HANNspree Flat Panel Television LT01 10U1 User Manual

Quick Start Guide  
LT01-10U1 9.6" Liquid Crystal Display TV  
This guide is designed as a reference to help you start using your LCD TV quickly. Please refer to the User's Manual for more detailed installation and safety instructions.  
Front View  
Rear View  
Volume  
adjust  
Channel  
select  
Remote IR sensor/Power indicator LED  
Making Connections  
Connecting to Antenna/Cable TV  
A/V and Channel Setup  
Watching Broadcast or Cable TV  
1. Connect one end of the VHF/UHF  
1. After you have made the appropriate power and  
source connections, press the power button  
to turn on your television.  
(Antenna) or CATV cable to ANT  
Jack (VHF/UHF IN Jack) on the back  
of the TV.  
2. Press the TV button to select TV.  
3. Press the MENU button on the  
control panel to enter the OSD menu.  
2. Connect the other end of the  
VHF/UHF (Antenna) or CATV cable  
to the Antenna or CATV socket.  
4. Press the  
button to select the TV setting.  
5. Press the MENU button.  
6. Press the  
button to select TV/CATV.  
Selecting A/V Sources  
1. Make sure your TV is turned on and a  
device such as a DVD player is connected.  
Connecting to a VCR, VCD, DVD Player, or Video Game Console  
1. The illustration presented  
here shows you how to  
connect your TV to a  
2. The cables are  
color-coded (black,  
red, white, yellow).  
Connect each color-  
coded cable to  
2. Press the TV button on the control panel to  
select different source signals.TV/CATV  
channel number,AV1 or AV2 appear on  
the screen.  
VCR  
VCD  
DVD  
VCR, VCD, DVD player  
or video game console.  
the appropriate  
connector on your  
device.  
4-IN-1 A/V jack  
Auto Channel Setup  
B
R
W
Y
Video game console  
1. Press the MENU button to enter the OSD menu.  
B
AV  
connectors  
R
2. Use the channel buttons on the control panel to select the “TV Setting” menu.  
3. Press the MENU button to enter the TV Setting menu.  
W
Y
4. Press channel buttons to select Auto Program.  
5. Press the MENU button to enter the Auto Program Setting submenu.  
6. Press channel buttons to select ON or OFF and press the MENU button.  
7. Your television will begin automatically memorizing the available channels.  
Connecting the Power Adapter  
1. Connect the power cord to the power  
adapter as illustrated.  
Auto Program  
2. Plug the power adapter connector into  
the DC-IN input jack on the rear panel  
of the TV.  
TV Setting  
+
CH  
A
M
-
3. Insert the three-pronged plug at the  
other end of the power cord into a  
power outlet.  
Auto Program  
Note : For information on connecting your  
TV to a computer, refer to the user's  
manual.  
ON  
OFF  
Copyright 2004, Hannspree California, Inc. All rights reserved.  
MAD-001145  

Graco Car Seat ISPA122AB User Manual
Grizzly Sander G0723 User Manual
Haier Washer HWMP95TL User Manual
Harbor Freight Tools Impact Driver 93100 User Manual
Hearth and Home Technologies Indoor Fireplace ST TRC User Manual
Honeywell Portable Radio TE821WD User Manual
Honeywell Ventilation Hood 69 2480EF05 User Manual
Hotpoint Range RB526CWW User Manual
HP Hewlett Packard Power Supply MA7200 Plus User Manual
Humax Stereo Receiver VA FOX T User Manual