Gefen Network Card GTV DIGAUD 2 AAUD User Manual

Digital Audio  
to Analog Adapter  
GTV-DIGAUD-2-AAUD  
User Manual  
gefentv.com  
 
ASKING FOR ASSISTANCE  
Technical Support:  
Telephone  
(818) 772-9100  
(800) 545-6900  
Fax  
(818) 772-9120  
Technical Support Hours:  
8:00 AM to 5:00 PM Monday through Friday, Pacic Time  
Write To:  
Gefen LLC  
c/o Customer Service  
20600 Nordhoff St  
Chatsworth, CA 91311  
Notice  
Gefen LLC reserves the right to make changes in the hardware, packaging and  
any accompanying documentation without prior written notice.  
Digital Audio to Analog Adapter is a trademark of Gefen LLC  
© 2012 Gefen, LLC. All rights reserved.  
All trademarks are the property of their respective owners.  
Rev A2  
 
CONTENTS  
1
2
3
4
5
6
6
7
8
9
Introduction  
Operation Notes  
Features  
Panel Layout  
Panel Descriptions  
Connection the Digital Audio to Analog Adapter  
Wiring Diagram  
Operating the Digital Audio to Analog Adapter  
Specifications  
Warranty  
 
INTRODUCTION  
Congratulations on your purchase of the GefenTV Digital Audio to Analog  
Adapter. Your complete satisfaction is very important to us.  
GefenTV  
GefenTV is a unique product line catering to the growing needs for innovative  
home theater solutions. We specialize in total integration for your home theater,  
while also focusing on going above and beyond customer expectations to ensure  
you get the most from your hardware. We invite you to explore our distinct  
product line and hope you nd your solutions.  
The GefenTV Digital Audio to Analog Adapter  
The Digital To Analog Audio converter box takes your coaxial/optical (S/PDIF or  
TOSLink) digital audio source and converts it to standard analog left/right audio,  
available for connection to an external device such as an amplier or recording  
deck via standard RCA-style jacks. Now you can bridge your legacy sound  
system with digital sources such as DVD and CD players that don’t have RCA-  
style analog outputs.  
How It Works  
Simply run a short extension cable from an available digital audio output jack on  
your digital source device to the same type of digital input on the Converter.  
Select which kind of digital signal (coaxial or optical) is being input with the  
selector switch on the converter, then hook up your analog RCA-style left and  
right cables to the Converter’s analog RCA jack outputs and power up all  
equipment. That’s all there is to it!  
1
 
OPERATION NOTES  
THIS PAGE LEFT INTENTIONALLY BLANK  
2
 
FEATURES  
Features  
Converts S/PDIF or TOSLink digital audio signals to analog L/R audio  
Digital interpolation lter and digital-to-analog converter (DAC)  
Accepts uncompressed digital audio as input  
Samples at 32, 44.1, 48 and 96 KHz  
2-channel LPCM (Linear Pulse Code Modulation)  
24-bit S/PDIF incoming bitstream on left and right channels  
Compact and easy to install  
Package Includes  
(1) Digital Audio to Analog Adapter  
(1) 3 ft. Optical cable  
(1) 5V DC Power Supply  
(1) Quick Start Guide  
3
 
PANEL LAYOUT  
Top  
1
Front  
Back  
Side  
2
3
4
5
7
6
4
 
PANEL DESCRIPTIONS  
1
Power Indicator  
This LED indicator will glow bright red once the included 5V DC power  
supply has been connected between the Digital Audio to Analog Adapter  
and an available electrical outlet.  
2
3
Out L  
Connect an RCA cable from this port to the left channel input of the A/V  
device.  
Out R  
Connect an RCA cable from this port to the right channel input of the A/V  
device.  
4
5
In Coax  
Connect a coax cable from the digital audio source to this S/PDIF port.  
Optical  
Connect an optical cable from the digital audio source to this  
TOSLINK™ port.  
6
7
Optical / Coax  
Use this slider switch to select between the Optical input or the Coax  
input on the Digital Audio to Analog Adapter.  
DC 5V  
Connect the included power supply to this power receptacle.  
5
 
CONNECTING THE  
DIGITAL AUDIO TO ANALOG ADAPTER  
How to Connect the Digital Audio to Analog Adapter  
1. Connect an Optical and/or Coax cable from the audio source(s) to the Digital  
Audio to Analog Adapter.  
IMPORTANT: Before connecting the included optical cable between  
the audio source and the Digital Audio to Analog Adapter, be sure  
to remove the clear plastic protective cover on both end of the  
TOSLINK™ connectors as shown in the photos below. Use your  
thumb and index nger to pinch the protective cover, then gently pull  
to remove the cover from the TOSLINK™ connector.  
2. Connect a set of L/R analog RCA-type audio cables from the Audio L/R  
output of the Digital Audio to Analog Adapter to the inputs of the A/V  
equipment.  
3. Connect the included 5V DC power supply to the power receptacle on the  
Digital Audio to Analog Adapter and connect the AC adapter to an available  
electrical outlet  
Wiring Diagram for the Digital Audio to Analog Adapter  
L/R RCA ANALOG AUDIO CABLE  
SPDIF OR TOSLINK DIGITAL AUDIO CABLE  
Audio Source  
Converter  
Audio Receiver  
GTV-DIGAUD-2-AAUD  
6
 
OPERATING THE  
DIGITAL AUDIO TO ANALOG ADAPTER  
Switching between Optical and Coax  
Switching to the Optical (TOSLINK™) input  
Slide the Optical / Coax switch to the far left as shown in the photo below:  
Switching to the Coax (S/PDIF™) input  
Slide the Optical / Coax switch to the far right, as shown below:  
7
 
SPECIFICATIONS  
Digital Audio Inputs...................................................... (1) TOSLINK™, (1) S/PDIF  
Analog Audio Outputs ................................................................ (1) L+R RCA-type  
Distortion................................................................................... < 0.001% @ 1 kHz  
SNR............................................................. > 90 dB (20 Hz - 20 kHz, A-weighted)  
Power Supply......................................................................................... 5V /1A DC  
Power Consumption................................................................................5W (max.)  
Operating Temperature......................................................................... 0 to +70° C  
Dimensions (W x H x D) ......................1.8’’ x 0.9’’ x 1.8’’ (46mm x 22mm x 46mm)  
Shipping Weight ............................................................................... 1 lbs. (0.5 kg)  
8
 
WARRANTY  
Gefen warrants the equipment it manufactures to be free from defects in material  
and workmanship.  
If equipment fails because of such defects and Gefen is notied within two (2)  
years from the date of shipment, Gefen will, at its option, repair or replace the  
equipment, provided that the equipment has not been subjected to mechanical,  
electrical, or other abuse or modications. Equipment that fails under conditions  
other than those covered will be repaired at the current price of parts and labor in  
effect at the time of repair. Such repairs are warranted for ninety (90) days from  
the day of reshipment to the Buyer.  
This warranty is in lieu of all other warranties expressed or implied, including  
without limitation, any implied warranty or merchantability or tness for any  
particular purpose, all of which are expressly disclaimed.  
1. Proof of sale may be required in order to claim warranty.  
2. Customers outside the US are responsible for shipping charges to and from  
Gefen.  
3. Copper cables are limited to a 30 day warranty and cables must be in their  
original condition.  
The information in this manual has been carefully checked and is believed to  
be accurate. However, Gefen assumes no responsibility for any inaccuracies  
that may be contained in this manual. In no event will Gefen be liable for  
direct, indirect, special, incidental, or consequential damages resulting from  
any defect or omission in this manual, even if advised of the possibility of such  
damages. The technical information contained herein regarding the features and  
specications is subject to change without notice.  
For the latest warranty coverage information, refer to the Warranty and Return  
PRODUCT REGISTRATION  
Please register your product online by visiting the Register Product page  
under the Support section of the Gefen Web site.  
9
 
 
 
Rev A2  
20600 Nordhoff St., Chatsworth CA 91311  
1-800-545-6900 818-772-9100 fax: 818-772-9120  
Pb  
This product uses UL or CE listed power supplies.  
 

Eclipse Fujitsu Ten Car Stereo System AVN 30D User Manual
Eiki Projector 3870A User Manual
Electro Voice Speaker System EVID 121P User Manual
Fagor America Electric Pressure Cooker Rapida User Manual
Fujitsu Printer FTP 632MCL301 User Manual
FUNAI CRT Television F4819CUS User Manual
Gaggia Coffee Grinder Baby User Manual
Gardena Water Pump 5000 S User Manual
GE Oven JKS06 User Manual
Gigabyte Laptop Q2532 User Manual