Harbor Freight Tools Blower 95159 User Manual

ITEM  
95159  
4-PIECE AIR  
BLOW GUN SET  
SPECIFICATIONS  
Air Blow GunWith Standard Nozzle and  
Two Extensions  
Die-cast Aluminum Frame Body;SteelTrigger Level;  
Threaded Die-Cast ZincTips  
Air Inlet: 1/4” - 18 NPT  
Air Discharge: 3/32” Diameter  
Maximum PSI: 110 PSI  
Overall Dimensions: 4-1/2L X 5-1/2H X 7/8”W  
1. Always wear ANSI-approved safety goggles when working  
with tools and equipment.  
2. Keep out of the reach of children.  
3. Store Air Blow Gun Set in a dry and secure location.  
4. Do not exceed the maximum air pressure of 110 PSI.  
5. Do not modify any part of the Air Blow Gun Set to perform  
any task for which they were not designed.  
6. Never point the Air Blow Gun at peoples or animals.  
7. Save these warnings.  
OPERATING INSTRUCTIONS  
1.Thread the nozzle or the needed extension onto the tip of the  
Air Blow Gun.  
2. Attach the Air Blow Gun to the air source hose. Set the air  
compressor to 30 - 100 working PSI. Do NOT exceed 110 PSI.  
3. Squeeze Air Blow Gun trigger to begin the flow of air.  
4. Release Air Blow Gun trigger to stop the flow of air.  
5. When finished, turn off the air compressor and then  
disconnect Air Blow Gun from the air source hose  
6. Only use clean and dry compressed air. Never use oxygen,  
carbon dioxide, combustible gases or any other bottled gas  
as a power source.  
For technical questions and replacement parts, please call Harbor  
FreightTools at 1-800-444-3353  
 
09/06  
Made in China.  

Grizzly Planer G1017 User Manual
Hamilton Beach Fryer 35200 User Manual
Honeywell GPS Receiver KMD 550 850 User Manual
HP Hewlett Packard All in One Printer TFT7210R User Manual
HP Hewlett Packard Computer Monitor D8907 User Manual
HP Hewlett Packard Fax Machine C6734A User Manual
HP Hewlett Packard Personal Computer 20 b010 User Manual
HP Hewlett Packard Personal Computer 505B User Manual
HP Hewlett Packard Switch EZ KIT User Manual
HTC Cell Phone MyTouch3GBLKTMB User Manual