Hand-Held digital scale
Model 97227
set up and Operating instructiOns
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
distributed exclusively by Harbor Freight tools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
read this material before using this product.
Failure to do so can result in serious injury.
saVe tHis Manual.
©
®
Copyright 2007 by Harbor Freight Tools . All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
speciFicatiOns
Power Requirements
Maximum Weight
Three 1.5V AAA Batteries (included)
45 Pounds
unpacKing
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
Operating instructiOns
read the entire warning section at the beginning of this manual
including all text under subheadings therein before set up or use of this
product.
1.
2.
3.
4.
5.
Open the Cover on the back on the scale, and paying attention to proper
polarity, install three AAA batteries. Replace the Cover.
Push the ON/OFF button to turn the unit on. If the Scale is not showing a
reading of “0.00” or “0.0”, push the Tare Button to zero it out.
Choose the unit of measure by pushing the Unit Button. Weight can be
displayed in kilograms (kg), pounds (Lb) or ounces (oz).
Hold the Scale by the Top Ring or connect it firmly to a hook or rope, and
suspend the item being weighed from the Hook.
A container can also be suspended from the Hook. Push the Tare button so that
the weight of the container will not be taken into account, before placing the item
to be weighed into the container.
6.
7.
Read the Display to see the weight of the item.
To prevent accidents, turn off the tool and remove the batteries after use. Clean,
then store the tool indoors out of children’s reach.
Maintenance and serVicing
1.
2.
BeFOre eacH use, inspect the general condition of the tool. Check for loose
screws, misalignment or binding of moving parts, cracked or broken parts and
any other condition that may affect its safe operation.
When replacing batteries, dispose of old batteries according to type in a manner
consistent with State, local, and Federal laws and regulations.
3.
.
aFter use, clean external surfaces of the tool with clean, moist cloth.
SKU 97227
For technical questions, please call 1-800-444-3353.
Page 3
parts list
part
1
description
Qty
1
1
Top Ring
Display
2
1
2
3
Tare Button
Unit Button
On/Off Button
Hook
1
4
1
5
1
6
1
3
4
5
6
liMited 90 day warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality
and durability standards, and warrants to the original purchaser that this product is free from
defects in materials and workmanship for the period of 90 days from the date of purchase. This
warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or
accidents, repairs or alterations outside our facilities, criminal activity, improper installation,
normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries
to persons or property, or for incidental, contingent, special or consequential damages arising
from the use of our product. Some states do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation of exclusion may not apply to you. THIS
WARRANTy IS exPReSSLy IN LIeU OF ALL OTHeR WARRANTIeS, exPReSS OR IMPLIeD,
INCLUDINg THe WARRANTIeS OF MeRCHANTABILITy AND FITNeSS.
To take advantage of this warranty, the product or part must be returned to us with
transportation charges prepaid. Proof of purchase date and an explanation of the complaint must
accompany the merchandise. If our inspection verifies the defect, we will either repair or replace
the product at our election or we may elect to refund the purchase price if we cannot readily and
quickly provide you with a replacement. We will return repaired products at our expense, but if we
determine there is no defect, or that the defect resulted from causes not within the scope of our
warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary
from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
Record product’s serial number Here:
note: If product has no serial number, record month and year of purchase instead.
note: Some parts are listed and shown for illustration purposes only, and are not available
individually as replacement parts.
SKU 97227
For technical questions, please call 1-800-444-3353.
Page 4
|