LCD Display
HT271HPB(HSG1282)
User’s Manual
RECYCLING INFORMATION
We, at HANNspree care very much about our environment protection strategy and firmly believe
that it helps us have healthier earth via appropriate treatment and recycling of industrial technology
devices at the end-of-life.
These devices contain recyclable materials, which can be re-decomposed and re-integrated into
brand-new marvels. On the contrary, other material can be classified to hazardous and poisoned
substances. We strongly encourage you to contact the provided information to recycle this product.
For more information, please visit
3
User’s Manual
TABLE OF CONTENTS
SAFETY NOTICE....................................................................................................5
OPERATING INSTRUCTIONS...........................................................................11
GENERAL INSTRUCTIONS.......................................................................... 11
TECHNICAL SUPPORT (FAQ)...........................................................................18
APPENDIX..............................................................................................................22
4
User’s Manual
SAFETY NOTICE
1. The changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the
emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modification to this equipment. It is the responsibilities of the user to correct such interference.
4. Only use attachments/accesories specified by the manufacturer.
WARNING:
To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously high
voltages are present inside the monitor. Do not open the cabinet. Refer servicing to qualified
personnel only.
PRECAUTIONS
Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub,
swimming pool or in a wet basement.
Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a
person and cause serious damage to the appliance. Use only a cart or stand recommended by the
manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a
mounting kit approved by the manufacturer and follow the kit instructions.
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure
reliable operation of the monitor and to protect it from overheating, be sure these openings are
not blocked or covered. Do not place the monitor on a bed, sofa, rug, or similar surface. Do not
place the monitor near or over a radiator or heat register. Do not place the monitor in a bookcase
or cabinet unless proper ventilation is provided.
The monitor should be operated only from the type of power source indicated on the label. If you
are not sure of the type of power supplied to your home, consult your dealer or local power
company.
Unplug the unit during a lighting storm or when it will not be used for long period of time. This
will protect the monitor from damage due to power surges.
Do not overload power strips and extension cords. Overloading can result in fire or electric
shock.
Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a
fire or electric shock. Never spill liquids on the monitor.
Do not attempt to service the monitor by yourself; opening or removing covers can expose you
to dangerous voltages and other hazards. Please refer all servicing to qualified service personnel.
The wall socket shall be installed near the equipment and shall be easily accessible.
5
User’s Manual
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitor and do not indicate a problem.
Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the
Power Switch and then turn it on again to make sure the flicker disappears.
You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or
less such as a missing pixel or a pixel lit all of the time.
Due to the nature of the LCD screen, an afterimage of the previous screen may remain after
switching the image, when the same image is displayed for hours. In this case, the screen is
recovered slowly by changing the image or turning off the Power Switch for hours.
If the screen suddenly flashes erratically or the backlighting fails, please contact your dealer or
service center for repair. Do not attempt to repair the monitor yourself.
6
User’s Manual
BEFORE YOU OPERATE THE MONITOR
FEATURES
68.6cm / 27” Wide Screen TFT Color LCD Monitor
Crisp, Clear Display for Windows
EPA ENERGY STAR®【Optional, depend on selected model】
GP Green Product
Ergonomic Design
Space Saving, Compact Case Design
CHECKING THE CONTENTS OF THE PACKAGE
The product package should include the following items:
LCD Monitor
Cables and User manual
Warranty Card
Power Cord
Power Adaptor
Quick Start Guide
(optional)
VGA Cable
Audio Cable
USB Cable
7
User’s Manual
POWER
POWER SOURCE:
1. Make sure that the power cord is the correct type required in your area.
2. This LCD monitor has an 12V DC Adapter power supply that allows operation in either
100/120V AC or 220/240V AC voltage area (No user adjustment is required.)
3. Connect the AC-power cord one end to the adapter AC-input socket, the other end to wall-outlet,
then connect the DC-plug to your monitor.
SETTING THE MONITOR ON THE WALL
DISSEMBLING THE STAND :
1. Disconnect all the cables and cords from the Monitor to prevent breakage.
2. Carefully place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to
prevent any damage to the Monitor.
3. Remove the stand cover.
4. Remove the screws so that the stand can be removed.
5. Gently remove the stand.
(For reference only)
1. Purchase a VESA compatible wall bracket:
VESA 100×100, 4 holes, M4, 10mm, 8kg.
2. Locate your ideal Monitor position on the wall.
3. Fix the wall bracket firmly on the wall.
4. Secure the Monitor to the bracket using the 4 mount holes on the back and center of the Monitor.
Note:
Please read the instructions of your specific wall bracket to properly wall mount the Monitor.
The pitch of the mounting holes is 100mm horizontally and 100mm vertically.
The screws type required is metric: M4, 10mm length.
For use only with UL listed wall mount bracket.
*Installing the LCD Monitor requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. Hanns.G bears no responsibility
for improper mounting or mounting that results in accident or injury. You can ask a qualified service
personnel about using an optional bracket to mount the Monitor to the wall.
8
User’s Manual
MAKING CONNECTIONS
CONNECTING TO A PC
Turn off your computer before performing the procedure below.
1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the
computer’s VGA port.
2. Connect one end of the DVI cable to the back of the monitor and connect the other end to the
computer’s DVI port.
3. Connect one end of the HDMI to DVI cable to the back of the monitor and connect the other end
to the computer’s DVI port.
4. Connect one end of the HDMI cable to the back of the monitor and connect the other end to the
computer’s HDMI port.
5. Connect the audio cable between the monitor's audio input and the PC's audio output (green port).
6. Connect one end of the USB cable to the back of the monitor and connect the other end to the
computer’s USB port.
7. Plug one end of the 12V DC adapter to the LCD monitor’s DC 12V input socket, plug one end of
the AC power cord to the 12V DC adapter AC input socket, and the other end of the AC power
cord to Wall outlet.
8. Turn on your monitor and computer.
NOTE:
The HT271H is available with USB connection. It is Microsoft Windows 8 HID (Human Interface
Device) compatible if you use the USB touch screen interference. No additional software driver is
required. Calibration is a simple process and can be invoked by running Tablet PC Settings from
Control Panel and clicking the Calibrate button.
Figure.2. Connecting to a PC
1
3
5
7
Power DC 12V Input
LINE IN
2
4
6
Earphone
VGA Input
HDMI Input
DVI Input
USB-Type A to B
9
User’s Manual
ADJUSTING THE VIEWING ANGLE
For optimal viewing it is recommended to look at the full face of the monitor, then adjust the
monitor’s angle to your own preference.
Hold the stand so you do not topple the monitor when you change the monitor’s angle.
You are able to adjust the monitor’s angle from 10 to 60.
Monitor Angle
Figure.3.
10
User’s Manual
OPERATING INSTRUCTIONS
GENERAL INSTRUCTIONS
Press the power button to turn the monitor on or off. The other control buttons are located on the
front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to
your personal preferences.
The power cord should be connected.
Connect the Signal cable from the monitor to the VGA card.
Press the power button to turn on the monitor. The power indicator will light up.
Menu / Return
▼ ◀[－]
Volume adjustment button
▲ ▶ [＋]
Brightness adjustment button
Input source change/ Enter
Auto adjustment
Power Button
Figure.4. Control Panel Buttons
11
User’s Manual
FRONT PANEL CONTROL
Power Button:
Press this button to switch ON/OFF of monitor’s power.
Power Indicator:
Blue — Power On mode.
Blue flicker — Power Saving mode.
MENU / RETURN:
Turn the OSD menu on/off or return to the previous menu.
Adjust ▲▼:
1. Adjust Brightness and volume when the OSD is off.
2. Navigate through adjustment icons when OSD is ON or adjust a function when function is
activated.
AUTO Button: 《Analog Input Models》
The 「Auto adjustment」 function works only for VGA input. (The auto adjustment function is
used to optimize the 「horizontal position」, 「vertical position」,「clock」,and 「phase」.)
【
】Button: 《Digital Input Models》
1. Press【
】to enter Source selections. (Selections include DVI, HDMI, etc. The actual
selections may very depending on the models. This function is only available in models with
digital inputs)
2. The OSD menu is used as《confirmation》function during start-up.
Hotkeys:
1. Restore Brightness and Contrast defaults:
To reset both the Brightness and Contrast to their default values, press the【▲】and【▼】keys
at the same time.
2. ASPECT RATIO:
Press【MENU】+【▼】key to change to 「FULL MODE」 or 「FIT MODE」.
3. Change Resolution:
For similar screen display resolutions (see table below), the screen resolution can be changed by
pressing the【MENU】+【▲】button to achieve the optimal display quality.
4. Change Preset Mode: [The availability of this function depends upon the selected model]
Press【MENU】key for 3 seconds to select one of the following modes「PC」,「MOVIE」,
「GAME」,「ECO」. Default is「PC」.
12
User’s Manual
Resolution
640×400@70Hz ↔ 720×400@70Hz
640×480@60Hz ↔ 720×480@60Hz
1024×768@70Hz ↔ 1280×768@70Hz
1280×768@60Hz ↔ 1360×768@60Hz
1400×1050@60Hz ↔ 1680×1050@60Hz
1400×1050@RB 60Hz ↔ 1680×1050@RB 60Hz
1400×1050@75Hz ↔ 1680×1050@75Hz
1440×900@60Hz ↔ 1600×900@60Hz
1360×768@60Hz ↔ 1366×768@60Hz
1280×960@60Hz ↔ 1600×900@60Hz
** The screen resolutions available will depend on the purchased model.
NOTES:
Do not install the monitor in a location near heat sources such as radiators or air dusts, or in a
place subject to direct sunlight, or excessive dust or mechanical vibration or shock.
Save the original shipping box and packing materials, as they will come in handy if you ever have
to ship your monitor.
For maximum protection, repackage your monitor as it was originally packed at the factory.
To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be
removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents
such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.
13
User’s Manual
HOW TO ADJUST A SETTINGS
BRIGHTNESS/ CONTRAST
Adjust the brightness value of the display according to your
preference. Select「BRIGHTNESS」option to adjust the
brightness value.
BRIGHTNESS
CONTRAST
Adjust the contrast value of the display according to your
preference. Select「CONTRAST」option to adjust the contrast
value.
Optimal setting for high contrast images or videos. The dark and
light areas of the image are automatically detected, and the
contrast is enhanced to provide a clearer, sharper image. Also,
you may select the「ACTIVE CONTRAST」option.
ACTIVE CONTRAST
Select the preset mode according to your preference: PC/
MOVIE/ GAME/ ECO
[The availability of this function depends upon the selected
model]
PRESET MODE
INPUT SETTING
INPUT SETTING
Select the「INPUT SETTING」option to change between analog
(VGA) or Digital (DVI) source. Enter the option and select
Analog or Digital. [Dual input mode optional]
From the Signal Selection menu, select the 「AUTO SEARCH」
option to activate or deactivate the automatic signal search
function. [For DVI/ HDMI Input only]
AUTO SEARCH
COLOR SETTING
WARM
NATURE (6500K)
COOL
Adjust the color temperature value of the display according to
your preference: WARM /NATURE/ COOL.
Move the cursor to the User option and select it,
1. To adjust the red, enter the「R」option and adjust the level.
2. To adjust the green, enter the「G」option and adjust the level.
3. To adjust the blue, enter the「B」option and adjust the level.
USER
IMAGE SETTING
AUTO ADJUST
The auto adjustment function is used to optimize the
「H-POSITION」,「V-POSITION」,「CLOCK」,and「PHASE」.
[For VGA Input only]
When the aspect ratio of screen is distorted, you may make
adjustments by using this function.「FULL」indicates full screen
ASPECT RATIO
14
User’s Manual
display, which does not ensure the image is shown as is or in
initial scale.「FIT」indicates scaling by the proportion of original
images, which may cause the screen showing black bands. [The
availability of this function depends upon the selected model]
Select the「H-POSITION」option to shift the screen image to the
left or right. Enter the option and adjust the level. [For VGA
only]
H-POSITION
V-POSITION
Select the 「V-POSITION」option to shift the screen image up or
down. Enter the option and adjust the level. [For VGA only]
Select the 「CLOCK」option to reduce the vertical flicker of
characters on the screen. Enter the option and adjust the level.
[For VGA only]
CLOCK
Select the「PHASE」option to reduce the horizontal flicker of
characters on the screen. Enter the option and adjust the level.
[For VGA only]
PHASE
Select the「SHARPNESS」option to adjust the sharpness of the
display. Set the value from -2 to 2.
SHARPNESS
Choose「VIDEO MODE」or 「PC MODE」for video
transmission. While using HDMI or HDMI to DVI ports for
video transmission, the video will appear cut off slightly around
the edge; choose「PC MODE」to view videos with complete
image. (VIDEO MODE only functions for inputs from HDMI or
DVI that supports HDCP video (YUV format))
VIDEO MODE
OSD SETTING
LANGUAGE
Select 「LANGUAGE」 option to change the language of the
OSD. Enter the option and select a language. [Reference only,
the OSD Language depends on the selected model]
Select「H-POSITION」option to adjust the horizontal position of
the OSD. Enter the option and adjust the level.
H-POSITION
Select 「V-POSITION」option to adjust the vertical position of
the OSD. Enter the option and adjust the level.
V-POSITION
Select「TRANSPARENCY」option to adjust the transparency of
the OSD. Enter the option and adjust the level.
TRANSPARENCY
OSD TIME-OUT
Select 「OSD TIME-OUT」option to set the OSD time out from
10 to 100 seconds. Enter the option and adjust the level.
15
User’s Manual
To choose the color combination of the OSD window, select
「OSD COLOR」option under 「OSD SETTING」menu, choose
modes 1/2/3.
OSD COLOR
SYSTEM
While transferring via the HDMI port, it is recommended to set
AUDIO INPUT to HDMI; if no sound is outputted, it is
recommended to select AUDIO INPUT as PC, and make sure the
PC audio output cable is connected to monitor’s LINE IN (or
AUDIO IN) port. [For HDMI Input only]
AUDIO INPUT
VOLUME
Select the「VOLUME」option to change the volume level. Enter
the option and adjust the level. [This function applies only to
models with incorporated audio.]
● By high volume, risk of hearing damage exists.
Select the「MUTE」option to switch the function On or Off. [The
availability of this function depends upon the selected model.
Adjusting the volume while muted cancels Mute mode.]
MUTE
Select the 「DDC/CI」option to switch the function On or Off.
[Dual input mode optional]
DDC/CI
Select the 「FACTORY RESET」option to reset to the monitor’s
FACTORY RESET
INFORMATION
default setting. This will erase the current settings. Enter the
option and select On or Off.
Display Horizontal frequency/Vertical frequency/Resolution
information.
16
User’s Manual
PLUG AND PLAY
Plug & Play DDC2B Feature
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD.
It allows the monitor to inform the host system of its identity and, depending on the level of DDC
used, communicate additional information about its display capabilities. The DDC2B is a
bidirectional data channel based on the I²C protocol. The host can request EDID information over the
DDC2B channel.
THIS MONITOR WILLAPPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO
INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE
MUST BE A VIDEO INPUT SIGNAL.
17
User’s Manual
TECHNICAL SUPPORT (FAQ)
Q & A FOR GENERAL PROBLEMS
PROBLEM & QUESTION
Power LED is not on
POSSIBLE SOLUTION
*Check if the Power Switch is in the ON position.
*Power Cord should be connected.
*Check if the PC system is Plug & Play compatible.
*Check if the Video Card is Plug & Play compatible.
*Check if any plug pins on the VGA or DVI
connector are bent.
No Plug & Play
The display is too dark or too bright.
*Adjust the Contrast and Brightness Controls.
Picture bounces or a wave pattern is
present in the picture
*Move electrical devices that may cause electrical
interference.
*Computer Power Switch should be in the ON
position.
*Computer Video Card should be snugly seated in its
slot.
*Make sure monitor’s video cable is properly
connected to the computer.
*Inspect monitor’s video cable and make sure none
of the pins are bent.
The power LED is ON (flickering) but
there’s no video or no picture.
*Make sure computer is operational by hitting the
CAPS LOCK key on the keyboard while observing
the CAPS LOCK LED. The LED should either turn
ON or OFF after hitting the CAPS LOCK key.
Missing one of the primary colors (RED,
GREEN, or BLUE)
*Inspect the monitor’s video cable and make sure that
none of the pins are bent.
Screen image is not centered or sized
properly.
* Adjust pixel frequency CLOCK and PHASE or
press hot-key ( AUTO Button).
Picture has color defects
(White does not look white)
*Adjust RGB color or select color temperature.
*Use win 2000/ME/XP Right click anywhere on
desktop and select Properties>Settings>Screen
Resolution. Use the slider to adjust the resolution
and click Apply.
The screen resolution needs to be adjusted
No sound is outputted from monitor’s
built-in speaker
*Make sure PC audio output cable is connected to
screen’s LINE IN port (or AUDIO IN port).
*Make sure the sound volume adjustment can be
clearly identified.
*Make sure the System > Silence option in the
monitor menu is on.
*While transferring via HDMI port but no sound is
outputted, it is recommended to select AUDIO
18
User’s Manual
INPUT as a PC option, and make sure PC audio
output cable is connected to monitor’s LINE IN
port(or AUDIO IN port). [For HDMI Input only]
Addendum related to Windows 7 / Windows 8
When you encounter display problem under Windows 7 / Windows 8, you need to do the following:
1. Make sure your PC computer (Hardware requirement) can support Windows 7 / Windows 8.
2. Make sure your video card can run Windows 7 / Windows 8.
3. If your video card can support Windows 7 / Windows 8, need to install the latest Windows 7 /
Windows 8 driver of your video card.
Suggest to do the following:
1. Install the latest Windows 7 / Windows 8 video driver of your video card.
2. Try to use the recommended display resolution that is supported by the monitor.
3. If the recommended display resolution is not working, try the second recommended display
resolution.
1
2
35,56cm / 14” (16:9)
39,6cm / 15.6” (16:9)
40,64cm / 16” (16:9)
43,2cm / 17” (16:10)
47cm / 18.5” (16:9)
48,3cm / 19” (5:4)
48,3cm / 19” (16:10)
51cm / 20” (16:9)
56cm / 22” (16:10)
54,6cm / 21.5” (16:9)
58,4cm / 23” (16:9)
60cm / 23.6” (16:9)
62,5cm / 24.6 (16:9)
68.6cm / 27” (16:9)
70cm / 27.5” (16:10)
1366×768@60Hz
1366×768@60Hz
1366×768@60Hz
1440×900@60Hz
1366×768@60Hz
1280×1024@60Hz
1440×900@60Hz
1600×900@60Hz
1680×1050@60Hz
1366×768@50Hz
1366×768@75Hz
1366×768@50Hz
1440×900@75Hz
1366×768@75Hz
1280×1024@75Hz
1440×900@75Hz
1600×900@50Hz
1680×1050@50Hz
1920×1080@60Hz
1920×1080@50Hz
1920×1200@60Hz
1920×1200@50Hz
And if you still have display problem after doing the above procedure, please visit Hanns.G
Windows is a registered trademark of Microsoft Corporation.
19
User’s Manual
ERROR MESSAGE & POSSIBLE SOLUTIONS
.
CABLE NOT CONNECTED:
1. Check that the signal-cable is properly connected, if the connector is loose, tighten the
connector’s screws.
2. Check the signal-cable’s connection pins for damage.
.
INPUT NOT SUPPORT :
Your computer has been set to unsuitable display mode, set the computer to display mode given
in the following table.
FACTORY PRESET TIMING TABLE:
HORIZONTAL
FREQUENCY (KHz)
VERTICAL
FREQUENCY (Hz)
MODE
RESOLUTION
1
640×400 @70Hz
640×480 @60Hz
640×480 @70Hz
640×480 @67Hz
640×480 @72Hz
640×480 @75Hz
720×400 @70Hz
800×600 @56Hz
800×600 @60Hz
800×600 @72Hz
800×600 @75Hz
832×624 @75Hz
1024×768 @60Hz
1024×768 @70Hz
1024×768 @75Hz
1152×870 @75Hz
1152×864 @75Hz
1280×720 @60Hz
1280×960 @60Hz
1280×960 @75Hz
1280×768 @60Hz
1280×768 @75Hz
1280×1024 @60Hz
1280×1024 @75Hz
1360×768 @60Hz
1440×900 @60Hz
1440×900 @75Hz
31.469
31.469
36.052
35.000
37.861
37.500
31.469
35.156
37.879
48.077
46.875
49.725
48.363
56.476
60.023
68.681
67.500
45.000
60.000
74.592
47.776
60.289
63.981
79.976
47.712
55.469
70.635
70.087
59.940
70.004
66.667
72.809
75.000
70.087
56.250
60.317
72.188
75.000
75.000
60.004
70.069
75.029
75.062
75.000
60.000
60.000
74.443
59.870
74.893
60.020
75.025
60.015
59.901
74.984
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
20
User’s Manual
28
29
30
1400×1050 @60Hz
1680×1050 @60Hz
1920×1080 @60Hz
64.744
65.290
67.500
59.948
59.954
60.000
(Video mode)
MODE
RESOLUTION
640×480p @60Hz
720×480i @60Hz
720×480p @60Hz
720×576i @50Hz
720×576p @50Hz
1280×720p @60Hz
1920×1080i @50Hz
1920×1080i @60Hz
1920×1080p @50Hz
1920×1080p @60Hz
1
2
3
4
5
6
7
8
9
10
** We ensure that the monitor can be lighted under interlace signal mode, but we can not guarantee
the image quality.
21
User’s Manual
APPENDIX
SPECIFICATIONS
Driving system
Size
TFT Color LCD
LCD Panel
68.6cm / 27” Diagonal
0,3114mm(H) × 0,3114mm(V)
31KHz – 80KHz
56Hz – 75Hz
Pixel pitch
H-Frequency
V-Frequency
Video
Display Colors
Max. Resolution
Plug & Play
16.7M Colors
1920 × 1080 @60Hz
VESA DDC2BTM
35W (Typical)
ON Mode
Power consumption
Power Saving Mode
OFF Mode
≤0.5W
≤0.5W
Audio output
Rated Power 1.5 W rms (Per channel)
VGA
Input Terminal
DVI (optional)
HDMI (optional)
Hor. : 597.9mm
Ver. : 336.3mm
Maximum Screen Size
Power Source
100–240V ～1.0A 50/60Hz
Operating Temp:5° to 35°C
Storage Temp.: -20° to 60°C
Operating Humidity: 10% to 85%
Environmental
Considerations
653.9 (W)×465.6(H)×82.8(D) mm
25.7 ”(W)×18.3 ”(H)×3.2 ”(D)
Dimensions
Weight (NW)
15.3kg (33.7lb)
Projected Capacitive
USB
Touchscreen Technology
Touchscreen Interface
Touch Method
Finger(s) input
Microsoft Windows®8
Supported O/S
*** The above specification is subject to actual product specification and is subject to change
without prior notice.
NOTES:
The Maximum Resolution will depends on the display card supporting. Related issue can refer to
22
|