G4787 Breakdown
+
&(
'%
*
)
(
,
&
&(
&'
'
MODEL G4787
INDUSTRIAL BUFFING MACHINE
SPECIFICATIONS
TO REDUCE RISK OF SERIOUS INJURY WHEN USING THIS MACHINE:
1. READ AND UNDERSTAND MANUAL BEFORE STARTING.
MOTOR:
1
HP, 220V, SINGLE-PHASE
MOTOR AMPS: 8A
2. ALWAYS WEAR EYE PROTECTION AND
A
RESPIRATOR!
3. PLUG POWER CORD INTO GROUNDED OUTLET ONLY.
4. NEVER PLACE HANDS ON ROTATING BUFFING WHEEL.
5. DO NOT WEAR LOOSE CLOTHING, GLOVES OR JEWELRY.
SECURE LONG HAIR AND BUTTON ALL LONG SLEEVE SHIRTS.
6. DISCONNECT POWER PRIOR TO CHANGING WHEELS,
OR ADJUSTING.
MOTOR SPEED: 1200 RPM
SHAFT SIZE W/THREAD: 8"
X
7/8"
TOTAL SHAFT LENGTH: 11-3/4"
WRENCH SIZE: 1-3/8" (2)
SPACERS: 1"(4), 1-1/2"(4), 2"(2)
WEIGHT: 78 LBS.
7. DO NOT OPERATE UNDER INFLUENCE OF DRUGS OR ALCOHOL.
8. MAKE SURE MACHINE IS PROPERLY ADJUSTED AND SET UP
CORRECTLY BEFORE STARTING MOTOR.
9. MAKE SURE MACHINE IS SECURED TO
BEFORE STARTING.
FIRM GRIP ON THE WORKPIECE.
A
STABLE SURFACE
10. KEEP
A
Date
11. ENSURE ANY LARGE WORKPIECE IS PROPERLY SUPPORTED
THROUGHOUT THE BUFFING OPERATION.
12. DO NOT USE WORKPIECES WITH NAILS, LOOSE KNOTS, LARGE
SPLINTERS OR ANY CONDITION THAT MAY CAUSE WHEEL TO
GRAB AND PROJECT WORKPIECE.
Serial Number
Manufactured for Grizzly in Taiwan
&%
&&
&'
."
'
.
&'
&(
&)
DEI>DC6AꢀHI6C9
HDA9ꢀH:E6G6I:AN
&*
-43-
g3622-23/g3708/g4787-88 industrial Buffer
|