MODEL H0587
AIR WONDER
VACUUM KIT
INSTRUCTION SHEET
E
EYE INJURY HAZARD!
Always wear safety glasses
during use to prevent
D
A
serious personal injury.
C
INJURY HAZARD!
When servicing, always dis-
connect tool from air to pre-
vent unexpected operation.
B
120 PSI
Figure 1. Model H0587 inventory.
MAX AIR PRESSURE!
Exceeding this PSI may
result in injury/tool damage.
Assembly
1. Insert the extension tube into the front of the
vacuum, and install a 1⁄4" NPT male quick-dis-
connect fitting (not included) into the bottom
of the vacuum.
LUNG INJURY HAZARD!
Always wear a respirator
during use to reduce
exposure to dust.
2. Place a clamp on the funnel-shaped end of
the hose, insert the vacuum into the hose,
and tighten the clamp (see Figure 2).
Specifications
Operating Pressure .................................. 90 PSI
Air Inlet ....................................................1⁄4" NPT
Weight ......................................................11⁄2 lbs.
Hose
Clamps
Inventory (Figure 1)
Qty
A. Hose........................................................... 1
B. Vacuum ...................................................... 1
C. Extension Tube .......................................... 1
D. Hose Clamps.............................................. 2
E. Dust Collection Bag.................................... 1
Trigger
Figure 2. Vacuum kit assembled.
3. Place a clamp over the dust collection bag,
insert the end of the hose into the bag, and
tighten the clamp (see Figure 2).
COPYRIGHT © MARCH, 2007 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#BL9088 PRINTED IN TAIWAN
|