using the adjustment control, then press
to confirm your selection.
The following table describes the OSD settings available:
OSD Manager
Menu Item
Use to Adjust...
Action
PROTECTED OSD
OSD TIMEOUT
(See “Protected OSD“ on page 14)
The duration for which your on-screen
menu appears on screen
Adjust the number of seconds using
the adjustment control, then press
to return the OSD
MANAGER submenu.
INFORM ON/OFF
The duration of the information box
that appears on screen when your
monitor is switched on
Select ON or OFF using the
adjustment control, then press
to confirm your selection.
V POSITION
H POSITION
The vertical position of the OSDs
The horizontal position of the OSDs
Adjust the position of the menu
using the adjustment control, then
press
to return to the OSD
MANAGER submenu.
3
Select EXIT, then press
to return to the main menu.
English 13
HP 18.1” LCD Color Monitor User’s Guide
Configuring Your Monitor
Protected OSD
When this mode is selected the user can adjust the brightness/ contrast and
OSD Manager only. To enable or disable protected OSD mode:
1
Select PROTECTED OSD to enter the PROTECTED OSD submenu.
1
2
3
Select each digit of the six figure password using the
each time to confirm your selection.
control, pressing
When you have selected the correct password a sub menu is displayed.
Select YES or NO to select or deselect Protected OSD, then press
to
exit.
Setting the Amount of Displayed Information
To set the amount of displayed information, change the screen resolution of
your computer. The higher the screen resolution, the more information you
can see on the screen. It is recommended that you use a resolution of
1280×1024.
It is recommended that you use a refresh rate of 60 Hz. The image refresh rate
is the number of times per second that the image is redrawn.
To find out which resolutions and refresh rates are supported by your
monitor, refer to “Supported Video Modes” on page 16. To change the screen
resolution, please refer to the manual that came with your computer or your
operating system.
Your monitor has a Plug and Play capability (VESA DDC1, DDC2B, DDC2Bi
standard) that enables it to identify itself to suitably equipped HP computers.
NOTE
LCD technology does not cause any flicker at low refresh rates.
1.
The default password is 040990
14 English
HP 18.1” LCD Color Monitor User’s Guide
Configuring Your Monitor
Minimizing Energy Consumption
If your computer supports VESA monitor power management (available on
many HP computers), you can minimize the power consumed by the monitor.
There are two power saving modes:
1
•
•
Suspend mode (uses less than 5W).
2
Sleep mode (uses less than 5W).
When the monitor enters power saving mode the message POWER SAVING MODE
is displayed for a few seconds before the screen blanks. In power saving mode
the front panel indicator light is amber.
To set these power saving modes, refer to the manual that came with your
computer.
1.
2.
Suspend mode is activated when horizontal sync is cut by the video controller.
Sleep mode is activated when both vertical and horizontal sync are cut by the video controller.
English 15
HP 18.1” LCD Color Monitor User’s Guide
Supported Video Modes
Supported Video Modes
Your monitor comes with the preset modes shown in the table below.
Screen Resolution
640x350
Image Refresh Rate
70 Hz
640x480
60 Hz, 75 Hz, 85 Hz
70 Hz
720x400
800x600
60 Hz, 75 Hz, 85 Hz
75 Hz
832x624
1024x768
1152x870
1152x900
1280x1024
60 Hz, 75 Hz, 85 Hz
75 Hz
66 Hz
60 Hz, 75 Hz
NOTE
Selecting a combination of screen resolution/image refresh rate higher than
1280x1024 at 75 Hz can damage your monitor.
If you select a video mode not supported by your monitor the message SIGNAL
OUT OF RANGE is displayed.
16 English
HP 18.1” LCD Color Monitor User’s Guide
Technical Specifications
Technical Specifications
Size
18.1-inch diagonal and viewable image
LIQUID CRYSTAL MONITOR
Type
TFT liquid crystal display
SXGA 1280x1024 pixels (R,G,B)
0.7 Vp p analog RGB
Pixel pitch
Video
INPUT SIGNAL
INTERFACE
Synchronization
Input Connector
Separated H/V (TTL level)
15-pin mini D-SUB
Horizontal
25 to 82kHz
54 to 88Hz
SCANNING FREQUENCY
Vertical
1280 ×1024 (75 Hz)
MAX. RESOLUTION (H × V)
359(H) x 287(V) mm
AC/DC ADAPTER
IMAGE SIZE
Input Rating: 100-240V ~, 2.0-1.0A,
Output:12V
Frequency: 50/60 Hz
5.8A
POWER SOURCE
Power Consumption: less than 60W in Operating Mode; less
than 70W with USB
Temperature
Humidity
10 °C to 35°C (operating)
OPERATING ENVIRONMENT
STORAGE ENVIRONMENT
20% RH through 80% RH (without condensation)
- 10 °C to +60 °C (storage)
Temperature
Humidity
5% RH through 95% RH (without condensation)
Cabinet: 385(H) x 436(W) x 81(D)
Footprint: 313(W) x 245(D)
DIMENSIONS
With Stand: 12kg (24.25 lbs)
Without Stand: 9.5kg(20.94lbs)
CABINET WEIGHT
Tilt Angle
- 5° to +25°
±30°
TILT/SWIVEL STAND
Swivel Angle
English 17
HP 18.1” LCD Color Monitor User’s Guide
Care and Cleaning
Care and Cleaning
To maximize the screen life-span of this product and prevent damage to the
liquid crystal display, it is recommended that you:
•
•
Do not let liquid get on or into the monitor.
Do not store or use the monitor in locations exposed to heat, direct sunlight,
or extreme cold.
•
Do not store or use the monitor in locations exposed to high humidity or in
a dusty environment.
•
•
•
Do not press sharp or pointed objects against the monitor.
Avoid touching or pressing the screen of the monitor.
Avoid setting contrast and brightness to their maximum levels for
prolonged periods.
•
Switch the monitor off when it is not in use. You can use the timer control
to switch your monitor on and off automatically (see “Setting the Timer“ on
page 9).
Your monitor has an anti-glare, anti-static screen coating. To prevent damage
to the monitor screen’s coating, use a regular household glass cleaner when
cleaning the screen.
To clean the screen:
1
Switch the monitor off and remove the power plug (pull the plug, not the
cable).
2
Soak a soft gauze cloth with isopropyl alcohol or ethyl alcohol and gently
wipe the surface of the monitor. Avoid dusting it or wiping it with a cloth
dampened with water.
3
Dry with a clean, soft cotton cloth.
CAUTION
Do not use cleaning solutions containing fluoride, acids, or alkalis. Do not use
ketone substances such as acetone or solvents such as xylene or toluene to
clean the monitor. Do not use benzene, thinner, ammonia, or any volatile
substance to clean the monitor’s screen or cabinet. These chemicals may
damage the monitor. Never use water to clean an LCD screen.
18 English
HP 18.1” LCD Color Monitor User’s Guide
Environmental Information
Environmental Information
HP has a strong commitment toward the environment. Your HP monitor has
been designed to respect the environment as much as possible.
HP can also take back your old monitor for recycling when it reaches the end
of its useful life.
HP has a product take-back program in several countries. The collected
equipment is sent to one of HP’s recycling facilities in Europe or the USA. As
many parts as possible are reused. The remainder is recycled. Special care is
taken for batteries and other potentially toxic substances, which are reduced
to non-harmful components through a special chemical process. If you require
more details about HP’s product take-back program, contact your dealer or
your nearest HP Sales Office.
English 19
HP 18.1” LCD Color Monitor User’s Guide
Warranty
Warranty
PART I - HP General Hardware Warranty
General
This HP Monitor Hardware Warranty Statement gives you, the customer, express
warranty rights from HP, the manufacturer.
FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW ZEALAND: THE
WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT
LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT OR MODIFY AND ARE IN
ADDITION TO THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE
OF THIS PRODUCT TO YOU.
THE LAWS OF YOUR COUNTRY MAY PROVIDE FOR DIFFERENT WARRANTY
RIGHTS. IF SO, YOUR AUTHORIZED HP DEALER OR HP SALES AND SERVICE
OFFICE CAN PROVIDE YOU WITH DETAILS.
Warranty repair or replacement
Model
Warranty Period
Service provided
Model D5065 Series
3 years—unless original end-user
customer has otherwise agreed to a
shorter period of warranty at the time
of purchase.
On-site service for first year, and
return to an HP or repair-authorized
service-center for the following two
years.
Hewlett-Packard (HP) warrants this monitor hardware product, or accessory against
defects in materials and workmanship for the applicable warranty period stated above,
commencing from the date of delivery of the product to the end-user customer.
HP does not warrant that the HP hardware will operate uninterrupted or error free.
If, during the product warranty period, HP is unable, within a reasonable time, to repair
or replace your product to the condition as warranted, you will be entitled to a refund
(in the amount of the product purchase price) upon prompt return of the product to
your authorized HP dealer or other HP designate. Unless otherwise stated or agreed
upon in writing with HP, all hardware components must be returned for refund with
the entire system process unit.
HP software is covered by the HP Software Product Limited Warranty located in your
HP product manual.
20 English
HP 18.1” LCD Color Monitor User’s Guide
Warranty
Unless otherwise stated, and to the extent permitted by local law, hardware products
may contain remanufactured parts (equivalent to new in performance) or parts which
may have been subject to prior incidental use. HP may repair or replace hardware
products (i) with products which are equivalent in performance to the products being
repaired or replaced but which may have been subject to prior use, or (ii) with
products which may contain remanufactured parts equivalent to new in performance
or parts which may have been subject to prior incidental use.
Proof of Purchase and Warranty Period
In order to receive service or support for your hardware product for the warranty
period, proof of the original purchase date of the product may be required in order to
establish the delivery date of your product. If the delivery date is not available, either
the purchase date or the manufacturer's date (located on the product) becomes the
beginning of the warranty period.
Limitation of Warranty
Warranty does not apply to defects resulting from: (a) improper or inadequate
maintenance or calibration; (b) software, interfacing, parts or supplies not supplied by
HP; (c) unauthorized repair, maintenance, modification or misuse; (d) operation
outside of the published operating specifications for the product; (e) improper site
preparation or maintenance; or (f) such other exclusions as may be expressly set forth
in this Warranty Statement.
HP MAKES NO OTHER EXPRESS WARRANTY, WHETHER WRITTEN OR ORAL,
WITH RESPECT TO THIS PRODUCT.
TO THE EXTENT ALLOWED BY APPLICABLE LOCAL LAW, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY SET FORTH
ABOVE.
Limitation of Liability and Remedies
TO THE EXTENT ALLOWED BY APPLICABLE LOCAL LAW, THE REMEDIES IN
THIS WARRANTY STATEMENT ARE YOUR SOLE AND EXCLUSIVE REMEDIES. IN
NO EVENT SHALL HP BE LIABLE FOR LOSS OF DATA OR FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGE, WHETHER BASED ON
WARRANTY CONTRACT, TORT, OR ANY OTHER LEGAL THEORY.
The foregoing limitation of liability shall not apply in the event that any HP product
sold hereunder is determined by a court of competent jurisdiction to be defective and
to have directly caused bodily injury, death, or property damage. To the extent allowed
by applicable local law, HP's liability for property damage does not exceed the greater
of $50,000 or the purchase price of the specific product that caused such damage.
English 21
HP 18.1” LCD Color Monitor User’s Guide
Warranty
LCD Monitor Quality and Pixel Policy
Your Hewlett-Packard TFT monitor uses high precision technology, manufactured
according to HP standards, to guarantee trouble-free personal computing.
Nevertheless, your monitor may have cosmetic imperfections which could appear as
small bright or dark spots. This is common to all TFT monitors used in products
supplied by all vendors and is not specific to the HP D5065 Series monitor.
Please refer to the HP electronic services for more and detailed information on the
pixel policy for the HP D5065 Series monitor.
HP expects that, over time, the industry will continue to improve their ability to
produce monitors with fewer cosmetic imperfections and will adjust the HP guidelines
as improvements are made.
PART II - HP Software Product License Agreement and Software Product
Limited Warranty
General
HP may provide one or more software programs for this monitor on a separate media.
Please read the Software License Agreement before proceeding.
CAREFULLY READ THIS LICENSE AGREEMENT AND LIMITED WARRANTY
STATEMENT BEFORE PROCEEDING TO OPERATE THE USE OF THE SOFTWARE.
RIGHTS IN THE SOFTWARE ARE OFFERED ONLY ON THE CONDITION THAT THE
CUSTOMER AGREES TO ALL TERMS AND CONDITIONS OF THE LICENSE
AGREEMENT. PROCEEDING TO USE OF THIS SOFTWARE INDICATES YOUR
ACCEPTANCE OF THESE TERMS AND CONDITIONS. IF YOU DO NOT AGREE
WITH THE TERMS OF THE LICENSE AGREEMENT, YOU MUST NOW RETURN THE
COMPLETE MONITOR AND SOFTWARE FOR A FULL REFUND.
PROCEEDING WITH CONFIGURATION SIGNIFIES YOUR ACCEPTANCE OF THE
LICENSE TERMS.
HP Software Product License Agreement
UNLESS OTHERWISE STATED BELOW, THIS HP SOFTWARE PRODUCT LICENSE
AGREEMENT SHALL GOVERN THE USE OF ALL SOFTWARE THAT IS PROVIDED
TO YOU, THE CUSTOMER, AS PART OF THE HP MONITOR PRODUCT. IT SHALL
SUPERSEDE ANY NON-HP SOFTWARE LICENSE TERMS THAT MAY BE FOUND
ONLINE, OR IN ANY DOCUMENTATION OR OTHER MATERIALS CONTAINED IN
THE MONITOR PRODUCT PACKAGING.
The following License Terms govern the use of the software:
USE Customer may use the software on any one computer. Customer may not network
the software or otherwise use it on more than one computer. Customer may not
reverse assemble or decompile the software unless authorized by law.
22 English
HP 18.1” LCD Color Monitor User’s Guide
Warranty
COPIES AND ADAPTATIONS Customer may make copies or adaptations of the software (a)
for archival purposes or (b) when copying or adaptation is an essential step in the use
of the software with a computer so long as the copies and adaptations are used in no
other manner.
OWNERSHIP The software is owned and copyrighted by HP or its third party suppliers.
Customer agrees that he/she does not have any title or ownership of the software,
other than ownership of the physical media. Customer acknowledges and agrees that
the software is copyrighted and protected under the copyright laws. Customer
acknowledges and agrees that the software may have been developed by a third party
software supplier named in the copyright notices included with the software, who shall
be authorized to hold the Customer responsible for any copyright infringement or
violation of this Agreement.
TRANSFER OF RIGHTS IN SOFTWARE Customer may transfer rights in the software to a third
party only as part of the transfer of all rights and only if Customer obtains the prior
agreement of the third party to be bound by the terms of this License Agreement. Upon
such a transfer, Customer agrees that his/her rights in the software are terminated and
that he/she will either destroy his/her copies and adaptations or deliver them to the
third party.
SUBLICENSING AND DISTRIBUTION Customer may not lease, sublicense the software or
distribute copies or adaptations of the software to the public in physical media or by
telecommunication without the prior written consent of Hewlett -Packard.
TERMINATION Hewlett-Packard may terminate this software license for failure to comply
with any of these terms provided Hewlett-Packard has requested Customer to cure the
failure and Customer has failed to do so within thirty (30) days of such notice.
UPDATES AND UPGRADES Customer agrees that the software does not include updates and
upgrades which may be available from Hewlett-Packard under a separate support
agreement.
EXPORT CLAUSE Customer agrees not to export or re-export the software or any copy or
adaptation in violation of the U.S. Export Administration regulations or other
applicable regulation.
U.S. GOVERNMENT RESTRICTED RIGHTS Use, duplication, or disclosure by the U.S.
Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the
Rights in Technical Data and Computer Software clause in DFARS 252.227-7013.
Hewlett-Packard Company, 3000 Hanover Street, Palo Alto, CA 94304 U.S.A. Rights for
non-DOD U.S. Government Departments and Agencies are as set forth in FAR
52.227-19(c)(1,2).
English 23
HP 18.1” LCD Color Monitor User’s Guide
Warranty
HP Software Product Limited Warranty
THIS HP SOFTWARE PRODUCT LIMITED WARRANTY SHALL COVER ALL
SOFTWARE THAT IS PROVIDED TO YOU, THE CUSTOMER, AS PART OF THE HP
MONITOR PRODUCT. IT SHALL SUPERSEDE ANY NON-HP WARRANTY TERMS
THAT MAY BE FOUND ONLINE, OR IN ANY DOCUMENTATION OR OTHER
MATERIALS CONTAINED IN THE MONITOR PRODUCT PACKAGING.
Ninety-Day Limited Software Warranty. HP warrants for a period of NINETY (90) DAYS from
the date of the purchase that the software product will execute its programming
instructions when all files are properly installed. HP does not warrant that the software
will be uninterrupted or error free. In the event that this software product fails to
execute its programming instructions during the warranty period, Customer' s remedy
shall be a refund or repair. Should HP be unable to replace the media within a
reasonable amount of time, Customer's alternate remedy shall be a refund of the
purchase price upon return of the product and all copies.
Removable Media (If supplied) HP warrants the removable media, if supplied, upon which
this product is recorded to be free from defects in materials and workmanship under
normal use for a period of NINETY (90) DAYS from the date of purchase. In the event
the media proves to be defective during the warranty period, Customer's remedy shall
be to return the media to HP for replacement. Should HP be unable to replace the
media within a reasonable amount of time, Customer's alternate remedy shall be a
refund of the purchase price upon return of the product and destruction of all other
non-removable media copies of the software product.
NOTICE OF WARRANTY CLAIMS Customer must notify HP in writing of any warranty claim
not later than thirty (30) days after the expiration of the warranty period.
LIMITATION OF WARRANTY HP makes no other express warranty, whether written or oral
with respect to this product. Any implied warranty of merchantability or fitness for a
particular purpose is limited to the 90-day duration of this written warranty. Some
states or provinces do not allow limitations on how long an implied warranty lasts, so
the above limitation or exclusion may not apply to you. This warranty gives specific
legal rights, and you may also have other rights which vary from state to state, or
province to province.
LIMITATION OF LIABILITY AND REMEDIES THE REMEDIES PROVIDED ABOVE ARE
CUSTOMER'S SOLE AND EXCLUSIVE REMEDIES. IN NO EVENT SHALL HP BE
LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFIT) WHETHER BASED ON
WARRANTY, CONTRACT, TORT OR ANY OTHER LEGAL THEORY. Some states or
provinces do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you.
24 English
HP 18.1” LCD Color Monitor User’s Guide
Warranty
OBTAINING WARRANTY SERVICE Warranty service may be obtained from the nearest HP
sales office or other location indicated in the owner's manual or service booklet.
FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW ZEALAND: THE
WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT
LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT, OR MODIFY BUT ARE IN
ADDITION TO THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE
OF THIS PRODUCT TO YOU.
PART III - Year 2000 Warranty
Subject to all of the terms and limitations of the HP Limited Warranty Statement
provided with this HP Product, HP warrants that this HP Product will be able to
accurately process date data (including, but not limited to, calculating, comparing, and
sequencing) from, into, and between the twentieth and twenty-first centuries, and the
years 1999 and 2000, including leap year calculations, when used in accordance with
the Product documentation provided by HP (including any instructions for installing
patches or upgrades), provided that all other products (e.g. hardware, software,
firmware) used in combination with such HP Product(s) properly exchange date data
with it. The duration of the Year 2000 warranty extends through January 31, 2001.
English 25
HP 18.1” LCD Color Monitor User’s Guide
Regulatory Information
Regulatory Information
DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name:
HEWLETT-PACKARD France
Manufacturer’s Address:
5, Avenue Raymond Chanas - EYBENS
38053 GRENOBLE CEDEX 09 - FRANCE
Declares, that the product:
HP L1800 18.1-inch LCD Color Monitor
D5065* Series
Product Name:
Model Number:
Conforms to the following Product Specifications:
SAFETY International: IEC 60950:1991 + A1 + A2 +A3 +A4
Europe: EN 60950:1992 + A1 + A2 +A3 +A4
EMC CISPR 22:1993+A1 +A2/ EN 55022:1994+ A1 + A2- Class B 1)
EN 50082-1:1992
IEC 801-2:1992 / prEN 55024-2:1992 - 4kV CD, 8 kV AD
IEC 801-3:1984- 3V/m
IEC 801-4:1988 / prEN 55024-4:1992 - 1 kV Power Lines
IEC 555-2:1982 + A1:1985 / EN 60555-2:1987
IEC 1000-3-3:1994 / EN 61000-3-3:1995
- FCC Title 47 CFR, Part 15 Class B2
- ICES-003, Issue 2
- VCCI-B
- AS/NZ 3548:1992
Supplementary information: The product herewith complies with the requirements of the following Directives and carries the CE mark accordingly:
EMC Directive 89/336/EEC, the Low Voltage Directive 73/23/EEC both amended by the Directive 93/68/EEC.
1)The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
2)This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1)This device may not cause harmful interference and
2)This device must accept any interference received, including interference that may cause undesired operation.
* Denotes alphabetic character for additional features.
Jean Marc JULIA
Quality Manager
Grenoble, February 1999.
For Compliance Information ONLY, contact: USA contact: Hewlett Packard Company Corporate Product Regulations Manager 3000 Hanover Street,Palo
Alto, CA 94304. (Phone (415) 857-1501)
26 English
HP 18.1” LCD Color Monitor User’s Guide
Regulatory Information
Notice for the USA: FCC Statement
Federal Communications Commission (FCC) Radio
Frequency Interference Statement (USA Only)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protections against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to correct the interference by one or more of the
following measures:
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
•
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Hewlett-Packard’s FCC Compliance Tests were conducted with HP-supported peripheral devices and HP
shielded cables, such as those you receive with your system. Cables used with this computer must be properly
shielded to comply with the requirements of FCC.
Changes or modifications not expressly approved by Hewlett-Packard could void the user’s authority to operate
the equipment.
Notice for Canada
This Class “B” digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
General Notice
The HP D5065 Series 18.1-inch LCD Color Monitor has been tested according to MPR 1990:8 for Emission
properties and meets the guidelines as given by MPR 1990:10 (2.01 - 2.04).
English 27
HP 18.1” LCD Color Monitor User’s Guide
Regulatory Information
Notice for Japan
28 English
HP 18.1” LCD Color Monitor User’s Guide
TCO 99 - Ecology Energy Emissions Ergonomics
TCO 99 - Ecology Energy Emissions Ergonomics
Congratulations! You have just purchased a TCO'99 approved and labelled product! Your choice has provided
you with a product developed for professional use. Your purchase has also contributed to reducing the burden
on the environment and also to the further development of environmentally adapted electronics products.
Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an established method for encouraging the adaptation of
goods and services to the environment. The main problem, as far as computers and other electronics equipment
are concerned, is that environmentally harmful substances are used both in the products and during their
manufacture. Since it is not so far possible to satisfactorily recycle the majority of electronics equipment, most
of these potentially damaging substances sooner or later enter nature.
There are also other characteristics of a computer, such as energy consumption levels, that are important from
the viewpoints of both the work (internal) and natural (external) environments. Since all methods of electricity
generation have a negative effect on the environment (e.g. acidic and climate-influencing emissions, radioactive
waste), it is vital to save energy. Electronics equipment in offices is often left running continuously and thereby
consumes a lot of energy.
What does labelling involve?
This product meets the requirements for the TCO'99 scheme which provides for international and
environmental labelling of personal computers. The labelling scheme was developed as a joint effort by the TCO
(The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen (The Swedish
Society for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy Administration).
Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of electric
and magnetic fields, energy consumption and electrical and fire safety.
The environmental demands impose restrictions on the presence and use of heavy metals, brominated and
chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The product must be
prepared for recycling and the manufacturer is obliged to have an environmental policy which must be adhered
to in each country where the company implements its operational policy.
The energy requirements include a demand that the computer and/or monitor, after a certain period of
inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to
reactivate the computer shall be reasonable for the user.
Labelled products must meet strict environmental demands, for example, in respect of the reduction of electric
and magnetic fields, physical and visual ergonomics and good usability.
Below you will find a brief summary of the environmental requirements met by this product. The complete
environmental criteria document may be ordered from:
TCO Development
SE-114 94 Stockholm, Sweden
Fax: +46 8 782 92 07
Email (Internet): [email protected]
Current information regarding TCO'99 approved and labelled products may also be obtained via the Internet,
using the address:
English 29
HP 18.1” LCD Color Monitor User’s Guide
TCO 99 - Ecology Energy Emissions Ergonomics
Environmental requirements
Flame retardants
Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to
prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame
retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants are
chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing
bromine or chloride and the PCBs are suspected of giving rise to severe health effects, including reproductive
damage in fish-eating birds and mammals, due to the bio-accumulative1 processes. Flame retardants have been
found in human blood and researchers fear that disturbances in foetus development may occur.
The relevant TCO'99 demand requires that plastic components weighing more than 25 grams must not contain
flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed circuit
boards since no substitutes are available.
Cadmium2
Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer monitors.
Cadmium damages the nervous system and is toxic in high doses. The relevant TCO'99 requirement states that
batteries, the colour-generating layers of monitor screens and the electrical or electronics components must not
contain any cadmium.
Mercury2.
Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic in high
doses. The relevant TCO'99 requirement states that batteries may not contain any mercury. It also demands
that mercury is not present in any of the electrical or electronics components associated with the labelled unit.
CFCs (freons)
The relevant TCO'99 requirement states that neither CFCs nor HCFCs may be used during the manufacture and
assembly of the product. CFCs (freons) are sometimes used for washing printed circuit boards. CFCs break
down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on earth of
ultraviolet light with e.g. increased risks of skin cancer (malignant melanoma) as a consequence.
Lead2.
Lead can be found in picture tubes, monitor screens, solders and capacitors. Lead damages the nervous system
and in higher doses, causes lead poisoning. The relevant TCO´99 requirement permits the inclusion of lead since
no replacement has yet been developed.
1.
2.
Bio-accumulative is defined as substances which accommodate within living organisms.
Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative
30 English
Paper not bleached with chlorine
Part Number : 5969-1980
Printed 07/99 in
|