Fujitsu Printer FTP 634MCL001 User Manual

BATTERY DRIVE, FTP-604 Series  
3” TYPE MECHANISM AND INTERFACE BOARD  
FTP-634MCL001/002/FTP-624DCL/DSL002  
OVERVIEW  
FTP-634MCL/FTP-624DCL/DSL Series is a high speed line  
thermal printer driven by battery, printing on 3-inch wide paper  
(80 mm/ 85 mm).  
The printer is compact and lightweight, and the design allows  
easy  
head maintenance, head cleaning and head  
replacement.  
This printer is suitable for a variety of applications, such as  
hand held terminals, POS terminals, ticket machines, coupon  
machines, label printers, etc.  
FTP-634MCL001  
HIGHLIGHTS  
• High speed printing  
It can print at 50 mm/s (400 dotlines/s) maximum by using  
Fujitsu Components' unique head drive control.  
• Compact and lightweight  
This printer has a low profile of only 20 mm, and a light  
weight of approximately 95g.  
FTP-624CU102  
• Low power consumption  
The peak current for head drive is only 3.5 A (8.5 VDC, 128  
dots on).  
• Easy head access  
It is designed for easy head cleaning and head replacement.  
• Paper auto loading function  
Thermal paper can be loaded without head-up lever  
operation.  
• UL recognized  
File No. E171434  
FTP-624DCL/DSL002  
1
 
FTP-634MCL001/002/FTP-624DCL/DSL002  
(Continued)  
Item  
For head  
Specifications  
Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries)  
Peak current: approx. 3.5 A (conditions: room temp., 7.2VDC, 128 dots on)  
Power  
supply  
Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries)  
Peak current: approximately 0.8 A (conditions: room temperature, 7.2VDC)  
For motor  
For logic  
Voltage: 5 V DC± 5%  
Current: 0.2 A maximum  
Mechanism  
108 (W) × 46 (D) × 20 (H) mm (excluding lever and knob diameter)  
131 (W) × 89(D) × 24 (H) mm  
Dimensions  
Interface board  
Weight (Mechanism)  
approximately 95 g  
Expected life  
Mechanism  
Pulse durability: 1 × 108 pulse/dot (using Fujitsu Takamisawa's standard  
driving method)  
Wear resistance: 50 km (at 12.5% print ratio)  
Operating temperature  
0 to +50°C*2  
Environmental  
conditions  
Operating humidity  
Storage temperature  
Storage humidity  
Head temperature  
Paper out/Mark detect  
Head-up  
20 to 85% RH (no condensation)  
–20 to +60°C  
5 to 95% RH (no condensation)  
By thermistor (applied energy control, abnormal temperature detection)  
By photointerrupter  
Detection  
By microswitch  
For front insertion use (80 mm width) : FTP-030PU001  
For rear insertion use (85 mm width) : FTP-030P0020, FTP-030PG106  
In Europe (80 mm width)  
· Oji Paper  
· NIPPON Paper  
· MITSUBISHI Paper Mills  
: FTP031P0060-45  
Recommended thermal sensitive paper  
: PD160R, PD170R, PD150R  
: TF50KS-E4, TF60KS-E, TF50KS-E  
: P220VBB-1, AFP-235  
*1: There may be exceptions.  
*2: Guarantee +5°C to +40°C.  
3
 
FTP-634MCL001/002/FTP-624DCL/DSL002  
DIMENSIONS  
Printer mechanism  
PAPER INSERTION  
(MCLOO1)  
20.1  
HEAD UP LEVER (AT HEAD DOWN)  
CENTER OF PAPER  
PAPER INSERTION  
(MCLOO2)  
HEAD CONNECTOR  
50.9  
57.0±1  
(107.9)  
Unit: mm  
4
 
FTP-634MCL001/002/FTP-624DCL/DSL002  
Interface board  
130.8  
120.7  
105.4  
71.1  
33.0  
5.1  
5.1  
15.2  
CN5  
CN12  
CN9  
CN10  
CN11  
59.7  
CN2  
CN1  
CN4  
5.1  
5.1  
73.7  
4-03.6  
86.4  
105.4  
114.2  
120.7  
Mounting Height  
Mounting Height  
* CN9 on FTP-624DSL only  
** CN8, CN11, CN12 not used  
Unit: mm  
5
 
FTP-634MCL001/002/FTP-624DCL/DSL002  
CONNECTOR PIN ASSIGNMENT FOR PRINTER MECHANISM  
1. Thermal Head  
Head side 1: B11B-PH-K-S-2.2 (J.S.T.) or equivalent  
2: B10B-PH-K-S-2.2 (J.S.T.) or equivalent  
Board side 1: PHR-11 (J.S.T.) or equivalent  
2: PHR-12 (J.S.T.) or equivalent  
Connector Thermal Head 1  
No. Signal Comment  
Connector Thermal Head 2  
No. Signal Comment  
1
2
STB5 Print enable signal 5  
STB6 Print enable signal 6  
STB7 Print enable signal 7  
STB8 Print enable signal 8  
1
2
VH  
VH  
Power for head  
Power for head  
3
3
GND Head ground  
GND Head ground  
4
4
5
CLK  
LAT  
DIN  
Data transmission clock  
Print data latching signal  
Print data output signal  
5
TH*1  
Temperature detection  
6
6
STB1 Print enable signal 1  
STB2 Print enable signal 2  
STB3 Print enable signal 3  
STB4 Print enable signal 4  
VDD Power for logic  
7
7
8
GND Head ground  
GND Head ground  
8
9
9
10  
11  
VH  
VH  
Power for head  
Power for head  
10  
*1: Symbol: " " means a negative logic signal  
Thermal head heat sink  
Head up level  
Motor  
1, 2, 3, ...............9, 10  
1, 2, 3, ...............10, 11  
Connector Pin No.  
3. Sensor connectors  
Sensor  
: PHR-5 (J.S.T.) or equivalent  
Board side : B5B-PH-K-S (J.S.T.) or equivalent  
6
 
FTP-634MCL001/002/FTP-624DCL/DSL002  
FUNCTION  
Item  
Item  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
Test print function  
8.  
9.  
Motor power saving function  
Mark detection function  
Paper out detection  
Paper near end detection  
10. MCU operation abnormality detection  
11. Power ON/OFF sequence protection  
12. Motor over-current protection  
13. Hardware timer  
Head up detection  
Thermal head temperature abnormality detection  
Blow-out fuse detection  
Head voltage abnormality detection  
INTERFACE, COMMAND, OPTIONS  
Please refer to the FTP-624DCL/DSL DATA SHEET.  
Europe  
Japan  
Fujitsu Components Europe B.V.  
Diamantlaan 25  
Fujitsu Component Limited  
Gotanda-Chuo Building  
2132 WV Hoofddorp  
Netherlands  
Tel: (31-23) 5560910  
Fax: (31-23) 5560950  
3-5, Higashigotanda 2-chome, Shinagawa-ku  
Tokyo 141, Japan  
Tel: (81-3) 5449-7010  
Fax: (81-3) 5449-2626  
Fujitsu Components  
International  
Headquarter  
Offices  
Asia Pacific  
North and South America  
Fujitsu Components America, Inc.  
250 E. Caribbean Drive  
Sunnyvale, CA 94089 U.S.A.  
Tel: (1-408) 745-4900  
Fujitsu Components Asia Ltd.  
102E Pasir Panjang Road  
#04-01 Citilink Warehouse Complex  
Singapore 118529  
Tel: (65) 6375-8560  
Fax: (1-408) 745-4970  
Fax: (65) 6273-3021  
© 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered  
trademarks of their respective owners. Rev. 06/2002  
7
 

Eiki Projector LC SB22 User Manual
Ericsson Home Theater System RX8310 User Manual
Fisher Price Motorized Toy Car K9758 User Manual
Fostex DVR D2424LVMKII User Manual
Frigidaire Cooktop FGGC3645K User Manual
Frigidaire Refrigerator FFSC2323LE User Manual
Gaggenau Electric Steamer VK230610 User Manual
GE Double Oven JBP89DM User Manual
Global Machinery Company Impact Driver IW1000 User Manual
GN Netcom Corded Headset GN 2000 User Manual