Harbor Freight Tools Riding Toy 38137 User Manual

Item #38137 Steel Flat Rack Wagon  
Assembly and Operating Instructions  
®
3491 Mission Oaks Blvd., Camarillo, CA 93011  
Copyright © 1998 by Harbor Freight Tools®. All rights reserved. No portion of  
this manual or any artwork contained herein may be reproduced in any shape  
or form without the express written consent of Harbor Freight tools.  
For technical questions and replacement parts, please call 1-800-444-3353.  
Thank you for choosing a Harbor Freight Tools product! For future reference, please complete the owner’s  
record befow:  
Model:___________________  
Purchase Date:_________________  
Save the receipt and these instructions. It is important that you read the entire instruction sheet to become  
familiar with this product before you begin using it.  
Technical Specifications:  
Capacity: 1000 lbs.  
Wagon Deck: 4long, 2wide  
Wheels: Steel Hubs with Bearings  
Steering: Steel Handle and Steering Mechanism  
Assembly and Operating Instructions  
Some assembly is required as described below. Refer to the parts diagram and part number listing on the  
reverse side of this page when performing assembly operations.  
1. Turn the Tray (B) upside down so that the exposed screw holes can be seen.  
2. Attach the Rear Bracket (C) to the Tray using two Bolts (M8x38)-for connection of the main axle portion of  
the Rear Bracket, and four Bolts (M6x20)-for connection of the support arms of the Rear Bracket. All bolts  
receive both a Spring Washer, Flat Washer, and Nut.  
3. Attach the Turning Bracket (D) to the Tray using two Bolts (M8x38)-for connection of the main axle portion  
of the Turning Bracket, and two Bolts (M6x20)-for connection of the front portion of the Turning Bracket. The  
rear portion of the Turning Bracket is attached to theTray with 2 Bolts (M6x20). All bolts receive a Spring  
Washer, Flat Washer and a Nut.  
4. Attach the Handle (E) to the Turning Bracket by using Bolt (M6x63), Spring Washer, Flat Washer and Nut.  
5. Install the four Wheels (F) by placing each wheel on the axle portion of the Turning Bracket and the Rear  
Bracket. Secure each Wheel with a Flat Washer (M16) and a Split Pin (M3x30).  
REV 05/05  
Item #38137  
Page 1  
 

Harbor Freight Tools Impact Driver 93100 User Manual
Harman Kardon CD Player HD720 User Manual
Havis Shields Automobile KK K9 C12 K User Manual
Honeywell Automobile Parts ML6275 User Manual
Hotpoint Refrigerator HM 3x AA User Manual
HP Hewlett Packard Computer Drive D2D2502 User Manual
HP Hewlett Packard Personal Computer A6140 User Manual
Husqvarna Lawn Mower 1030 BioClip User Manual
IBM Frozen Dessert Maker VERSION 9 User Manual
IBM Network Card EM78P312N User Manual