Grandstream Networks Telephone Accessories GXW 400X FXS User Manual

BroadSoft Partner

Configuration Guide

Grandstream GXW-400X

FXS Analog Gateway

HandyTone HT-50X

Analog Telephone Adapter

April 2007

Document Version 1.1

Document Revision History

Version

Reason for Change

1.1

Introduced document.

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X

DOCUMENT NUMBER

PAGE 3 OF 25

Table of Contents

Overview..........................................................................................................................................5

BroadWorks Validation Package Support Level.......................................................................6

Device Capabilities and Known Interoperability Issues...........................................................7

3.1 Capabilities....................................................................................................................................7

3.2 Interoperability Issues...................................................................................................................9

BroadWorks Device Identity/Profile..........................................................................................10

BroadWorks Device Type...........................................................................................................11

Configuration................................................................................................................................12

6.1 System Level Configuration...................................................................................................... 13

6.2 Subscriber Level Configuration Parameters............................................................................ 14

Enhanced IP Phone Configuration............................................................................................15

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X

DOCUMENT NUMBER

PAGE 4 OF 25

Overview

This document describes the configuration procedures required for a Grandstream GXW-

4004 / GXW-4008 / HT-502 to make full use of the capabilities of BroadWorks.

The GXW-4004 / GXW-4008 / HT-502 are a few of the many access devices that

interoperate with BroadWorks.

The GXW-4004 / GXW-4008 / HT-502 uses the Session Initiation Protocol (SIP) to

communicate with BroadWorks for call control. It also translates voice to audio packets for

transmission across a packet network.

This guide describes the specific configuration items that are important for use with

BroadWorks. It does not describe the purpose and use of all configuration items on the

GXW-4004 / GXW-4008 / HT-502. For those details, see the GXW-4004 / GXW-4008 /

HT-502 User Manual supplied by Grandstream 1.a)i.[1]

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X

DOCUMENT NUMBER

PAGE 5 OF 25

BroadWorks Validation Package Support Level

Devices are validated according to BroadWorks Validation Packages. Each package

validates a subset of features or items. This section describes the device’s support level

for a BroadWorks Validation Package as well as the features or items in the package that

are not supported. For specific issues, see section 3.2 Interoperability Issues. For a

complete list of items validated per package, see Appendix B: BroadWorks Validation

Package Test Items.

BroadWorks Package

Basic Call

Support Level

Full

Items Not Supported

BroadWorks Enhanced Services

Partial

Ring Splash

Advanced Call Control (Talk, Auto-

Answer)

DUT Services – Call Control

Partial

Network Conference 3-Way

Network Conference N-Way

DUT Services – Registration and

Authentication

BroadWorks Authentication

DUT Services – FAX

DUT Services – Busy Lamp Field

Redundancy

Full

None

Full

SBC/ALG

Full

Shared Call Appearance

Video

None

Full

TCP

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X

DOCUMENT NUMBER

PAGE 6 OF 25

Device Capabilities and Known Interoperability Issues

This section describes the features supported by the GXW-4004 / GXW-4008 / HT-502,

as well as BroadWorks interoperability issues and impact. The following table describes

capabilities.

Verified Revisions shows the results of partner (vendor) testing of a specific BroadWorks

version with a specific partner’s device under test (DUT) version.

Compatible Revisions indicates the maintenance versions that should interface properly

with BroadWorks.

3.1 Capabilities

Device Type

Generic SIP Smart (Proxy Addr)

Lines and Appearances

GXW-4004: 4 lines 1 appearances per line

GXW-4008: 8 lines 1 appearances per line

HT-502: 2 lines 1 appearances per line

Speaker/Power/Bridge

Verified Revisions

No/No/Yes

BroadWorks Release 14.0

GXW-4004: Grandstream 1.0.0.39

GXW-4008: Grandstream 1.0.0.39

HT-502: Grandstream 1.0.0.39

Compatible Revisions

BroadWorks Release 14.0

Grandstream Any maintenance version of GXW-

4004/GXW-4008/HT-502 1.0.0.39

SIP Proxy FQDN DNS Lookup

(A, SRV, NAPTR)

A, SRV

Outbound Proxy Configurable

Yes

Outbound Proxy FQDN DNS Lookup

(A, SRV, NAPTR)

A, SRV

BroadWorks Redundancy Enabled

BroadWorks Shared Call Appearance

Yes

N/A

BroadWorks Enhanced IP Phone

Configuration

Partial

Device Services

Call Forwarding, Attended/Blind Call Transfer, 3-way

Call, Call Waiting, Call Hold, Call Return.

Device Call Control

Device-Controlled

(Device-Controlled or Flash INFO-

based)

Codecs

PCMU, PCMA, G723.1 G729A/B/E, iLBC, G726-

16/24/32/40

RFC 2833 DTMF

T.38 Fax

Yes

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X

DOCUMENT NUMBER

PAGE 7 OF 25

TCP

TLS

Yes

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X

DOCUMENT NUMBER

PAGE 8 OF 25

3.2 Interoperability Issues

This section lists the known interoperability issues between BroadWorks and partner

release(s). For more information on issues related to the particular software release, see

the partner release notes (generally, this should only be for GA partner releases).

Issue Tracking

Number

Issue Title and Description

BroadWorks Release 14

Partner Releases

1025 - 61

1025 -119

Broadworks to DUT, Do Not Disturb (DND) ring splash

DUT does not play a ring splash. DUT driver does not support ring

splash.

DUT to BroadWorks via Primary Application Server, DUT

Currently Served by Secondary Application Server

DUT does not always contact the primary server first for INVITE. It

relies on the OPTIONS message from BroadWorks to failback.

When DUT is registered on secondary server and the primary

server becomes available and sends an OPTIONS request, DUT

will send INVITE to the primary server.

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X

DOCUMENT NUMBER

PAGE 9 OF 25

BroadWorks Device Identity/Profile

BroadWorks configurable device identify/profile is introduced in BroadWorks Release 14.0.

This section applies only to BroadWorks Release 14.0 and later.

The following table identifies the required BroadWorks device identity/profile settings for

interoperability between the GXW-4004/GXW-4008/HT-502 and BroadWorks. For an

explanation of the profile parameters, refer to the BroadWorks Device Inventory Guide

1.a)i.[4].

For most of the parameters below, an “X” indicates the parameter function is supported

and/or required. If the item is blank, it is not supported.

Grandstream GXW-4004/GXW-4008/HT-502 Identify/Device Profile

Signaling Address Type

Number of Lines

Intelligent Proxy Addressing

GXW-4004: 4 lines

GXW-4008: 8 lines

HT-502: 2 lines

Ringback Tone/ Early Media

Support

Local Ringback – No Early Media

Registration Capable

Static Registration Capable

E.164 Capable

Trusted

Authentication Override

Video Capable

RFC 3264 Hold

Route Advance

Wireless Integration

PBX Integration

Use Business Trunking Contact

Forwarding Override

Conference Device

Music On Hold Device

Web Based Configuration URL

Auto Configuration Type

Reset Event

2 Config file

checkSync

Enable Monitoring

CPE System File Name

Device File Format

gxwSystem.txt / htSystem.txt

%BWMACADDRES%.txt

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X

DOCUMENT NUMBER

PAGE 10 OF 25

BroadWorks Device Type

This section applies to BroadWorks Release 13.0 and before.

The following BroadWorks device type should be used for Grandstream GXW-4004 /

GXW-4008 /HT-502.

„

Grandstream GXW-4004

Grandstream GXW-4008

Grandstream HT-502

The above device types require BroadWorks Release 14 MP<TBD>. If the BroadWorks

system is currently at a lower patch level, either apply the necessary patch or use the

following generic device type until the system can be patched accordingly.

„

Generic SIP Smart (Proxy Addr)

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X

DOCUMENT NUMBER

PAGE 11 OF 25

Configuration

Grandstream GXW-4004 / GXW-4008 / HT-502 can be configured via Web GUI Interface

as well as via Configuration File through TFTP or HTTP.

The GXW-4004 / GXW-4008 / HT-502 accepts configuration files in a proprietary binary

format which is produced by the Grandstream configuration tool. The configuration tool

creates a device configuration file based on a configuration template and the device’s

MAC address. All Grandstream products’ sample configuration templates are available on

Grandstream’s web site. A configuration template file contains all configuration

parameters available for a product, with comments describing allowed values of the

parameters. For a detailed parameter list, please refer to the corresponding firmware

release configuration template 1.a)i.[2].

When Grandstream device boots up or reboots, it will issue request for a binary

configuration file named “cfgxxxxxxxxxxxx”, where “xxxxxxxxxxxx” is the LAN MAC

address of the device, i.e., “cfg000b820102ab”. The configuration file name should be in

lower cases.

Grandstream offers free Configuration File generator software in both Linux/Unix and

Windows platform. Both Configuration File Generators can be downloaded from

Grandstream official web site at http://www.grandstream.com/configurationtool.html

1.a)i.[2].

The following examples describe how to set the parameters using a configuration file.

The GXW-4004 / GXW-4008 / HT-502 should be configured to load the configuration file

each time it resets or re-synchronizes. For detailed information on automated provisioning,

please check the GXW-4004 / GXW-4008 / HT-502 User Manual 1.a)i.[1] and the

Grandstream configuration tool user guide 1.a)i.[2].

The capabilities of the GXW-4004 / GXW-4008 / HT-502 have been verified for use with

BroadWorks based on the settings described in the following table. For more information

on the meaning, purpose, and applicability of the individual configuration items, see the

GXW-4004 / GXW-4008 / HT-502 configuration template 1.a)i.[2].

Configuration Files

Files Provided by Partner

Level

Description

gxw4004prog.bin/gxw4004core.bin/gxw4

004boot.bin/gxw4004base.bin

System

Contains the device firmware load.

gxw4008prog.bin/gxw4008core.bin/gxw4

008boot.bin/gxw4008base.bin

ht502prog.bin/ht502core.bin/ht502boot.bi

n/ht502base.bin

GXW-4004 / GXW-4008 / HT-502

Configuration Template

System and

Subscriber

Contains configurable parameters that

apply to all devices in a given

deployment.

Example: gxw400x_config_1.0.0.39.txt

ht502_config_1.0.0.39.txt

cfgMAC

System and

Subscriber

Binary configuration file generated

from configuration template and an

individual device’s MAC address

Example: cfg000b82000000

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X

DOCUMENT NUMBER

PAGE 12 OF 25

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X

DOCUMENT NUMBER

PAGE 13 OF 25

6.1 System Level Configuration

This section describes system-wide configuration items that are generally required for

each GXW-4004 / GXW-4008 / HT-502 to work with BroadWorks. Subscriber-specific

settings are described in the next section.

Step

Command

Purpose

System Configuration File <system-wide configuration file name>

Set SIP Proxy/Domain.

Step 1

Set the GXW-4004 / GXW-4008

/ HT-502 SIP server to the Fully

Qualified Domain Name (FQDN)

for the BroadWorks Application

Server cluster.

SIP Server = as.broadworks.net

The domain must match the

domain configured for the

BroadWorks subscriber’s

line/port domain.

Set Outbound Proxy.

Step 2

Set the outbound proxy to the

session border controller (SBC)

if one is deployed between the

GXW-4004 / GXW-4008 / HT-

502 and BroadWorks.

OutBound Proxy =

sbc.broadworks.net

If there are redundant SBCs, set

it to the FQDN for the SBC

cluster.

Enable DNS SRV lookup.

Step 3

Step 4

Step 5

Enable DNS SRV lookups.

Use DNS SRV = “Yes”

Set register mode.

Enable SIP register.

SIP Registration = “Yes”

Set SIP Timers.

The default registration period is

60 minutes.

Enable negotiated DTMF type.

Step 6

Step 7

Set the GXW-4004 / GXW-4008

/ HT-502 to enable inband or

RFC 2833 negotiated DTMF.

Send DTMF = “via RTP (RFC2833)”

Configure dialplan.

Example:

Configure the GXW-4004 /

GXW-4008 / HT-502 dial plan

according to the locale.

Dial Plan = “{ x+ }”

The dial plan shown is the

device default dial plan – any

number is allowed.

Disable local feature code

services.

Step 8

Disable feature access codes

controlled by the device.

Enable Call Features = “No”

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X

DOCUMENT NUMBER

PAGE 14 OF 25

6.2 Subscriber Level Configuration Parameters

This section identifies the device-specific parameters, including registration and

authentication. These settings must be unique across devices in order to be matched with

the settings for a BroadWorks subscriber.

Provisioning a subscriber to register with BroadWorks allows calls to terminate to the

subscriber’s line. Registration requires that a unique address of record (AoR) is

provisioned on BroadWorks and the phone; provisioning an AoR on BroadWorks consists

of setting the line/port parameter to a unique value within the Application Server cluster.

Grandstream GXW-4004 / GXW-4008 / HT-502 supports four SIP accounts (lines), eight

SIP accounts, and two SIP accounts respectively. The follow example shows how to

configure subscriber elements for an account.

Step

Command

Purpose

Subscriber Configuration Items

Set Register User ID for each

line.

Step 1

Step 2

The register user ID must

correspond with the line/port

setting on BroadWorks.

Example:

SIP User_ID = "2405551111" ;

Enable SIP Authentication for

each line.

If the Authentication service is

configured on BroadWorks, these

parameters must be configured to

match the BroadWorks settings.

Example:

Authenticate ID =

"[email protected]" ;

Authenticate Password =

"welcome" ;

Configure display name for each

line.

Step 3

Step 4

For each line, configure the name

to be displayed on the device.

Example:

Name = “Claire Smith” ;

Select SIP Profile for each line.

Example:

Set SIP Profile or each line.

Profile ID = Profile 1

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X

DOCUMENT NUMBER

PAGE 15 OF 25

Enhanced IP Phone Configuration

Enhanced IP Phone Configuration is a BroadWorks feature that enables automatic

generation of device configuration files, given administrator-supplied templates.

For more information on the Enhanced IP Phone Configuration feature, see the Enhanced

IP Phone Configuration Guide 1.a)i.[3].

NOTE: BroadSoft does not manage or distribute template files for use with the Enhanced IP

Phone Configuration feature. Obtain template files from Grandstream or use the configuration

files obtained from Grandstream for the specific GXW-4004 / GXW-4008 / HT-502 firmware

release to create template files appropriate for your installation.

Since the GXW-4004 / GXW-4008 / HT-502 SIP phones require the configuration files be

converted into a binary format, an extra step must be performed when using this feature. After

the configuration files have been sent to the TFTP server and before the phone is reset, the

configuration files must be converted to binary format using Grandstream’s configuration tool. .

For detailed information on automated provisioning, please check the Grandstream configuration

tool user guide 1.a)i.[2].

The GXW-4004 / GXW-4008 / HT-502 use only a phone-specific file to configure the

device. However, the Enhanced IP Phone Configuration feature requires a system and a

phone-specific file for each device. To satisfy the system file requirement, an empty file

(gxwDefault.txt, htDesfult.txt) will need to be uploaded to BroadWorks as the system file.

This file will be sent to the FTP server but will not actually be used for the configuration file

generation. The group template file is used to build the configuration files for the devices

of this device type assigned to the group. For a sample GXW-4004 / GXW-4008 / HT-502

group template file, see Appendix A.

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X

DOCUMENT NUMBER

PAGE 16 OF 25

Appendix A: Sample GXW-4004 / GXW-4008 / HT-502 Configuration Files

NOTE: The following samples are examples and should be used as a reference only. DO NOT CUT

AND PASTE THESE EXAMPLES TO GENERATE YOUR CONFIGURATION FILES. Use the

configuration files obtained from Grandstream with the specific release to generate your configuration

files.

System Default Parameters

NOTE: This is an example file and should be used for reference only.

# SIP Default Generic Configuration Parameters

##################################

# Profile/Account 1

##################################

# Profile Active. 0 - no, 1 - yes

P271 = 1

# SIP Server

P47 = as.broadworks.net

# Outbound Proxy

P48 = sbc.broadworks.net

# Use DNS SRV. 0 - no, 1 - yes.

P103 = 1

# SIP Registration. 0 - no, 1 - yes

P31 = 1

# Register Expiration (in minutes. default 1 hour, max 45 days)

P32 = 60

# DTMF via RTP (RFC2833). 0 - no, 1 - yes

P851 = 1

# Dial Plan.

P4200 = { x+ }

# Enable Call Features. 0 - no, 1 – yes

P191 = 0

###################################

# Profile/Account 2

###################################

# Profile Active. 0 - no, 1 - yes

P401 = 1

# SIP Server

P747 = as.broadworks.net

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X

DOCUMENT NUMBER

PAGE 17 OF 25

# Outbound Proxy

P748 = sbc.broadworks.net

# Use DNS SRV. 0 - no, 1 - yes.

P702 = 1

# SIP Registration. 0 - no, 1 – yes

P731 = 1

# Register Expiration (in minutes. default 1 hour, max 45 days)

P732 = 60

# DTMF via RTP (RFC2833). 0 - no, 1 - yes

P861 = 1

# Dial Plan.

P4201 = { x+ }

# Enable Call Features. 0 - no, 1 – yes

P751 = 0

Phone-Specific Parameters:

NOTE: This is an example file and should be used for reference only.

# SIP Device-specific Configuration Parameters

##################################

# HT-502 Account 1

##################################

# SIP User ID

P35 = 2405551111

# Authenticate ID

P36 = [email protected]

# Authenticate password

P34 = welcome

# Display Name

P3 = Claire Smith

##################################

# HT-502 Account 2

##################################

# Account 2 SIP User ID

P735 =

# Authenticate ID

P736 =

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X

DOCUMENT NUMBER

PAGE 18 OF 25

# Authenticate Password

P734 =

# Display Name

P703 =

############################

# GXW-4004/GXW-4008

############################

# FXS Port 1

# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -

Profile 1, 1 - Profile 2)

P4060 =

P4090 =

P4120 =

P4180 =

P4150 =

# FXS Port 2

# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -

Profile 1, 1 - Profile 2)

P4061 =

P4091 =

P4121 =

P4181 =

P4151 =

# FXS Port 3

# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -

Profile 1, 1 - Profile 2)

P4062 =

P4092 =

P4122 =

P4182 =

P4152 =

# FXS Port 4

# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -

Profile 1, 1 - Profile 2)

P4063 =

P4093 =

P4123 =

P4183 =

P4153 =

#####################################################

# The following 4 ports belong to GXW-4008 only

#####################################################

# FXS Port 5

# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -

Profile 1, 1 - Profile 2)

P4064 =

P4094 =

P4124 =

P4184 =

P4154 =

# FXS Port 6

# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X

DOCUMENT NUMBER

PAGE 19 OF 25

Profile 1, 1 - Profile 2)

P4065 =

P4095 =

P4125 =

P4185 =

P4155 =

# FXS Port 7

# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -

Profile 1, 1 - Profile 2)

P4066 =

P4096 =

P4126 =

P4186 =

P4156 =

# FXS Port 8

# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -

Profile 1, 1 - Profile 2)

P4067 =

P4097 =

P4127 =

P4187 =

P4157 =

Group Template File: GXW-GroupTemplate.txt /HT- GroupTemplate.txt

NOTE: This is an example file and should be used for reference only.

# SIP Default Generic Configuration Parameters

##################################

# Profile/Account 1

##################################

# Profile Active. 0 - no, 1 - yes

P271 = 1

# SIP Server

P47 = as.broadworks.net

# Outbound Proxy

P48 = sbc.broadworks.net

# Use DNS SRV. 0 - no, 1 - yes.

P103 = 1

# SIP Registration. 0 - no, 1 - yes

P31 = 1

# Register Expiration (in minutes. default 1 hour, max 45 days)

P32 = 60

# DTMF via RTP (RFC2833). 0 - no, 1 - yes

P851 = 1

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X

DOCUMENT NUMBER

PAGE 20 OF 25

# Dial Plan.

P4200 = { x+ }

# Enable Call Features. 0 - no, 1 – yes

P191 = 0

###################################

# Profile/Account 2

###################################

# Profile Active. 0 - no, 1 - yes

P401 = 1

# SIP Server

P747 = as.broadworks.net

# Outbound Proxy

P748 = sbc.broadworks.net

# Use DNS SRV. 0 - no, 1 - yes.

P702 = 1

# SIP Registration. 0 - no, 1 – yes

P731 = 1

# Register Expiration (in minutes. default 1 hour, max 45 days)

P732 = 60

# DTMF via RTP (RFC2833). 0 - no, 1 - yes

P861 = 1

# Dial Plan.

P4201 = { x+ }

# Enable Call Features. 0 - no, 1 – yes

P751 = 0

###################################################

# SIP Device-specific Configuration Parameters

###################################################

##################################

# HT-502 Account 1

##################################

# SIP User ID

P35 = %BWLINEPORT-1%

# Authenticate ID

P36 = %BWAUTHUSER-1%

# Authenticate password

P34 = %BWAUTHPASSWORD-1%

# Display Name (John Doe)

P3 = %BWCLID-1%

##################################

# HT-502 Account 2

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X

DOCUMENT NUMBER

PAGE 21 OF 25

##################################

# Account 2 SIP User ID

P735 = %BWLINEPORT-2%

# Authenticate ID

P736 = %BWAUTHUSER-2%

# Authenticate Password

P734 = %BWAUTHPASSWORD-2%

# Display Name

P703 = %BWCLID-2%

############################

# GXW-4004/GXW-4008

############################

# FXS Port 1

# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -

Profile 1, 1 - Profile 2)

P4060 = %BWLINEPORT-1%

P4090 = %BWAUTHUSER-1%

P4120 = %BWAUTHPASSWORD-1%

P4180 = %BWCLID-1%

P4150 =

# FXS Port 2

# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -

Profile 1, 1 - Profile 2)

P4061 = %BWLINEPORT-2%

P4091 = %BWAUTHUSER-2%

P4121 = %BWAUTHPASSWORD-2%

P4181 = %BWCLID-2%

P4151 =

# FXS Port 3

# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -

Profile 1, 1 - Profile 2)

P4062 = %BWLINEPORT-3%

P4092 = %BWAUTHUSER-3%

P4122 = %BWAUTHPASSWORD-3%

P4182 = %BWCLID-3%

P4152 =

# FXS Port 4

# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -

Profile 1, 1 - Profile 2)

P4063 = %BWLINEPORT-4%

P4093 = %BWAUTHUSER-4%

P4123 = %BWAUTHPASSWORD-4%

P4183 = %BWCLID-4%

P4153 =

#####################################################

# The following 4 ports belong to GXW-4008 only

#####################################################

# FXS Port 5

# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -

Profile 1, 1 - Profile 2)

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X

DOCUMENT NUMBER

PAGE 22 OF 25

P4064 = %BWLINEPORT-5%

P4094 = %BWAUTHUSER-5%

P4124 = %BWAUTHPASSWORD-5%

P4184 = %BWCLID-5%

P4154 =

# FXS Port 6

# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -

Profile 1, 1 - Profile 2)

P4065 = %BWLINEPORT-6%

P4095 = %BWAUTHUSER-6%

P4125 = %BWAUTHPASSWORD-6%

P4185 = %BWCLID-6%

P4155 =

# FXS Port 7

# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -

Profile 1, 1 - Profile 2)

P4066 = %BWLINEPORT-7%

P4096 = %BWAUTHUSER-7%

P4126 = %BWAUTHPASSWORD-7%

P4186 = %BWCLID-7%

P4156 =

# FXS Port 8

# SIP USER ID, Authenticate ID, Password, Display Name, Profile ID (0 -

Profile 1, 1 - Profile 2)

P4067 = %BWLINEPORT-8%

P4097 = %BWAUTHUSER-8%

P4127 = %BWAUTHPASSWORD-8%

P4187 = %BWCLID-8%

P4157 =

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X

DOCUMENT NUMBER

PAGE 23 OF 25

Appendix B: BroadWorks Validation Package Test Items

The following table describes the items tested in each BroadWorks Validation Package.

BroadWorks Validation Package

Items Supported

Basic Call

Basic Call Origination / Termination

Call Failure Codes

Session Audit

Ringback

Dial Plan

Inband DTMF

RFC 2833/Negotiation

Codec Renegotiation

BroadWorks Enhanced Services

Basic CommPilot Call Manager Functions

Voice Messaging Audio MWI

Voice Messaging Visual MWI

Ring Splash

Priority Alerting

Priority Call Waiting

Alternate Numbers

Advanced Call Control

Anonymous Call

Remote Restart

Call Park Retrieve – Answer with Hold

DUT Services – Call Control

Call Waiting

Call Hold

Blind Transfer

Attended Transfer

3-Way Call

Network Conference 3-Way

Network Conference N-Way

DUT Services – Registration and

Authentication

Authenticated Registration

Maximum Registration

Minimum Registration

Rejected Registration

Authenticated Origination

Authenticated Re-INVITE

Authenticated REFER

BroadWorks Authentication

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X

DOCUMENT NUMBER

PAGE 24 OF 25

BroadWorks Validation Package

Items Supported

DUT Services - FAX

FAX Passthrough

FAX T38

DUT Services – Busy Lamp Field

Redundancy

Basic BLF

DNS

Registration Failover

Call Setup Failover

Mid-Call Failover

SBC/ALG

Registration

Call Origination

Call Termination

Shared Call Appearance

Line Seize

Line Lamp Management

Line Hold/Retrieve

Multiple Call Arrangement

SCA Bridging

Video

TCP

Integrated Video Phone

Video Add-On

Basic

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X

DOCUMENT NUMBER

PAGE 25 OF 25

References

[1] Grandstream Networks, Inc. 2007. GXW-400X / HT-502 User Manual. Download

http://www.grandstream.com/user_manuals/GXW400x_User_Manual.pdf,

http://www.grandstream.com/user_manuals/HT502_User_Manual.pdf

AND GUI Interfaces

http://www.grandstream.com/user_manuals/GUI/GUI_GXW400x.rar,

http://www.grandstream.com/user_manuals/GUI/GUI_HT502.rar

[2] Grandstream Networks, Inc. 2007. Grandstream Configuration Tool and Templates.

Available from http://www.grandstream.com/configurationtool.html.

[3] BroadSoft, Inc. 2006. BroadWorks Enhanced IP Phone Configuration Guide,

Release 14.0. Available from the BroadSoft KnowledgeBase at

www.broadsoft.com/KnowledgeBase.

[4] BroadSoft, Inc. 2006. BroadWorks Device Inventory Guide, Release 14.0.

Available from the BroadSoft KnowledgeBase at

www.broadsoft.com/KnowledgeBase.

[5] BroadSoft, Inc. 2006. BroadWorks Redundancy Guide, Release 14.0. Available

from the BroadSoft KnowledgeBase at www.broadsoft.com/KnowledgeBase.

BROADSOFT PARTNER CONFIGURATION GUIDE – GRANDSTREAM GXW400X - HT50X

DOCUMENT NUMBER

PAGE 26 OF 25

Haier Clothes Dryer HDY60M User Manual
Haier Microwave Oven MA 2270EGC User Manual
Hasbro Games 20574 20570 User Manual
Heat Glo LifeStyle Boiler COSMO I30 User Manual
HP Hewlett Packard Landscape Lighting model 3585d User Manual
Hypertec Carrying Case N11018AHY User Manual
Hyundai Car Stereo System H CMD7087 User Manual
Hyundai Car Video System H LCDVD704 User Manual
IBM Personal Computer 8172 User Manual
Image Home Gym 831100430 User Manual