Gianni Industries Door EM NH300 User Manual

EM-NH300  
Mini Electromagnetic Lock  
Operating Features  
EM-NH300M: Bond sensor output & Status LED  
Bond sensor is used to indicate the door  
status as in a locked or unlocked condition.  
Status LED is a visual feedback for user to  
give the true status of the lock at any time.  
Green light indicates the door is insecure  
Bond sensor monitor output : SPDT rated: 3A@12VDC  
Trigger  
EM-NH300M-TD: Re-locking time delay  
Relocking Time Delay Switch ensures  
the lautomatically turns to lock mode  
N.C.  
Timer Adjust  
l
COM.  
N.O.  
Patent:  
after the door is closed properly and it  
can be adjusted from 0 to 90 seconds.  
ZL 2006 2 0122522.X  
Nr. 20 2006 012 052.1  
M308308  
Shorten  
Power  
Input  
GB 06 1 6099.8  
06 07229 (France)  
Features  
Special Mounting Plate design  
MOV provides spike and surge protection.  
Anodized aluminum housing.  
Groove template & housing for easy installation.  
Dual voltage 12 or 24 VDC (selectable).  
Anti-Residual magnetism designed.  
Complete mounting hardware included.  
Cable  
Fasten the mounting plate on  
t h e s i t e t h e n i n s t a l l  
electromagnet lock with  
power lead cable through  
mounting plate slot hole.  
Statement  
The NH series electromagnet lock is an important mounting  
plate design breakthrough. The mounting plate is designed  
with  
a
well engineered sliding mechanism that makes  
electromagnet considerably easy to clasp the mounting plate  
to allow security of use and maximize the ease of installation.  
Therefore, even if used for longer periods, the tricky  
innovation in its design will prevent the electromagnet of  
being falling when the screw are loosening up .  
The EM-NH300 Series are high quality and safety range of  
standard fail-safe electromagnetic locks that is simply, works  
well in order to effectively secure with doors. It is surface  
mounted face to face locks offering up to 600 pounds holding  
force which this lock is recommended for applications which  
require higher levels of access and egress control and is  
suitable for fire doors and emergency exit doors.  
For assembling the mounting  
plate and the electromagnet  
lock into the groove, please  
make the mark on the  
mounting plate and the mark  
on the electromagnet lock  
itself to be a straight line for  
alignment. Either aligning  
from left side or from right  
side is feasible.  
Slide the electromagnetic  
lock to fit with the mounting  
plate as the drawing. Once  
t h e c o r r e c t p o s i t i o n i s  
encountered, use the Allen  
Wrench to fasten the fixing  
screws through the bottom of  
the electromagnet lock into  
the mounting plate.  
Specifications  
Voltage Tolerance:15%  
Current Draw: 500mA@12Vdc;250mA@24Vdc  
)at 20 degree centigrade(  
Operating Temperature from -10 to 55 degree  
centigrade  
Humidity: 0~95% non-condensing.  
Holding Force: Up to 600 lbs (272 Kg)  
Dimensions:  
Magnet:(L) 250, (W) 46, (D) 25 mm  
Armature Plate:(L) 185, (W) 38, (D) 12 mm  
Mounting Plate:(L) 250, (W) 25, (D) 5 mm  
Finishes for magnet and armature plate: Zinc  
Epoxy Potting Compound: E87252 (S), UL94V-0  
Weight (Approx.): 2.0 Kg  
After the electromagnet  
firmly assembled with the  
mounting plate, use the  
screws to fasten the lock on  
the site permanently.  
GIANNI INDUSTRIES, INC.  
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,  
Tu-Cheng City, Taipei, Taiwan 23678  
The products are manufactured under an ISO  
9001  
&
QC 080000 Certified Quality  
Management Program environment back its  
product quality, performance and commitment  
to customer satisfaction.  
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876  
Website: gianni.tw  
Copyright 2008 Gianni industries, inc. All rights reserved.  
DM-CA-EM-NH300 Ver. D Published on 2008.08.18  
 

ELAN Home Systems Speaker PSP6 User Manual
Extron electronic Switch Ultra Series User Manual
Ford Automobile 2010 Flex User Manual
Frigidaire Oven Gas Oven User Manual
Fujitsu Carrying Case 130 User Manual
Furuno Battery Charger BC 6158 User Manual
Garland Oven SUMG100D1 User Manual
GE Monogram Switch Zenith Controls User Manual
GE Ventilation Hood PVB98SN User Manual
Global Machinery Company Drill GTX18250 User Manual