Fujitsu Printer FTP 607 Series User Manual

24v driveN, FTP-607 Series  
2” HiGH SPeed THerMaL PriNTer  
FTP-627MCL401/601  
n Overview  
The FTP-627 MCL Series are 24V driven high-speed printers  
with a ultra low profile auto cutter and long life.  
The FTP-627 MCL Series can be used for a variety of  
applications, such as POS terminals, ticket vending machines,  
label printers, banking terminals, and measurement and  
medical equipment.  
n HiGHLiGHTS  
FTP-627MCL401/601  
• Ultra low profile  
Height 21.8 mm, width 81.2 mm, depth 42.2 mm  
• High speed printing  
It can print at 100/150 mm/s (800/1,200 dotlines/s)  
maximum by using Fujitsu's unique head drive control.  
• Auto Cutter  
Long life and high reliable guilotine with dedicated motor.  
• Easy paper setting  
Our lever platen release mechanism allows a  
wide paper route, so paper can be easily inserted.  
Conventional auto loading is also available.  
FTP-627DSL291R  
• Multifunctional die-cast frame  
Wide operating temperature range, long continuous  
printing, high ESD absorbtion and discharge of static  
electricity vibration and shock resistant.  
• RoHS compliant  
FTP-627DSL601R  
 
FTP-627MCL401/601  
n SPeCiFiCaTiONS  
Item  
Specification  
Iterface  
Conforms to RS232C/Centronics / USB  
Power supply For print head MCL401  
24 VDC average current, 0.4A (0.9 A peak)  
(print ratio: 12.5%, print speed 100mm/sec.)  
MCL601  
24 VDC average current 0.5 A (0.9 A peak)  
24 VDC ±5%, 1 A maximum  
For motor  
For cutter  
For logic  
MCL401  
MCL601  
MCL401  
MCL601  
24 VDC ±5%, 1.1 A maximum  
24 VDC ±5%, 1 A maximum  
24 VDC ±5%, 1.3 A maximum  
3.3 to 5.25 VDC, 0.1 A maximum  
81.2 x 42.2 x 21.8 mm (WxDxH)  
70 x 60 x 12 mm (WxDxH)  
Dimensions  
Mechanism with cutter  
Interface  
board  
DSL291  
DSL6xx  
95 x 70 x 21.6 mm (WxDxH)  
Weight  
Mechanism with cutter  
Interface board  
Approximately 100g  
Approximately 50g  
Life  
Head  
MCL401  
Pulse durability: 50 million pulses/dot (print ratio: 25%).  
Pulse durability: 100 million pulses/dot (print ratio: 25%).  
Abrasion resistance: paper traveling distance 50km  
Abrasion resistance: paper traveling distance 100km  
500,000 cuts  
MCL601  
MCL401  
MCL601  
MCL401  
MCL601  
Cutter  
Platen  
1,000,000 cuts  
5,000 times (open/close)  
Operating  
environment  
Operating temperature*  
Operating humidity  
Storage temperature  
Storage humidity  
0ºC to +50ºC  
20 to 85% RH (no condensation)  
-20ºC to +60ºC (paper not included)  
5 to 95% RH (no condensation)  
Detected by thermistor  
Detection  
function  
Head temperature  
detection  
Paper out/mark  
detection  
Detected by photo-interruptor  
Platen release  
Detected by sliding switch  
Recommended thermal sensitive paper  
High sensitive paper  
Standard paper  
TF50KS-E4 (Nippon paper)  
TF60KS-E (Nippon paper),  
FTP-020PU001 (58mm)  
PD150R (Oji paper)  
FTP-020PU701 (58mm)  
Medium life storage  
TF60KS-F1 (Nippon paper)  
FTP-020P0102 (58mm)  
PD170R (Oji paper)  
paper  
P220VBB-1 (Mitsubishi paper)  
Long life storage  
PD160R (Oji paper)  
paper  
AFP-235 (Mitsubishi paper)  
TP50KJ-R (Nippon paper)  
HA220AA (Nippon paper)  
*+5˚C to +40˚C printing density assurance rance.  
 
FTP-627MCL401/601  
n FuNCTiON OF iNTerFaCe bOard  
Item  
Item  
1.  
2.  
3.  
4.  
5.  
Test print function  
8.  
Cutter trouble detect  
Paper out detection  
Paper near end detection  
Paten open detection  
9.  
Motor power saving function  
Mark detection function  
10.  
11.  
12.  
MCU operation abnormality detection  
Power ON/OFF sequence protection  
Thermal head temperature abnormality  
detection  
6.  
7.  
Blow-out fuse detection  
13.  
14.  
Motor over-current protection  
Hardware timer  
Head voltage abnormality detection  
n diMeNSiONS  
1. Printer mechanism  
FTP-627MCL401/601  
68.4  
25  
21.8  
7.5  
44  
60  
81.2  
ꢀꢀ°  
44  
10.7  
Unit: mm  
Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified).  
2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is  
open.  
4
 
FTP-627MCL401/601  
2. Interface board FTP-627DSL291R  
(70.0)  
63.5  
3.25  
3.25  
50.5  
25.5  
1.45  
24  
8
CNꢁ  
CN4  
FG¯3.2  
CN7  
3ѯ3.2  
CN6  
CN2  
8
6
17.5  
1.25  
34.5  
49.5  
Note: all dimensions are nominal value  
() means just reference  
The mounting height is the max.  
Unit: mm  
5
 
FTP-627MCL401/601  
n iNTerFaCe bOard FTP-627dSL601 Series  
Connectors on Control Board  
Name  
Functions  
Remarks  
Note  
CNꢀ +24V power supply connector Connection for +24V power supply  
CN2 RS-232C  
Connection for serial interface  
Connection for USB interface  
CNꢁ USB I/F connector  
CN4  
-
Connection for thermal head + paper feed motor 2-inch, 30 pin  
Connection for paper cutter  
CN5 Cutter connector  
CN6 Operation panel connector  
CN7 Near end sensor connector  
Connection for operation panel  
Connection for near end switch  
-
*ꢀ  
*2  
CN8  
-
CN9 Logic power connector  
CN10 Head/motor connector  
Connection for +5V power Supply  
Connection for thermal head & paper feed motor 2-inch, 24 pin  
Note: *1: Option  
*2: Depends on specification  
6
 
FTP-627MCL401/601  
FTP-627MCL401  
1. Connector (FPC) specification (CN3/CN10)  
(1) Connector  
Mechanical unit side:  
FPC connector  
Remote side (housing site):  
52610-2471 (made by Molex)  
(2) Pin assignment on the mechanical side  
Signal  
PHK  
I/ O Contents  
No  
1
I
Photointerrupter (Cathode)  
2
VSEN  
PHE  
VH  
Ground power supply for paper sensor  
Photointerrupter (Emittor)  
Head drive power  
Data input  
3
O
I
4
5
DI  
I
6
STB2  
STB3  
VDD  
GND  
I
Print enable signal 2  
Print enable signal 3  
Logic Power  
7
I
8
I
9
O
I
Head ground  
10 GND  
11 GND  
12 TH  
Head ground  
Head ground  
Thermistor  
13 STB1  
14 LAT  
15 CLK  
16 VH  
Print enable signal 1  
Data Latch  
I
I
Clock  
I
Head drive power  
Head drive power  
Platen open switch  
Platen open switch  
Motor excite signal A  
Motor excite signal A  
Motor excite signal B  
Motor excite signal B  
Not connected  
17 VH  
I
18 SW  
19 SW  
20 MT A  
21 MT A  
22 MT B  
23 MT B  
24 NC  
I
I
I
I
7
 
FTP-627MCL401/601  
FTP-627MCL601  
1. Connector (FPC) specification (CN4)  
(1) Connector  
Mechanical unit side:  
Remote side (housing site):  
FPC connector  
52610-3071 (made by Molex)  
(2) Pin assignment on the mechanical side  
No.  
Symbol  
PHK  
VSEN  
PHE  
VH  
Signal Name  
Cathode for photo interrupter  
Paper sensor power  
Emitter for photo interrupter  
Head drive power  
Head drive power  
Head drive power  
Data in  
2
4
5
VH  
6
VH  
7
DI  
8
STB2  
STB3  
Vdd  
Strobe 2  
9
Strobe 3  
10  
ꢀꢀ  
ꢀ2  
ꢀꢁ  
ꢀ4  
15  
ꢀ6  
ꢀ7  
18  
19  
20  
2ꢀ  
22  
2ꢁ  
24  
25  
26  
27  
28  
29  
30  
Logic power  
GND  
GND  
GND  
GND  
GND  
GND  
TM  
Head ground  
Head ground  
Head ground  
Head ground  
Head ground  
Head ground  
Thermistor  
NC  
NC  
STB1  
LAT  
Strobe 1  
Data latch  
CLK  
VH  
Clock  
Head drive power  
Head drive power  
Head drive power  
Platen switch  
Platen switch  
Excitation signal A  
Excitation signal A  
Excitation signal B  
Excitation signal B  
VH  
VH  
SW  
SW  
MT A  
MT A  
MT B  
MT B  
8
 
FTP-627MCL401/601  
Sensor (Photo-  
interruptor)  
Platen unit  
Thermal head  
Motor  
FPC  
Connect terminal:  
surface side  
Connector No  
24, 23, .....................2,1  
(FPC pin numbers)  
2. Cutter (CN4/CN5)  
Connector on control circuit side: 52610-0871 Molex or equivalent  
No. Signal I/O  
Contents  
No. Signal I/O  
Contents  
1
3
5
7
VSEN  
PHK  
I
O
I
Paper sensor power  
Photo interruptor (cathode)  
Motor excite signal A  
Motor excite signal B  
2
4
6
8
PHE  
MT A  
MT B  
NC  
O
I
Photo interruptor (emittor)  
Motor excite signal A  
Motor excite signal B  
Not connected  
MT A  
MT B  
I
I
Fujitsu Components International Headquarter Offices  
Japan  
Europe  
Fujitsu Component Limited  
Gotanda-Chuo Building  
3-5, Higashigotanda 2-chome, Shinagawa-ku  
Tokyo 141, Japan  
Fujitsu Components Europe B.V.  
Diamantlaan 25  
2132 WV Hoofddorp  
Netherlands  
Tel: (81-3) 5449-7010  
Fax: (81-3) 5449-2626  
Tel: (31-23) 5560910  
Fax: (31-23) 5560950  
Web: emea.fujitsu.com/components/  
North and South America  
Fujitsu Components America, Inc.  
250 E. Caribbean Drive  
Sunnyvale, CA 94089 U.S.A.  
Tel: (1-408) 745-4900  
Asia Pacific  
Fujitsu Components Asia Ltd.  
102E Pasir Panjang Road  
#01-01 Citilink Warehouse Complex  
Singapore 118529  
Fax: (1-408) 745-4970  
Tel: (65) 6375-8560  
Fax: (65) 6273-3021  
©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective  
owners.  
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our  
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.  
Rev. November 6, 2008.  
9
 

Echo Pole Saw PPT 2100 2400 User Manual
Ei Electronics Smoke Alarm Ei 407 User Manual
Exakta Digital Camera VX IIa User Manual
Extron electronic Stereo Amplifier P 2 DA8 A User Manual
Garmin Laptop Laptop User Manual
Gateway Personal Computer MAN FX510 User Manual
GE Dishwasher GHD3500 Series GSD3400 Series GSD3600 Series GSD3700 Series GSD3900 Series User Manual
Generac Power Systems Switch 5464 User Manual
Genesis Advanced Technologies Speaker S4 8 User Manual
GE Ventilation Hood ZV750 User Manual