Fujitsu Printer FTP 638MCL101 User Manual

BATTERY DRIVE, FTP-608 Series  
3" HIGH SPEED THERMAL PRINTER  
FTP-638MCL101/103, Easy Loading Method  
OVERVIEW  
The easy loading FTP-608 MCL Series is ultra compact high  
speed, battery driven thermal printer, printing 3-inch wide  
paper (80mm) where platens are removable. Our original  
platen removal mechanism improved paper loading and  
maintenance.  
The FTP-608 MCL series can be used for a variety of  
applications, such as portable terminals, POS, ticket issuing  
terminals, label printers, banking terminals, and  
measurement and medical equipment.  
HIGHLIGHTS  
• Easy loading type  
Our original platen removal mechanism improved paper  
loading and maintenance.  
• Ultra compact  
Height 15.5 mm, width 92.3mm, depth 33.0 mm for the 3  
inch model.  
High speed printing  
It can print at 60 mm/s (480 dotlines/s) maximum by using  
Fujitsu's unique head drive control.  
• High resolution printing  
8 dots/mm of resolution printing is possible.  
1
 
FTP-638MCL101/103  
SPECIFICATIONS  
Specification  
Item  
FTP-638MCL101/103  
Interface  
Conforms to RS232C / Centronics  
4.2 VDC to 8.5 V, average current 1.37A (1.53) peak value  
Printing ratio: 12.5%, printing speed 50mm/sec., 7.2 V  
For print head  
Operating  
For motor  
4.2 VDC to 8.5 V, 1 A maximum  
2.7 to 5.25 VDC, 0.1 A maximum  
92.3 x 33.0 x 15.5 mm (WxDxH)  
69.3 x 52.0 x 15.0 mm (WxDxH)  
Approximately 52g  
Voltage  
For logic  
Printer mechanism  
Interface board  
Printer mechanism  
Interface board  
Dimensions  
Weight  
Approximately 20g  
Pulse resistance: 100 million pulses/dot (under our  
standard conditions). Abrasion resistance: paper traveling  
distance 50km (print ratio: 25% or less)  
Head life  
Operating temperature*  
Operating humidity  
Storage temperature  
Storage humidity  
0˚ C to +50˚ C  
20 to 85% RH (no condensation)  
-20˚ C to +60˚ C (paper not included)  
5 to 95% RH (no condensation)  
Operating  
environment  
Head temperature  
detection  
Detected by thermistor  
Detection  
function  
Paper out/mark detection Detected by photo-interrupter  
High sensitive paper:  
TF50KS-E4 (Nippon Paper)  
TK50KS-E (Nippon Paper)  
PD150R (Oji Paper)  
Standard paper:  
FTP-030P0701 (80mm)  
TK60KS-F1 (Nippon Paper)  
PD170R (Oji Paper)  
AFP220VBB-1 (Mitsubishi)  
FTP-030P0102 (80mm)  
Recommended thermal sensitive paper  
Medium life storage paper:  
Long life storage paper:  
PD160R-N (Oji Paper)  
AFP-235 (Mitsubishi Paper)  
TP50KJ-R (Nippon Paper)  
HA220AA (Nippon Paper)  
*+5˚C to +40˚C printing density assurance rance (-25 to 70˚C capability)  
3
 
FTP-638MCL101/103  
FUNCTION  
Item  
Item  
8. Motor power saving function  
9. Mark detection function  
1. Test print function  
2. Paper out detection  
3. Paper near end detection  
4. Platen open detect  
10. MCU operation abnormality detection  
11. Power ON/OFF sequence protection  
Thermal head temperature abnormality  
detection  
5.  
12. Motor over-current protection  
13. Hardware timer  
6. Blow-out fuse detection  
7. Head voltage abnormality detection  
4
 
FTP-638MCL101/103  
DIMENSIONS  
1. Printer mechanism: 3 inch  
FTP-638MCL101  
FTP-638MCL103  
center of paper  
center of paper  
87.8  
80.0  
80.
0  
35(paper end sensor)  
35(paper end sensor)  
10.7  
10.7  
15.5  
15.5  
4.6  
44.7  
4.6  
44.7  
84.2  
86.7  
87.6±0.1  
84.2  
86.7  
87.6±0.1  
Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified).  
Unit: mm  
2. Dimension listed in ( ) is for reference  
2. Interface board  
Unit: mm  
5
 
FTP-638MCL101/103  
FTP-638 MCL101/103  
Thermal head, control circuit side connector: 5597-21CPB Molex or equivalent product  
No  
1
Signal  
I/O Contents  
PHK  
I
Cathode for photo interruptor  
2
VSEN  
PHE  
Paper sensor power  
3
O
Emittor for photo interruptor  
4
N.C. (101)/ SW1 (103) —/O Platen release switch  
N.C. (101)/ SW2 (103) —/I Platen release switch  
5
6
VH  
VH  
DI  
I
Head drive power  
7
8
Data in  
9
CLK  
I
Synchronous clock for communication  
10 GND  
11 GND  
12 STB5  
13 STB4  
14 STB3  
15 VDD  
16 TM  
I
Ground power supply for thermal head  
Thermal head energizing control signal  
I
I
I
Logic power  
O
I
Thermally sensitive resistor input termnial 1  
17 STB2  
18 STB1  
19 AEO2  
20 AEO1  
21 GND  
22 GND  
23 LAT  
24 DO  
Thermal head energizing control signal  
---  
I
I
I
I
Ground power supply for thermal head  
Data latch  
Data out  
O
I
25 VH  
Power supply for thermal head  
26 VH  
I
27 MT/A  
28 MT/A  
29 MT/B  
30 MT/B  
I
I
Stepping motor excitation signal  
I
I
6
 
FTP-638MCL101/103  
Europe  
Japan  
Fujitsu Components Europe B.V.  
Diamantlaan 25  
2132 WV Hoofddorp  
Netherlands  
Fujitsu Component Limited  
Gotanda-Chuo Building  
3-5, Higashigotanda 2-chome, Shinagawa-ku  
Tokyo 141, Japan  
Fujitsu Components  
International  
Headquarter  
Offices  
Tel: (31-23) 5560910  
Fax: (31-23) 5560950  
Tel: (81-3) 5449-7010  
Fax: (81-3) 5449-2626  
Asia Pacific  
North and South America  
Fujitsu Components America, Inc.  
250 E. Caribbean Drive  
Sunnyvale, CA 94089 U.S.A.  
Tel: (1-408) 745-4900  
Fujitsu Components Asia Ltd.  
102E Pasir Panjang Road  
#04-01 Citilink Warehouse Complex  
Singapore 118529  
Tel: (65) 6375-8560  
Fax: (1-408) 745-4970  
Fax: (65) 6273-3021  
© 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered  
trademarks of their respective owners. Rev. 11/15/2004.  
7
 

Edelbrock Automobile Parts 9629 User Manual
Extron electronic Stereo Amplifier P 2 DA2 MT User Manual
Extron electronic Stereo System RGB 109XI User Manual
Fender DJ Equipment PX 2208 User Manual
FujiFilm Computer Monitor BB10768 3011 User Manual
FujiFilm Digital Camera Z5fd User Manual
Generac Power Systems Portable Generator QT018 User Manual
GE Range ZGU364LRPSS User Manual
GE Water Heater AP13787 User Manual
GMC Automobile Envoy XUV User Manual