TM
Clean Cut Can Opener
English..............................2
USA: 1-800-851-8900
Canada : 1-800-267-2826
840091200
Using Your Can Opener
Know Your Can Opener
To open cans:
1. Cutting Assembly
1. Place can opener on level surface.
2. Plug cord into electrical outlet.
3. Raise piercing lever up.
4. Place rim of can firmly under can
guide pin and against the geared
wheel.
Release Button
2. Piercing Lever
3. Magnetic Lid Holder
4. Can Guide Pin
5. Geared Wheel
5. Press piercing lever all the way
6. Bottle Opener
7. Knife Sharpener
8. Cord Storage and Lock Slot
down.
6. The motor will begin turning can
and cutting lid. (It is not necessary to hold the piercing
lever down or to hold the can during the cutting action.)
7. The motor will automatically stop when the can is open.
8. Remove can from can opener and check can contents to
remove any pieces of label or metal shavings.
To sharpen knives:
1. Place cutting edge of knife in the
knife slot located on the back of
the can opener.
2. Draw the knife blade through the
slot several times.
3. Clean knife after sharpening.
NOTE: Serrated blades should never
be inserted into this unit.
To open bottles:
Hold top of can opener to stabilize the unit. Open bottles
slowly to avoid spilling contents.
4
5
Hints for Best Use
Cleaning Your Can Opener
• The can opener will easily open all standard size cans.
1. Unplug cord from electrical outlet.
Remove
• If there is a bump, dent, or heavy seam in the rim of the
can, open the other end of the can or start cutter just
beyond the problem area.
• The motor of your can opener is permanently lubricated
and will require no oiling.
• To use the cord storage on the back of the opener, push in
or pull out the cord as needed.
• To lock the cord, turn cord sideways and slide up into cord
lock slot.
2. To remove the cutting head
assembly, press release button.
3. Wash cutting head assembly in
hot soapy water. Rinse and dry
thoroughly. Can also be placed in
top rack of dishwasher.
4. Wipe the can opener body and
the area behind the cutting head
assembly with a damp cloth.
Never immerse the can opener in
water.
Re-assemble
• If piercing lever does not move freely, remove and clean the
cutting head assembly.
5. To re-assemble, raise lever slightly
then slide the assembly onto the
body until the release button clicks
into place.
Customer Service
If you have a question about your can opener, call our
toll-free customer service number. Before calling, please
note the model, type, and series numbers and fill in that
information below. These numbers can be found on the
bottom of your can opener. This information will help us
answer your question much more quickly.
MODEL:_____________ TYPE:_____________ SERIES: ______________
6
7
LIMITED WARRANTY
This product is warranted to be free from defects in material and workmanship for a
period of two (2) years for Hamilton Beach Portfolio products or one (1) year for
Hamilton Beach products from the date of original purchase, except as noted below.
During this period, we will repair or replace this product, at our option, at no cost. THE
FOREGOING WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, WHETHER
EXPRESS OR IMPLIED, WRITTEN OR ORAL INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ANY LIABILITY IS
EXPRESSLY LIMITED TO AN AMOUNT EQUAL TO THE PURCHASE PRICE PAID, AND
ALL CLAIMS FOR SPECIAL, INCIDENTAL AND CONSEQUENTIAL DAMAGES ARE
HEREBY EXCLUDED. There is no warranty with respect to the following, which may be
supplied with this product: glass parts, glass containers, cutter/strainer, blades, and/or
agitators. This warranty extends only to the original consumer purchaser and does not
cover a defect resulting from abuse, misuse, neglect, use for commercial purposes, or
any use not in conformity with the printed directions. This warranty gives you specific
legal rights, and you may also have other legal rights which vary from state to state, or
province to province. Some states or provinces do not allow limitations on implied
warranties or special, incidental or consequential damages, so the foregoing limitations
may not apply to you.
If you have a claim under this warranty, DO NOT RETURN THE APPLIANCE TO THE
STORE! Please call our CUSTOMER SERVICE NUMBER. (For faster service please
have model, series, and type numbers ready for operator to assist you.)
CUSTOMER SERVICE NUMBERS
In the U.S. 1-800-851-8900
In Canada 1-800-267-2826
KEEP THESE NUMBERS FOR FUTURE REFERENCE!
HAMILTON BEACH PROCTOR-SILEX,INC.
263 Yadkin Road
PROCTOR-SILEX CANADA,INC.
Picton, Ontario K0K 2T0
Southern Pines, NC 28387
840091200
12/01
8
|