Fisher Price Fitness Equipment 72408 User Manual

Consumer Information  
®
Questions? We’d like to hear from you!  
Call Fisher-Price® Consumer Relations, toll-free at 1-800-432-KIDS (5437), 8 AM - 6 PM EST Monday through Friday.  
Hearing-impaired consumers using TTY/TDD equipment, please call 1-800-382-7470.  
Grow to Pro Basketball  
Model Numbers: 72408, H5556  
Or, write to:  
Fisher-Price® Consumer Relations  
636 Girard Avenue  
East Aurora, New York 14052, U.S.A.  
For countries outside the United States:  
CANADA  
Product features and decoration may vary from the photograph above.  
Questions? 1-800-567-7724, Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.  
GREAT BRITAIN  
Please keep this instruction sheet for future reference, as it contains important information.  
Adult assembly is required.  
Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500302.  
AUSTRALIA  
Tool required for assembly: Phillips Screwdriver (not included).  
Water or sand to fill base (not included).  
Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.  
Consumer Advisory Service 1300 135 312.  
IMPORTANT! Rim height should be adjusted only by an adult.  
NEW ZEALAND  
16-18 William Pickering Drive, Albany 1331, Auckland.  
ASIA  
Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.  
© 2004 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.  
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.  
PRINTED IN MEXICO  
72408e-0920  
 
Assembly  
Assembly  
Rectangular Tab  
7
Rim  
11  
Collar  
9
5
PULL HERE  
®
-Price  
Fisher  
Upper Post  
4
Peg  
PRESS HERE  
Grooves  
Rim  
Lever  
Opening  
Hole  
5
6
Lower  
Post  
Peg  
Peg  
Top View  
• Move to the side of the assembly.  
Back View  
Note: The collar may already be factory assembled.  
• Place your foot on the base to hold it steady.  
• While holding the ring assembly and rim together,  
turn them over.  
• Press down firmly on the lower backboard while  
rotating the backboard up.  
• Align the lever on the side of the collar with the  
opening in the top of the lower post.  
• Insert four screws into the holes in the rim, making  
sure each hole in the rim is still aligned with each  
screw hole in the net assembly.  
• Partially tighten the screws with a Phillips screwdriver.  
Turn the rim over to ensure that the net loops are still  
in the grooves and through the ring tabs before  
completely tightening the screws. Do not over-tighten  
the screws.  
• When properly assembled, the pegs on the upper  
post rest in the grooves in the backboard, as shown.  
• Fit the collar onto the lower post, making sure the peg  
on each side of the collar snaps into the hole on each  
side of the post.  
• Hook the rectangular tab on each side of the rim to  
the upper post, as shown.  
• Rotate the rim down until it snaps into place on  
the upper post. Push down on the rim to be sure  
it is secure.  
Note: The height of the rim is three feet as assembled.  
Peg  
12  
10  
Wall  
Peg  
Backboard  
8
Fisher-Price®  
Rim  
Curved  
End  
6
Logo  
4
Lower Post  
4
Upper Post  
4
Holes  
5
Groove  
Rib  
5
Upper Post  
Peg  
5
6
Large Square Opening  
Base  
6
• If the lever comes off, simply re-attach it.  
6
• Insert the peg on one side of the lever into the hole in  
the collar.  
• Snap the other peg in the lever into the other hole in  
the collar.  
Base  
Groove  
Assembly is now complete.  
IMPORTANT! Assembly of the lower post is a  
permanent assembly.  
Please refer to assembly step 2 to fill the base with  
water or approximately 50 lbs. of sand (water and sand  
not included) to keep this product stationary.  
• Position the base as shown.  
• Lean the rim against a wall for support.  
• Position the upper post so that the straight end is  
down and the curved end is up and facing away from  
the base.  
• Locate the pegs on each side of the rim and the  
grooves on the backboard.  
• Position the backboard with the Fisher-Price® logo  
facing up.  
• Place your foot on the base to hold it steady and slide  
the backboard onto the upper post at an angle, as far  
as it will go.  
• Align the rib on the bottom of the lower post with the  
groove in the opening in the base.  
Hint: For easier assembly, apply liquid soap or rub a  
candle or bar soap around the bottom of the upper post  
(especially on the corners) and the inside of the large  
square opening. If assembling inside, place a tarp  
under the base to protect the floor surface.  
Hint: For easier assembly, apply a small amount of  
liquid soap around the bottom of the post. If assem-  
bling inside, place a tarp under the base to protect  
the floor surface.  
Note: There should be no gap between the upper post  
and the backboard.  
• Insert the lower post into the opening and push down,  
using a circular motion, until it snaps into place.  
• Insert the upper post into the large square opening in  
the base and, using a circular motion, push it all the  
way down.  
• Move the assembly away from the wall.  
4
5
 
Adjusting the Rim Height  
Care  
To clean, use a mild soap and water solution and  
clean cloth. Rinse clean with warm water to remove  
soap residue.  
IMPORTANT! Rim height should only be adjusted by an adult. Also, make sure children  
are not standing below the rim when adjusting the rim height.  
• Be sure to drain water from the base before  
extended storage. If water freezes in the base, it  
could cause damage.  
1
3
Backboard  
4
5
4
Slots  
• This toy includes an inflatable ball. If the ball becomes  
soft, inflate it with a standard, hand-operated air pump  
with a standard air needle.  
• The ball will contain the correct amount of air when its  
circumference measures 21 to 22 inches. Measure the  
circumference of the ball with a tape measure or with  
a piece of string cut 21 to 22 inches long. Do not over-  
inflate the ball.  
5
6
Upper Post  
Lower Post  
6
Lever  
Upper Post  
Base  
• As assembled, the rim height is three feet.  
To raise the rim height to four, five or six feet, place  
your foot on the base and pull up on the backboard  
with both hands to remove the upper post from  
the base. You may need to rock the upper post to  
loosen it from the base.  
• To lower the rim height: while holding the upper  
post, push the lever on the lower post down. Lower the  
upper post and push the lever into the slot at  
4' or 5'.  
• To raise the rim height: simply lift the upper post and  
push the lever into the slot at 5' or 6'.  
IMPORTANT! Since this may require a lot of force,  
make sure you are not standing with your face or  
chest above the backboard.  
2
4
5
Slots  
Upper Post  
6
Lever  
Lower Post  
Base  
• Pull the lever on the lower post down.  
• Insert the upper post into the lower post with the net  
positioned over the wheels on the base.  
• Push the lever into one of the slots on the side of the  
upper post at the desired height.  
6
7
 

Eiki Projector LC 120 User Manual
Excalibur electronic Games FX203 User Manual
Extron electronic Switch TLP VIM User Manual
Extron electronic Universal Remote RCP 2000 User Manual
Fostex Musical Instrument FD 4 User Manual
Friedrich Air Conditioner 9359944065 User Manual
Fujitsu Switch FS 102AT User Manual
GE Monogram Range ZDP48L6RHSS6 User Manual
GE Network Card superbus 2000 concord 4 gsm module User Manual
GOJO Indoor Furnishings FMX 12 User Manual