QuickSpecs
Overview
HP SAS Hard Drives
Serial Attached SCSI (SAS) provides a superior storage solution. With some storage requirements escalating and others becoming more
complex, factors such as flexibility, performance, increased reliability, greater density, security, scalability and accessibility are more
critical than ever. Today's organizations consist of different kinds of environments. Enterprise data centers must be online 24X7, fulfill
requests from numerous users simultaneously, and allow for constant growth and expansion while in operation. Other customer
environments require high capacity storage and high data availability for low I/O environments. HP's portfolio of SAS drives meets all
these demands.
What's New
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
Models
HP SAS Hot Plug SmartDrive Carriers for Gen8 Servers only
SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC Dual Port Enterprise 3yr Warranty Hard Drive
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
718162-B21
652589-B21
652583-B21
652572-B21
652564-B21
652611-B21
652605-B21
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
652749-B21
Page 1
DA - 12244 Worldwide — Version 44 — December 9, 2013
QuickSpecs
Overview
HP SAS Hard Drives
HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Quick-release Dual Port Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 15K rpm LFF (3.5-inch) Quick-release Dual Port Enterprise 3yr Warranty Hard Drive
SAS Quick Release LFF (3.5-inch) Midline (MDL) Drives
574758-B21
585980-B21
HP 4TB 6G SAS 7.2k rpm LFF (3.5-inch) Quick-release Midline 1yr Warranty Hard Drive
HP 2TB 6G SAS 7.2K rpm LFF (3.5-inch) Quick-release Dual Port Midline 1yr Warranty Hard Drive
NOTE: Refer to the appropriate server QuickSpecs for full compatibility details
697956-B21
574761-B21
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 3
QuickSpecs
Standard Features
HP SAS Hard Drives
What is SAS?
Serial Attached SCSI (SAS) is the evolution of the SCSI interface. SAS Enterprise drives satisfy the
enterprise data center requirement of scalability, performance, reliability and manageability, while
providing an enterprise storage infrastructure for both enterprise SAS drives and SATA disk drives. SAS
Midline drives provide the lowest dollars per gigabyte and economical reliability and performance. The SAS
interface is compatible with SATA devices. This compatibility provides users with unprecedented choices
for server and storage subsystem deployment
Drive Quality and
Performance
Today's distributed enterprise is seeing larger, more complex applications, an increase of mission-critical
data moving to the server, increasing demand for transaction processing and critical server consolidation.
In this environment, storage has become a critical component of the information system, significantly
defining both the systems reliability and performance. This is why HP drives undergo an intense
qualification process that eliminates firmware and O/S incompatibilities. All drive firmware is specific to
our drives and is designed to maximize both functionality and compatibility. All drives are proven to
perform in the HP systems for which they were designed.
While selecting the drives in our Enterprise portfolio, only those drives whose performance is suitable for
an enterprise environment are selected through the HP qualification process and are labeled "best-in-
class." All our Enterprise drives are proven to be reliable and tuned for optimum performance in the HP
equipment for which they were designed. The drives in our Midline portfolio undergo a similar qualification
process to ensure that you get the economical reliability and performance you need for your low workload
(less than 40% I/O) environments.
Performance
Only those drives whose performance is suitable for an enterprise environment are selected through the
HP qualification process and are labeled "best-in-class." All our drives are proven to be reliable and tuned
for optimum performance in the HP equipment for which they were designed.
Pre-Failure Alert
When used in conjunction with a SMART Array Controller and Systems Insight Manager, the SMART capable
firmware in HP hard drives enables extensive fault prediction capabilities. If potential problems develop in
one of the drives, the Smart Array Controller, Systems Insight Manager and/or SMART hard disk drive lets
you know in advance so you can have the drive replaced, before it fails, under warranty.
NOTE: All drives are protected by a Pre-Failure Alert when used with a HP Smart Array controller and
Systems Insight Manager, allowing hard drives to be replaced before failure under warranty. In addition,
all drives are covered by a one or three-year limited on-site warranty period for the system in which they
are installed. The drive warranty is automatically uplifted when used in a server or MSA for which a Care
Pack is purchased. Please see the Support Services section below for additional services.
Integration
Many issues customers have with third party drives are "simple" integration issues. When buying from
another supplier, there is no guarantee that a drive has been correctly set for proper operation with
ProLiant servers and storage systems. These incompatibilities can create problems in configuration, can
rob your system of performance, or at their worst, can cause you to lose data. HP hard drives are
specifically designed and tested for flawless operation in your HP equipment. The integration of hard
drives in HP systems means that cables, SCSI ID settings, termination, hot plug drive trays and firmware
are right for your ProLiant server or storage system.
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 4
QuickSpecs
Standard Features
HP SAS Hard Drives
Support Matrix
Please see the following URL for the latest list of supported servers and enclosures:
Warranty
SAS Enterprise hard drives have a 3 year limited warranty regardless of the warranty period for the system
in which they are installed.
SAS Midline hard drives have a 1 year limited warranty regardless of the warranty period for the system in
which they are installed.
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 5
QuickSpecs
Service and Support
HP SAS Hard Drives
Service and Support
HP Technology Services
HP Technology Services offers you consultants and support experts to solve your most complex
infrastructure problems. We help keep your business running, boost availability and avoid downtime.
Protect your business beyond warranty with HP Care Pack Services
When you buy HP Options, it's also a good time to think about what level of service you may need. HP Care
Pack services provide total care and support expertise with committed response choices designed to meet
your IT and business need.
Recommended HP Care Pack Services for optimal satisfaction with your HP product
Recommended Services 3-Year HP 24x7 4 hour Response, Hardware Support Onsite Service
Provides you with rapid remote support and if required an HP authorized representative who will arrive on
site any time and day of the year to begin hardware maintenance service within 4 hours of the service
request being logged.
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and networking
options to assist you in bringing your new hardware into operation in a timely and professional manner
Related HP Care Pack Services to enhance your HP product experience
Related Services
3-Year HP 6 hour Hardware Support Onsite Call-to-Repair Service
Provides an IT manager with a team of support specialists who will quickly begin troubleshooting the
system to help return the hardware to operating condition within 6 hours of the initial service request to
the HP Global Solution Center
HP Proactive Select Service
Provides a flexible way to purchase HP best-in-class consultancy and technical services. You can buy
Proactive Select Service Credits when you purchase your hardware and then use the credits over the next
12 months.
Insight Remote Support Delivers secure remote monitoring and support for HP servers and storage, 24x7 at no additional cost.
Available as part of HP Warranty, Care Pack and Service Contract offers.
Parts and materials
HP will provide HP-supported replacement parts and materials necessary to maintain the covered
hardware product in operating condition, including parts and materials for available and recommended
engineering improvements. Supplies and consumable parts will not be provided as part of this service;
standard warranty terms and conditions apply. Parts and components that have exceeded their maximum
supported lifetime and/or the maximum usage limitations as set forth in the manufacturer's operating
manual or the technical product data sheet will not be provided, repaired or replaced as part of this
service.
Coverage
For ProLiant servers and storage systems, this service covers HP-branded hardware options qualified for
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 6
QuickSpecs
Service and Support
HP SAS Hard Drives
the server, purchased at the same time or afterward, internal to the enclosure, as well as external
monitors up to 22" and tower UPS products; these items will be covered at the same service level and for
the same coverage period as the server unless the maximum supported lifetime and/or the maximum
usage limitation has been exceeded. Coverage of the UPS battery is not included; standard warranty terms
and conditions apply.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by HP due to malfunction. It does not apply to any exchange of Disk or SSD/Flash Drives that
have not failed. SSD/Flash Drives that are specified by HP as consumable parts and/or that have exceeded
maximum supported lifetime and/or the maximum usage limit as set forth in the manufacturer's operating
manual or the technical data sheet are not eligible for the defective media retention service feature option.
For more information
To learn more on services for HP ESSN Options, please contact your HP sales representative or HP
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 7
QuickSpecs
Technical Specifications
HP SAS Hard Drives
SAS Hot Plug SmartDrive SFF (2.5-inch) Enterprise Drives
Application
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
load intensive applications where 24/7 duty cycles are a requirement, such as database applications and
high transaction level applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
HP 1.2TB 6G SAS 10K rpm
SFF (2.5-inch) SC Dual Port
Enterprise 3yr Warranty
Hard Drive
718162-B21
Capacity
Height
Width
1,200,243MB
0.62 in (15.6 mm)
2.98 in (75.7 mm)
4.67 in (118.7 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.3 ms
4.6 ms
Full-Stroke
8.9 ms
Rotational Speed
Bytes/Sector
Logical Blocks
10,000 rpm
512
Physical Configuration
2,344,225,968
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
HP 900GB 6G SAS 10K rpm
SFF (2.5-inch) SC
Enterprise 3yr Warranty
Hard Drive
652589-B21
Capacity
Height
Width
900,185MB
0.62 in (15.6 mm)
2.98 in (75.7 mm)
4.67 in (118.7 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.21 ms
3.8 ms
Full-Stroke
7.4 ms
Rotational Speed
Bytes/Sector
Logical Blocks
10,000 rpm
512
Physical Configuration
1,758,174,768
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 8
QuickSpecs
Technical Specifications
HP SAS Hard Drives
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
HP 600GB 6G SAS 10K rpm
SFF (2.5-inch) SC
Enterprise 3yr Warranty
Hard Drive
652583-B21
Capacity
Height
Width
600,127MB
0.62 in (15.6 mm)
2.98 in (75.7 mm)
4.67 in (118.7 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.3 ms
4.0 ms
Full-Stroke
8.0 ms
Rotational Speed
Bytes/Sector
Logical Blocks
10,000 rpm
512
Physical Configuration
1,172,123,568
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
HP 1.2TB 6G SAS 10K rpm
SFF (2.5-inch) Quick
Release Dual Port ENT 3yr
Warranty Hard Drive
718164-B21
Capacity
Height
Width
1,200,243MB
0.740 in (18.8 mm)
2.909 in (73.9 mm)
3.945 in (100.2 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.3ms
4.6ms
Full-Stroke
8.9ms
Rotational Speed
Bytes/Sector
Logical Blocks
10,000rpm
512
Physical Configuration
2,344,225,968
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 9
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 450GB 6G SAS 10K rpm
SFF (2.5-inch) SC
Enterprise 3yr Warranty
Hard Drive
652572-B21
Capacity
Height
Width
450,098MB
0.62 in (15.6 mm)
2.98 in (75.7 mm)
4.67 in (118.7 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.3 ms
4.0 ms
Full-Stroke
8.0 ms
Rotational Speed
Bytes/Sector
Logical Blocks
10,000 rpm
512
Physical Configuration
879,097,968
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
HP 300GB 6G SAS 10K rpm
SFF (2.5-inch) SC
Enterprise 3yr Warranty
Hard Drive
652564-B21
Capacity
Height
Width
300,000MB
0.62 in (15.6 mm)
2.98 in (75.7 mm)
4.67 in (118.7 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.3 ms
4.0 ms
Full-Stroke
8.0 ms
Rotational Speed
Bytes/Sector
Logical Blocks
10,000 rpm
512
Physical Configuration
585,937,500
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 10
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 300GB 6G SAS 15K rpm
SFF (2.5-inch) SC
Enterprise 3yr Warranty
Hard Drive
652611-B21
Capacity
Height
Width
300,000MB
0.62 in (15.6 mm)
2.98 in (75.7 mm)
4.67 in (118.7 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.4 ms
2.9 ms
Full-Stroke
5.3 ms
Rotational Speed
Bytes/Sector
Logical Blocks
15,000 rpm
512
Physical Configuration
585,937,500
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
HP 146GB 6G SAS 15K rpm
SFF (2.5-inch) SC
Enterprise 3yr Warranty
Hard Drive
652605-B21
Capacity
Height
Width
146,815MB
0.62 in (15.6 mm)
2.98 in (75.7 mm)
4.67 in (118.7 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.4 ms
3.0 ms
Full-Stroke
7.0 ms
Rotational Speed
Bytes/Sector
Logical Blocks
15,000 rpm
512
Physical Configuration
286,749,488
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 11
QuickSpecs
Technical Specifications
HP SAS Hard Drives
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
Application
SAS Midline drives are intended for servers and storage solutions where high capacities are required.
These drives have moderately-priced reliability and performance for non-mission critical, low workload
applications, such as disk backup, archival, and reference applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
HP 1TB 6G SAS 7.2K rpm
SFF (2.5-inch) SC Midline
1yr Warranty Hard Drive
652749-B21
Capacity
Height
Width
1,000,204MB
0.62 in (15.6 mm)
2.98 in (75.7 mm)
4.67 in (118.7 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.7 ms
8.7 ms
Full-Stroke
17.16 ms
7200 rpm
512
Rotational Speed
Bytes/Sector
Logical Blocks
Physical Configuration
1,953,525,168
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
HP 500GB 6G SAS 7.2K rpm
SFF (2.5-inch) SC Midline
1yr Warranty Hard Drive
652745-B21
Capacity
Height
Width
500,107MB
0.62 in (15.6 mm)
2.98 in (75.7 mm)
4.67 in (118.7 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.7 ms
8.7 ms
Full-Stroke
17.16 ms
7200 rpm
512
Rotational Speed
Bytes/Sector
Logical Blocks
Physical Configuration
976,773,168
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 12
QuickSpecs
Technical Specifications
HP SAS Hard Drives
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
SAS Hot Plug SmartDrive LFF (3.5-inch) Enterprise Drives
Application
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
load intensive applications where 24/7 duty cycles are a requirement, such as database applications and
high transaction level applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
HP 600GB 6G SAS 15K rpm
LFF (3.5-inch) SC
Enterprise 3yr Warranty
Hard Drive
652620-B21
Capacity
Height
Width
600,127MB
1.06 in (26.8 mm)
4.16 in (105.8 mm)
6.69 in (170.0 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.2 ms
3.5 ms
Full-Stroke
6.8 ms
Rotational Speed
Bytes/Sector
Logical Blocks
15000 rpm
512
Physical Configuration
1,172,123,568
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 13
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 450GB 6G SAS 15K rpm
LFF (3.5-inch) SC
Enterprise 3yr Warranty
Hard Drive
652615-B21
Capacity
Height
Width
450,098MB
1.06 in (26.8 mm)
4.16 in (105.8 mm)
6.69 in (170.0 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.2 ms
3.5 ms
Full-Stroke
6.8 ms
Rotational Speed
Bytes/Sector
Logical Blocks
15000 rpm
512
Physical Configuration
879,097,968
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
SAS Hot Plug SmartDrive LFF (3.5-inch) Midline Drives
Application
SAS Midline drives are intended for servers and storage solutions where high capacities are required.
These drives have moderately-priced reliability and performance for non-mission critical, low workload
applications, such as disk backup, archival, and reference applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
HP 4TB 6G SAS 7.2K rpm
LFF (3.5-inch) SC Midline
1yr Warranty Hard Drive
695510-B21
Capacity
Height
Width
4,000,787MB
1.06 in (26.8 mm)
4.16 in (105.8 mm)
6.69 in (170.0 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.7 ms
8.5 ms
Full-Stroke
15.7 ms
7200 rpm
512
Rotational Speed
Bytes/Sector
Logical Blocks
Physical Configuration
7,814,037,168
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 14
QuickSpecs
Technical Specifications
HP SAS Hard Drives
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
NOTE: To support HP hard drives exceeding 2.2 TB, HP Smart Array Firmware
version 5.0 or later is required for the following controllers:
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P411 Controller
HP Smart Array P711m Controller
HP Smart Array P812 Controller
To use hard drives exceeding 2.2 TB, you must create a boot volume using
offline ACU version 8.75 or later. HP Smart Array controllers do not support
boot volumes exceeding 2.2 TB. Other controllers are not supported
HP 3TB 6G SAS 7.2K rpm
LFF (3.5-inch) SC Midline
1yr Warranty Hard Drive
652766-B21
Capacity
Height
Width
3,000,592MB
1.06 in (26.8 mm)
4.16 in (105.8 mm)
6.69 in (170.0 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.7 ms
8.3 ms
Full-Stroke
15.7 ms
7200 rpm
512
Rotational Speed
Bytes/Sector
Logical Blocks
Physical Configuration
5,860,533,168
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
NOTE: To support HP hard drives exceeding 2.2 TB, HP Smart Array Firmware
version 5.0 or later is required for the following controllers:
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P411 Controller
HP Smart Array P711m Controller
HP Smart Array P812 Controller
To use hard drives exceeding 2.2 TB, you must create a boot volume using
offline ACU version 8.75 or later. HP Smart Array controllers do not support
boot volumes exceeding 2.2 TB. Other controllers are not supported
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 15
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 2TB 6G SAS 7.2K rpm
LFF (3.5-inch) SC Midline
1yr Warranty Hard Drive
652757-B21
Capacity
Height
Width
2,000,398MB
1.06 in (26.8 mm)
4.16 in (105.8 mm)
6.69 in (170.0 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.7 ms
8.5 ms
Full-Stroke
18.2 ms
7200 rpm
512
Rotational Speed
Bytes/Sector
Logical Blocks
Physical Configuration
3,907,029,168
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
HP 1TB 6G SAS 7.2K rpm
LFF (3.5-inch) SC Midline
1yr Warranty Hard Drive
652753-B21
Capacity
Height
Width
1,000,204MB
1.06 in (26.8 mm)
4.16 in (105.8 mm)
6.69 in (170.0 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.7 ms
8.5 ms
Full-Stroke
18.2 ms
7200 rpm
512
Rotational Speed
Bytes/Sector
Logical Blocks
Physical Configuration
1,953,525,168
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 16
QuickSpecs
Technical Specifications
HP SAS Hard Drives
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
Application
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
load intensive applications where 24/7 duty cycles are a requirement, such as database applications and
high transaction level applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
HP 1.2TB 6G SAS 10K rpm
SFF (2.5-inch) Dual Port
Enterprise 3yr Warranty
Hard Drive
718160-B21
Capacity
Height
Width
1,200,243MB
0.63 in (16.0 mm)
3.1 in (78.7 mm)
5.45 in (138.4 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.3 ms
4.6 ms
Full-Stroke
8.9 ms
Rotational Speed
Bytes/Sector
Logical Blocks
10,000 rpm
512
Physical Configuration
2,344,225,968
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
HP 900GB 6G SAS 10K rpm
SFF (2.5-inch) Dual Port
Enterprise 3yr Warranty
Hard Drive
619291-B21
Capacity
Height
Width
900,185,481,216
0.63 in (16.0 mm)
3.1 in (78.7 mm)
5.45 in (138.4 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.21 ms
3.57 ms
Full-Stroke
7.30 ms
Rotational Speed
Bytes/Sector
Logical Blocks
10,000 rpm
512
Physical Configuration
1,758,174,768
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 17
QuickSpecs
Technical Specifications
HP SAS Hard Drives
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
HP 600GB 6G SAS 10K rpm
SFF (2.5-inch) Dual Port
Enterprise 3yr Warranty
Hard Drive
581286-B21
Capacity
Height
Width
600,127,266,816
0.63 in (16.0 mm)
3.1 in (78.7 mm)
5.45 in (138.4 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.4 ms
4.0 ms
Full-Stroke
8.0 ms
Rotational Speed
Bytes/Sector
Logical Blocks
10,000 rpm
512
Physical Configuration
1,172,123,568
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
HP 450GB 6G SAS 10K rpm
SFF (2.5-inch) Dual Port
Enterprise 3yr Warranty
Hard Drive
581284-B21
Capacity
Height
Width
450,098,159,616
0.63 in (16.0 mm)
3.1 in (78.7 mm)
5.45 in (138.4 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.4 ms
4.0 ms
Full-Stroke
8.0 ms
Rotational Speed
Bytes/Sector
Logical Blocks
10,000 rpm
512
Physical Configuration
879,097,968
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 18
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 300GB 6G SAS 15K rpm
SFF (2.5-inch) Hot Plug
Enterprise 3 yr Warranty
Hard Drive
627117-B21
Capacity
Height
Width
300,000,000,000
0.63 in (16.0 mm)
3.1 in (78.7 mm)
5.45 in (138.4 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.40 ms
2.9 ms
Full-Stroke
5.30 ms
15,000 rpm
512
Rotational Speed
Bytes/Sector
Logical Blocks
Physical Configuration
585,937,500
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
HP 300GB 6G SAS 10K rpm
SFF (2.5-inch) Dual Port
Enterprise 3yr Warranty
Hard Drive
507127-B21
Capacity
Height
Width
300,000,000,000
0.63 in (16.0 mm)
3.1 in (78.7 mm)
5.45 in (138.4 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.20 ms
4.0 ms
Full-Stroke
7.45 ms
10,000 rpm
512
Rotational Speed
Bytes/Sector
Logical Blocks
Physical Configuration
585,937,500
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 19
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 300GB 6G SAS 15K rpm
SFF (2.5-inch) Hot Plug
Enterprise 3 yr Warranty
Hard Drive
627117-B21
Capacity
Height
Width
300,000,000,000
0.63 in (16.0 mm)
3.1 in (78.7 mm)
5.45 in (138.4 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.40 ms
2.9 ms
Full-Stroke
5.30 ms
15,000 rpm
512
Rotational Speed
Bytes/Sector
Logical Blocks
Physical Configuration
585,937,500
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
HP 146GB 6G SAS 15K rpm
SFF (2.5-inch) Dual Port
Enterprise 3yr Warranty
Hard Drive
512547-B21
Capacity
Height
Width
146,815,737,856
0.63 in (16.0 mm)
3.1 in (78.7 mm)
5.45 in (138.4 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.4 ms
3.0 ms
Full-Stroke
7.0 ms
Rotational Speed
Bytes/Sector
Logical Blocks
15,000 rpm
512
Physical Configuration
286,749,488
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 20
QuickSpecs
Technical Specifications
HP SAS Hard Drives
SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
Application
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
load intensive applications where 24/7 duty cycles are a requirement, such as database applications and
high transaction level applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
HP 600GB 6G SAS 15K rpm
LFF (3.5-inch) Dual Port
Enterprise 3yr Warranty
Hard Drive
516828-B21
Capacity
Height
Width
600,127,266,816
1.04 in (26.4 mm)
4.36 in (110.7 mm)
7.43 in (188.7 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.2ms
3.5ms
Full-Stroke
6.8ms
Rotational Speed
Bytes/Sector
Logical Blocks
15,000rpm
512
Physical Configuration
1,172,123,568
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
HP 450GB 6G SAS 15K rpm
LFF (3.5-inch) Dual Port
Enterprise 3yr Warranty
Hard Drive
516816-B21
Capacity
Height
Width
450,098,159,616
1.04 in (26.4 mm)
4.36 in (110.7 mm)
7.43 in (188.7 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.2ms
3.5ms
Full-Stroke
6.8ms
Rotational Speed
Bytes/Sector
Logical Blocks
15,000rpm
512
Physical Configuration
879,097,968
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 21
QuickSpecs
Technical Specifications
HP SAS Hard Drives
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
HP 300GB 6G SAS 15K rpm
LFF (3.5-inch) Dual Port
Enterprise 3yr Warranty
Hard Drive
516814-B21
Capacity
Height
Width
300,000,000,000
1.04 in (26.4 mm)
4.36 in (110.7 mm)
7.43 in (188.7 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.2ms
3.5ms
Full-Stroke
6.8ms
Rotational Speed
Bytes/Sector
Logical Blocks
15,000rpm
512
Physical Configuration
585,937,500
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Application
SAS Midline drives are intended for servers and storage solutions where high capacities are required.
These drives have moderately-priced reliability and performance for non-mission critical, low workload
applications, such as disk backup, archival, and reference applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 22
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 1TB 6G SAS 7.2K rpm
SFF (2.5-inch) Dual Port
Midline 1yr Warranty Hard
Drive
605835-B21
Capacity
Height
Width
1,000,204,886,016
0.63 in (16.0 mm)
3.1 in (78.7 mm)
5.45 in (138.4 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.5 ms
8.2ms
Full-Stroke
17.55 ms
7,200 rpm
512
Rotational Speed
Bytes/Sector
Logical Blocks
Physical Configuration
976,773,168
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
HP 500GB 6G SAS 7.2K rpm
SFF (2.5-inch) Dual Port
Midline 1yr Warranty Hard
Drive
507610-B21
Capacity
Height
Width
500,107,862,016
0.63 in (16.0 mm)
3.1 in (78.7 mm)
5.45 in (138.4 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.5 ms
8.2ms
Full-Stroke
17.55 ms
7,200 rpm
512
Rotational Speed
Bytes/Sector
Logical Blocks
Physical Configuration
976,773,168
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 23
QuickSpecs
Technical Specifications
HP SAS Hard Drives
SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives
Application
SAS Midline drives are intended for servers and storage solutions where high capacities are required.
These drives have moderately-priced reliability and performance for non-mission critical, low workload
applications, such as disk backup, archival, and reference applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
HP 4TB 6G SAS 7.2K rpm
LFF (3.5-inch) Midline 1yr
Warranty Hard Drive
693689-B21
Capacity
Height
Width
4,000,787MB
1.04 in (26.4 mm)
4.36 in (110.7 mm)
7.43 in (188.7 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.7 ms
8.5 ms
Full-Stroke
15.7 ms
7,200 rpm
512
Rotational Speed
Bytes/Sector
Logical Blocks
Physical Configuration
7,814,037,168
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
NOTE: To support HP hard drives exceeding 2.2 TB, HP Smart Array Firmware
version 5.0 or later is required for the following controllers:
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P411 Controller
HP Smart Array P711m Controller
HP Smart Array P812 Controller
To use hard drives exceeding 2.2 TB, you must create a boot volume using
offline ACU version 8.75 or later. HP Smart Array controllers do not support
boot volumes exceeding 2.2 TB. Other controllers are not supported
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 24
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 3TB 6G SAS 7.2K rpm
LFF (3.5-inch) Midline 1yr
Warranty Hard Drive
625031-B21
Capacity
Height
Width
3,000,592,982,016
1.04 in (26.4 mm)
4.36 in (110.7 mm)
7.43 in (188.7 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.5 ms
<8.1 ms
15.5 ms
7,200 rpm
512
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
Physical Configuration
5,860,533,168
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
NOTE: To support HP hard drives exceeding 2.2 TB, HP Smart Array Firmware
version 5.0 or later is required for the following controllers:
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P411 Controller
HP Smart Array P711m Controller
HP Smart Array P812 Controller
To use hard drives exceeding 2.2 TB, you must create a boot volume using
offline ACU version 8.75 or later. HP Smart Array controllers do not support
boot volumes exceeding 2.2 TB. Other controllers are not supported
HP 2TB 6G SAS 7.2K rpm
LFF (3.5-inch) Dual Port
Midline 1yr Warranty Hard
Drive
507616-B21
Capacity
Height
Width
2,000,398,934,016
1.04 in (26.4 mm)
4.36 in (110.7 mm)
7.43 in (188.7 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.5 ms
8.5 ms
Full-Stroke
16.2 ms
7,200 rpm
512
Rotational Speed
Bytes/Sector
Logical Blocks
Physical Configuration
3,907,029,168
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 25
QuickSpecs
Technical Specifications
HP SAS Hard Drives
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
HP 1TB 6G SAS 7.2K rpm
LFF (3.5-inch) Dual Port
Midline 1yr Warranty Hard
Drive
507614-B21
Capacity
Height
Width
1,000,204,886,016
1.04 in (26.4 mm)
4.36 in (110.7 mm)
7.43 in (188.7 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.5 ms
8.5 ms
Full-Stroke
16.2 ms
7,200 rpm
512
Rotational Speed
Bytes/Sector
Logical Blocks
Physical Configuration
1,953,525,168
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
SAS Non-Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
Application
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
load intensive applications where 24/7 duty cycles are a requirement, such as database applications and
high transaction level applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 26
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 600GB 6G SAS 10K rpm
SFF (2.5-inch) Non-hot
Plug Dual Port Enterprise
3yr Warranty Hard Drive
590698-B21
Capacity
Height
Width
600,127,266,816
0.591 in (15.00 mm)
2.750 in (69.85 mm)
3.937 in (100.0 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.4 ms
4.0 ms
Full-Stroke
8.0 ms
Rotational Speed
Bytes/Sector
Logical Blocks
10,000 rpm
512
Physical Configuration
1,172,123,568
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
HP 300GB 6G SAS 10K rpm
SFF (2.5-inch) Non-hot
Plug Dual Port Enterprise
3yr Warranty Hard Drive
537809-B21
Capacity
Height
Width
300,000,000,000
0.591 in (15.00 mm)
2.750 in (69.85 mm)
3.937 in (100.0 mm)
SAS
Depth
Interface
Transfer Rate
6 Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.20 ms
4.0 ms
Full-Stroke
7.45 ms
10,000 rpm
512
Rotational Speed
Bytes/Sector
Logical Blocks
Physical Configuration
585,937,500
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 27
QuickSpecs
Technical Specifications
HP SAS Hard Drives
SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
Application
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
load intensive applications where 24/7 duty cycles are a requirement, such as database applications and
high transaction level applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
HP 600GB 6G SAS 15K rpm
LFF (3.5-inch) Non-hot
Plug Dual Port Enterprise
3yr Warranty Hard Drive
516830-B21
Capacity
Height
Width
600,127,266,816
1.028 in (26.1 mm)
4.0 in (101.6 mm)
5.787 in (147.0 mm)
SAS
Depth
Interface
Transfer Rate
6Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.2ms
3.5ms
Full-Stroke
6.8ms
Rotational Speed
Bytes/Sector
Logical Blocks
15,000 rpm
512
Physical Configuration
1,172,123,568
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
HP 450GB 6G SAS 15K rpm
LFF (3.5-inch) Non-hot
Plug Dual Port Enterprise
3yr Warranty Hard Drive
516826-B21
Capacity
Height
Width
450,098,159,616
1.028 in (26.1 mm)
4.0 in (101.6 mm)
5.787 in (147.0 mm)
SAS
Depth
Interface
Transfer Rate
6Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.2ms
3.5ms
Full-Stroke
6.8ms
Rotational Speed
Bytes/Sector
Logical Blocks
15,000 rpm
512
Physical Configuration
879,097,968
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 28
QuickSpecs
Technical Specifications
HP SAS Hard Drives
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
HP 300GB 6G SAS 15K rpm
LFF (3.5-inch) Non-hot
Plug Dual Port Enterprise
3yr Warranty Hard Drive
516824-B21
Capacity
Height
Width
300,000,000,000
1.028 in (26.1 mm)
4.0 in (101.6 mm)
5.787 in (147.0 mm)
SAS
Depth
Interface
Transfer Rate
3Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.2ms
3.5ms
Full-Stroke
6.8ms
Rotational Speed
Bytes/Sector
Logical Blocks
10,000rpm
512
Physical Configuration
585,937,500
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
SAS Quick Release SFF (2.5-inch) Enterprise (ENT) Drives
Application
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
load intensive applications where 24/7 duty cycles are a requirement, such as database applications and
high transaction level applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 29
QuickSpecs
Technical Specifications
HP SAS Hard Drives
HP 1.2TB 6G SAS 10K rpm
SFF (2.5-inch) Quick-
release Dual Port ENT 3y
Warranty Hard Drive
697572-B21
Capacity
Height
Width
1,200,243MB
0.740 in (18.8 mm)
2.909 in (73.9 mm)
3.945 in (100.2 mm)
SAS
Depth
Interface
Transfer Rate
6Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
4.6ms
8.9ms
Full-Stroke
8.0ms
Rotational Speed
Bytes/Sector
Logical Blocks
10,000rpm
512
Physical Configuration
2,344,225,968
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
HP 300 GB 6G SAS 10K SFF
(2.5-inch) Quick-release
Dual Port ENT 3y
574879-B21
Capacity
Height
Width
300,000,000,000
0.740 in (18.8 mm)
2.909 in (73.9 mm)
3.945 in (100.2 mm)
SAS
Warranty Hard Drive
Depth
Interface
Transfer Rate
6Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.3ms
4.0ms
Full-Stroke
8.0ms
Rotational Speed
Bytes/Sector
Logical Blocks
10,000rpm
512
Physical Configuration
585,937,500
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 30
QuickSpecs
Technical Specifications
HP SAS Hard Drives
SAS Quick Release LFF (3.5-inch) Enterprise (ENT) Drives
Application
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
load intensive applications where 24/7 duty cycles are a requirement, such as database applications and
high transaction level applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
HP 600 GB 6G SAS 15K LFF
(3.5-inch) Quick-release
Dual Port ENT 3y
574758-B21
Capacity
Height
Width
600,127,266,816
1.165 in (29.6 mm)
4.157 in (105.6 mm)
5.787 in (147.0 mm)
SAS
Warranty Hard Drive
Depth
Interface
Transfer Rate
6Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.2ms
3.5ms
Full-Stroke
6.8ms
Rotational Speed
Bytes/Sector
Logical Blocks
15,000 rpm
512
Physical Configuration
1,172,123,568
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
HP 300 GB 6G SAS 15K LFF
(3.5-inch) Quick-release
Dual Port ENT 3y
585980-B21
Capacity
Height
Width
300,000,000,000
1.165 in (29.6 mm)
4.157 in (105.6 mm)
5.787 in (147.0 mm)
SAS
Warranty Hard Drive
Depth
Interface
Transfer Rate
6Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.2ms
3.5ms
Full-Stroke
6.8ms
Rotational Speed
Bytes/Sector
Logical Blocks
15,000 rpm
512
Physical Configuration
585,937,500
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 31
QuickSpecs
Technical Specifications
HP SAS Hard Drives
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
SAS Quick Release LFF (3.5-inch) Midline (MDL) Drives
Application
SAS Midline drives are intended for servers and storage solutions where high capacities are required.
These drives have moderately-priced reliability and performance for non-mission critical, low workload
applications, such as disk backup, archival, and reference applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
HP 4TB 6G SAS 7.2k rpm
LFF (3.5-inch) Quick-
release Dual Port MDL 1y
Warranty Hard Drive
697956-B21
Capacity
Height
Width
4,000,787MB
1.165 in (29.6 mm)
4.157 in (105.6 mm)
5.787 in (147.0 mm)
SAS
Depth
Interface
Transfer Rate
6Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.7 ms
8.5 ms
Full-Stroke
15.7 ms
7,200 rpm
512
Rotational Speed
Bytes/Sector
Logical Blocks
Physical Configuration
7,814,037,168
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
NOTE: To support HP hard drives exceeding 2.2 TB, HP Smart Array Firmware
version 5.0 or later is required for the following controllers:
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P411 Controller
HP Smart Array P711m Controller
HP Smart Array P812 Controller
To use hard drives exceeding 2.2 TB, you must create a boot volume using
offline ACU version 8.75 or later. HP Smart Array controllers do not support
boot volumes exceeding 2.2 TB. Other controllers are not supported
HP 2TB 6G SAS 7.2K rpm
574761-B21
Capacity
2,000,398,934,016
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 32
QuickSpecs
Technical Specifications
HP SAS Hard Drives
LFF (3.5-inch) Quick-
release Dual Port MDL 1yr
Warranty Hard Drive
Height
Width
1.165 in (29.6 mm)
4.157 in (105.6 mm)
5.787 in (147.0 mm)
SAS
Depth
Interface
Transfer Rate
6Gb/sec
Synchronous (Maximum)
Seek Time
(typical reads, including
settling)
Single Track
Average
0.7 ms
8.5 ms
Full-Stroke
18.2 ms
7,200 rpm
512
Rotational Speed
Bytes/Sector
Logical Blocks
Physical Configuration
3,907,029,168
Operating Temperature 50° to 95° F (10° to 35° C)
(System Inlet Air
Temperature)
Environment-friendly
Products and Approach
End-of-life Management Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
and Recycling
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2013 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel
Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 33
|