Grizzly Automobile Parts G8724 User Manual

MODEL  
G8724/G8725/G8726  
BOTTLE JACK  
INSTRUCTION SHEET  
Specifications  
Model: G8724 2-Ton Bottle Jack  
—Maximum Load: 4,000 lbs (2 Tons).  
—Minimum Compressed Height: 7".  
—Maximum Extended Height: 14".  
To reduce the risk of property damage,  
serious personal injury, or death when  
using this bottle jack, take the following  
precautions:  
Model: G8725 4-Ton Bottle Jack  
—Maximum Load: 8,000 lbs (4 Tons).  
—Minimum Compressed Height: 8".  
—Maximum Extended Height: 1512".  
Do not overload this bottle jack beyond  
its vertically applied load rating.  
Do not enter a vehicle supported by  
bottle jack. Never allow anyone to work  
under a vehicle supported by one or  
more bottle jacks. Use jack stands  
to support a vehicle, NEVER use or  
leave bottle jacks as the only vehicle  
supports.  
Model: G8726 6-Ton Bottle Jack  
—Maximum Load: 12,000 lbs (6 Tons).  
—Minimum Compressed Height: 812".  
—Maximum Extended Height: 1712".  
ONLY use this bottle jack on a hard  
level surface capable of sustaining the  
load being lifted.  
Only use the bottle jack at appropriate  
points on the vehicle that can safely  
support the vehicle's weight.  
Always make sure that when the vehicle  
is being lifted the jack or lifting point  
does not shift and possibly cause an  
unsafe lifting condition.  
Always apply the parking brake, and  
use wheel chocks against the tires to  
prevent accidental rolling.  
Keep as much of your body as possible  
out from underneath the vehicle when  
placing or removing the stands.  
Never modify this bottle jack.  
Any bottle jack repair must only be  
performed by a qualified hydraulic  
specialist.  
Never release the jack quickly so the  
vehicle drops and slams onto the  
wheels or jack stands.  
Never allow children to play with or near  
bottle jacks while in use or in storage.  
Setup  
1. Use Figure 1 to become familiar with the  
terms used to describe your new jack and  
inspect the unit for any shipping damage.  
Ram With Gripping Elevation Screw  
Fulcrum  
Valve  
Control  
Socket  
Assembly  
Telescoping  
Handle  
Cylinder and  
Reservoir  
Release  
Valve  
Piston  
Pump  
Figure 1. Jack terminology.  
2. With the ram completely retracted into the  
cylinder, remove the rubber plug (Figure 2),  
fill the reservoir with any standard hydraulic  
oil until oil runs from the port. Reinstall the  
plug.  
 

Graco Car Seat 8491 User Manual
Grizzly Drill G0704 User Manual
Hamilton Beach Coffeemaker 840154301 User Manual
HANNspree Flat Panel Television 1506 0B86000 User Manual
Harbor Freight Tools Vacuum Cleaner 98399 User Manual
Hotpoint Washer AQXXF 149 H PI User Manual
HP Hewlett Packard Printer 1120C User Manual
Hyundai Car Video System H CDM8042 User Manual
IDEAL INDUSTRIES Boiler 30 User Manual
Impex Home Gym WM 1407 User Manual