PERFECT CHILL™
WINE CHILLER
USE AND CARE MANUAL
MODEL 88065 – 21 Bottle Dual Temperature Zone Wine Chiller
SAFETY INFORMATION------------------------------------------------------------ 2
WELCOME------------------------------------------------------------------------------------ 2
IMPORTANT SAFETY INSTRUCTIONS--------------------------------------------------- 2
DISPOSAL OF OLD WINE CHILLER------------------------------------------------------ 3
GROUNDING-------------------------------------------------------------------------------- 4
PRODUCT DIAGRAM----------------------------------------------------------------------- 5
TEMPERATURE CONTROL PANEL-------------------------------------------------------- 5
SPECIFICATIONS--------------------------------------------------------------------------- 5
OPERATING THE WINE CHILLER------------------------------------------------- 6
SETTING UP THE WINE CHILLER-------------------------------------------------------- 6
UNPACKING--------------------------------------------------------------------------------- 6
ASSEMBLING THE DOOR------------------------------------------------------------------ 6
WOOD RACKS IN THE CHILLER---------------------------------------------------------- 6
LOCATION OF THE CHILLER-------------------------------------------------------------- 6
INSTALLATION INSTRUCTIONS---------------------------------------------------------- 7
ADJUSTING THE LEGS--------------------------------------------------------------------- 7
TURNING ON THE POWER---------------------------------------------------------------- 7
INTERIOR LIGHT--------------------------------------------------------------------------- 7
PLACING THE WINE IN THE CHILLER-------------------------------------------------- 7
ADJUSTING THE TEMPERATURE--------------------------------------------------------- 8
SETTING THE TEMPERATURE FOR THE TOP AND LOWER SECTIONS------------ 8
IDEAL SETTING FOR DIFFERENT WINES---------------------------------------------- 8
CARE AND CLEANING-------------------------------------------------------------- 9
CLEANING THE INTERIOR AND EXTERIOR-------------------------------------------- 9
DEFROSTING THE WINE CHILLER------------------------------------------------------- 9
IN THE EVENT OF A POWER FAILURE-------------------------------------------------- 9
CLEANING THE DUST FILTER/SCREEN------------------------------------------------- 9
PREPARING FOR VACATION-------------------------------------------------------------- 9
TRANSPORTING THE WINE CHILLER--------------------------------------------------- 9
TROUBLESHOOTING--------------------------------------------------------------- 10-11
CONSUMER SUPPORT------------------------------------------------------------- 12
WARRANTY------------------------------------------------------------------------- 12
The Honeywell Trademark is used under license from Honeywell Intellectual Properties Inc.
5)
6)
As with any appliance, close supervision is necessary when used by children.
Do not attempt to service the appliance. This appliance must be serviced only
by a qualified technician.
7)
8)
9)
Do not operate this appliance if the power cord or plug has been damaged.
Do not operate if the appliance has been damaged or dropped.
Do not use this product near water – for example, near a kitchen sink, in a
wet basement, near a swimming pool, or similar locations.
10)
11)
12)
Do not immerse cord or plug in water.
Keep this appliance away from hot surfaces and open flames.
This appliance is intended for household use only. Do not use this
appliance outdoors.
13)
14)
Unplug the appliance before cleaning or wiping up spilled liquids.
Do not allow children to climb, stand or hang on the outside of this appliance,
or on the shelves inside the unit. This could tip the appliance over and
seriously injure them.
15) Save these Instructions!
DISPOSAL INSTRUCTIONS
If you are getting rid of your old wine chiller, please follow these instructions
to help prevent accidents.
BEFORE YOU THROW AWAY YOUR OLD WINE CHILLER:
1) Take off the doors and discard separately.
2) Leave the shelves in place so that children may not easily climb inside.
REFRIGERANT DISPOSAL (applies only to Compressor Cooling units):
Your old wine chiller may have used a regulated refrigerant in its cooling system.
These refrigerants are believed to harm Stratospheric Ozone. If you are throwing
away your old chiller, make sure the refrigerant is removed and recovered for
proper disposal by an EPA-certified technician. If you intentionally release this
refrigerant, you can be subject to fines and imprisonment under provisions of
environmental legislation.
If the chiller door has a lock, please disable.
3
IMPORTANT GROUNDING INSTRUCTIONS
and use of extension cords
The Wine Chiller must be grounded. In the
event of an electrical short circuit,
grounding reduces the risk of electric shock
by providing an escape wire for the electric
current. This appliance is equipped with a
cord having a grounding wire with a
grounding plug. The plug must be plugged
into an outlet that is properly installed and
grounded. If the outlet is a standard 2-
prong wall outlet, it is your personal
responsibility and obligation to have it
replaced with a properly grounded 3-prong
wall outlet. Do not under any
circumstances cut or remove the third
(ground) prong from the power cord.
WARNING-Improper use of grounding
can result in a risk of electric shock.
Consult a qualified electrician or serviceman
if the grounding instructions are not
completely understood, or if doubt exists as
to whether the appliance is properly
grounded and either:
1.
If it is necessary to use an extension
cord, use only a 3-wire extension
cord that has a 3-prong grounding
plug, and a 3-slot receptacle that will
accept the plug on the appliance. The
marked electrical rating of the
extension cord shall be equal to or
greater than the rating of the
appliance, or
2.
If the power supply cord is too short,
have a qualified electrician or
serviceman install an outlet near the
appliance.
4
PRODUCT DIAGRAM
1.
2.
1.
2.
3.
4.
5.
6.
7.
8.
9.
HINGE COVER
INTERNAL LIGHT
CONTROL PANEL
FAN COVER
SHELF
7.
8.
3.
4.
9.
FOOT
DOOR FRAME
GLASS DOOR
DOOR HANDLE
5.
6.
CONTROL PANEL ON THE FRONT OF THE DOOR OF THE CHILLER
Controls for the Top Section
Controls for the Lower Section
Light ON/OFF
Button
Temperature
Control Buttons
Temperature
Control Buttons
Light ON/OFF
Button
LED Digital
Display
LED Digital
Display
SPECIFICATIONS
Model--------------------------- 88065
Power Source------------------ 110V ~ 60Hz
Capacity------------------------ 21 Wine Bottles
Temperature Range---------- Top Zone: 7°C (45°F) - 18°C (65°F)
Bottom Zone: 10°C (50°F) - 18°C (65°F)
Chiller Dimensions------------ 34.0 (L) x 51.5 (D) x 82.0 (H) cm
13.4 (L) X 20.3 (D) x 32.3 (H) inches
Chiller Weight------------------ 21 kgs / 46 lbs
5
SETTING UP THE WINE CHILLER
UNPACKING
Remove all packing materials and accessories. Examine the chiller for any damage such as
dents or broken door. Do not install if chiller is damaged.
Allow the chiller to stand upright for approximately 2 hours before connecting the power
source.
If discarding an old chiller, please see “Important Safety Instructions” on page 3.
ASSEMBLING THE DOOR
1)
2)
Screw
3)
Rubber Seal
Door Panel
To save shipping space and avoid damage of the
wine chiller during transportation, the door handle
of this unit is shipped unassembled. Before setting
up the chiller, please assemble the door handle as
follows:
Door handle 4)
1.
2.
Locate the door handle and 2 screws attached
inside the cabinet.
With the 2 screws attached, fasten the door handle
onto the frame of the door panel as illustrated.
3.
4.
You may be required to pull away a section of the
rubber seal to find the screw holes. Simply pull off
the seal and place back into the grooves.
WOOD RACKS IN THE CHILLER
The wine chiller comes with wood racks. They are already in place in the chiller upon
delivery. For your convenience, they easily slide in and out. If you remove the racks for
any reason, make sure the wood attached edge always faces out when placing them back
in the chiller.
LOCATION OF THE CHILLER
Find a suitable area for your wine chiller. Do not place the chiller outside, or any other
place where the chiller will be exposed to water or other harsh weather conditions. The
chiller must not be placed in environments where the ambient temperature drops
below 18°C (65°F ) degrees or goes above 29°C (85°F) degrees. The ideal ambient
temperature is 22.2°C (72°F).
CAUTION: DO NOT PLACE THE WINE CHILLER IN A COLD LOCATION. IT
WILL INCREASE THE RISK OF FREEZING.
6
SETTING UP THE WINE CHILLER
INSTALLATION INSTRUCTIONS
10 cm / 4” inches
The wine chiller is a free standing appliance and can be
installed next to counters and walls. It must not be placed
under a counter.
wall
5 cm /
2” inches
back
For the chiller to function properly, it is important to have a
clearance of at least 10 centimeters (4” inches) from the
back of the chiller to the surface next it. A clearance of at
least 5 centimeters (2” inches) is required from each side of
the chiller to the surface next to it.
Top of
the chiller
front
Make sure the dust filter/screen is securely in place in the
back of the unit.
NOTE: THE SPACING IS NECESSARY FOR PROPER VENTILATION
ADJUSTING THE LEGS OF THE CHILLER
ADJUSTABLE LEG
The wine chiller has adjustable legs on the front of the unit.
These legs can be used to adjust the height and stabilize the
unit. To lengthen the leg turn the leg counter-clockwise and to
shorten the leg turn clockwise.
TURNING ON THE POWER
Unpack the power cord from the back of the wine chiller. Plug the chiller into a suitable 120V
three prong power outlet. The chiller will immediately start running and the interiors light may
initially turn on.
To turn the lights ON press the button with the light bulb symbol next to
CONTROL PANEL
it. The button on the left side of the control panel controls the light
located in the top section and the button on the right side of the control
panel controls the light located in the lower section. To turn them OFF
press the same button.
The interior light source of the wine chiller consists of LED lighting which is a long lasting and
very energy efficient. LED lights will usually last for many years. It is not replaceable.
PLACING WINE IN THE CHILLER
Allow the wine chiller to cool for up to 1 – 2 hours before loading. After three hours of cooling
the chiller will reach an approximate temperature of 13°C (55.4°F) degrees.
When placing both white and red wine into the chiller, please keep in mind that the top section
of the chiller can reach the coolest temperatures and the lower section of the chiller will reach
warmer temperatures.
7
SETTING UP THE WINE CHILLER
ADJUSTING THE TEMPERATURE
The internal temperature range of the top section in the wine chiller is 7°C (45°F) to 18°C
(65°F), while the temperature range of the lower section is 10°C (50°F) to 18°C (65°F).
To adjust the temperatures please follow these instructions:
CONTROL PANEL ON THE FRONT OF THE CHILLER DOOR
SETTING THE TEMPERATURE FOR THE TOP SECTION AND LOWER SECTION
The temperature of the top section (left side of control panel) of the wine chiller can be set
anywhere between 7°C (45°F) to 18°C (65°F) by the temperature up ▲ button and
temperature down ▼button.
The temperature of the lower section (right side of control panel) of the wine chiller can be set
anywhere between 10°C (50°F) to 18°C (65°F) by the temperature up ▲ button and
temperature down ▼button.
Press the up ▲ button to increase the temperature and the down ▼ button to decrease the
temperature.
The temperature displayed on the control panel is the actual temperature inside the wine
chiller. When setting the desired temperature, the set temperature will be displayed for 3
seconds. After which, the temperature display will return to displaying the actual internal
temperature.
Seasonal Changes:
If the outside temperature is warmer, such as in the summer, the internal temperature of the
wine chiller becomes warmer. Set the wine chiller to a lower temperature.
If the outside temperature is cooler, such as in the winter, the internal temperature becomes
cooler and can freeze. Set the wine chiller to a higher temperature.
NOTE: PLEASE BE CAUTIOUS OF THE AMBIENT TEMPERATURE SURROUNDING THE
WINE CHILLER
IDEAL SETTINGS FOR DIFFERENT WINES
Red wines……………………....………….. 15°C – 18°C (59°F - 65°F )
Rosés………………………………………..……………..…… 12°C (54°F)
White wines / Champagnes……………….. 7°C – 9°C (45°F - 48°F)
Other Sweet White wines………...…………………………. 7°C (45°F)
8
CARE AND CLEANING
TO CLEAN THE INSIDE AND THE EXTERIOR OF THE WINE
CHILLER
Always unplug the chiller before cleaning. Do not use a hard brush or sponge. Use
appropriate stainless steel cleaner when cleaning the door frame of the chiller. When
cleaning the body of the chiller, use light soapy water with a soft cloth. When cleaning the
inside DO NOT use soap or any detergent products. Use only a dry, soft cloth or towel.
DEFROSTING THE WINE CHILLER
If frost builds up in and around the chiller, that means there is too much humidity near the
unit. Unplug the chiller and once the frost melts, carefully wipe down the outside or inside of
the chiller.
NOTE: DO NOT USE A HEATER OR A SHARP UTENSIL TO REMOVE THE FROST.
IN THE EVENT OF A POWER FAILURE
In the event of a power failure, do not open the wine chiller door too frequently to
ensure the internal temperature remains the same. A slight and gradual increase in
temperature should have no effect on the wine.
If the ambient temperature is very hot, remove the wine from the chiller and place in a
cooler environment.
CLEANING THE DUST FILTER/SCREEN
It is recommended that the dust filter/screen be cleaned every 6 months. Build up of dirt,
dust, and other debris can decrease the efficiency of the cooling system. To clean the
filter/screen, use a vacuum cleaner or a compressed air container. When using a compressed
air container, please follow the directions and safety regulations of that product.
PREPARING THE WINE CHILLER FOR VACATION
For long vacations or absences, remove all bottles from the wine chiller and unplug the power
supply. Move the thermostat to the lowest temperature setting before cleaning the interior
and leave the door open.
TRANSPORTING THE WINE CHILLER
For transporting the wine chiller, secure all loose items, such as shelves by taping them
securely in place to prevent damage.
NOTE: BE SURE THE WINE CHILLER STAYS IN AN UPRIGHT POSITION DURING
TRANSPORTING.
9
TROUBLE SHOOTING
PROBLEM
POSSIBLE CAUSES
WHAT TO DO
1) The wine chiller is not
1) No Power Supply
1a) Low voltage
1b) Blown fuse
1) Make sure the wine chiller
cooling.
is plugged into a 3 prong outlet.
1a) Make sure the chiller is plugged
into a proper 120V outlet.
1b) Change fuse. It is recommended
that a qualified electrician change
the fuse on the chiller.
2) The wine chiller is not reaching
2) The chiller is placed too close
2) Keep the chiller away from
the desired temperature.
to a heat source.
sunlight and other heat sources.
2a) Make sure the chiller is
ventilated properly and make sure
that loose debris and other objects
are away from the fan.
2a) Poor ventilation
2b) Make sure the power cable is
properly connected. If the fan needs
to be changed please contact a
qualified technician.
2b) The fan is not working
properly.
2c) The door is opened
2c) Make sure the door is properly
closed tight and do not open the
door frequently.
frequently, or for a long period
of time, or was not properly shut.
2d) The temperature adjuster is
2d) Make sure the temperature
adjuster is properly set. It may need
to be set to a cooler temperature.
set too high.
10
TROUBLE SHOOTING
PROBLEM
POSSIBLE CAUSES
WHAT TO DO
3) The wine chiller temperature is
3) The temperature adjuster
3) Adjust the temperature setting
too cold
is set too low.
to a higher temperature
3a) The ambient temperature is too
3a) Make sure the chiller is in a
location where the ambient
temperature is between 18°C
(65°F) and 29°C (85°F). Do not place
the chiller in too cold of a
location. It increases the risk of
freezing.
low.
4) There is too much frost or
moisture forming in and around
the chiller.
4) There is too much humidity or the
4) Wipe the surface dry. If frost
builds up, unplug the chiller to
defrost. Once defrosted, plug back
in the chiller.
ambient temperature is too low.
5) The wine chiller makes too
5) It is placed on a uneven or
5) Place the wine chiller on a
leveled surface or adjust the legs
accordingly.
much noise.
unleveled surface.
11
CONSUMER SUPPORT
Questions? How to contact:
Telephone:
1-800-579-7990 (Monday – Friday 8:30 AM –
5:30 PM PST)
Email:
Website:
LIMITED 1-YEAR WARRANTY
How do I make a return?
What does this warranty cover?
Return to the retailer from which it was
purchased, along with a copy of the store
receipt within the given period of time allowed
for returns by the retailer (i.e. 90 days). After
this period of time, contact TTI Appliances at
1 (800) 579-7990 for further instructions.
- Any defect in materials or workmanship in the manufactured
product
- Missing parts for a period of 90 days from the date of purchase
What does this warranty not cover?
This warranty excludes any cost of shipping to
and from TTI Appliances.
- Service trips to your home to teach you how to use the
product.
How does state or province law relate to this
warranty?
- Improper installation.
- Failure of the product if it is abused, misused, altered or
used in any manner not in accordance with manufacturer’s
instructions.
-This warranty is extended to the original
purchaser only for products purchased for
household use within the country of purchase.
Some states and provinces do not allow
the exclusion or limitation of incidental or
consequential damages. This warranty
gives you specific legal rights, and you
may also have other rights which vary
from state to state or province to province.
- Products that are used for a commercial purpose.
- Replacement of house fuses or resetting of circuit
breakers.
- Damage to the product caused by accident, fire, floods, power
surges or acts of God.
-Exclusion of implied warranties: Except
where prohibited or restricted by law,
there are no warranties, whether express,
oral or statutory which extend beyond the
description on the face hereof, including
specifically the implied warranties of
merchantability or fitness for a particular
purpose.
- Any service to the product
- Incidental or consequential damage caused by possible
defects with this appliance, its installation or repair.
For how long after the original purchase?
- One (1) year.
Warrantor:
TTI Appliances
11100 Santa Monica Blvd. Suite 560
Los Angeles, CA 90025
Please complete and return warranty registration card.
12
|