Electro Voice Nail Gun AB 34 User Manual

AB-34 / AB-64 Array Bracket System  
Assembly and Installation Instructions  
360° Array Bracket Kit  
AB-34 and AB-64 series kits feature a 4 sided powder  
coated steel mounting assembly that allows the mounting  
of 4 EVID speakers into a 360° pattern array configura-  
tion. The AB-34 works with the EVID 3.2 series and can  
be used with a threaded rod for suspension from the ceil-  
ing. The AB-64 is used with the EVID 4.2 or 6.2 series  
speakers and can be hung from the ceiling using a threaded  
rod or used with a speaker stand tripod as shown. The  
EVID’s can then be adjusted using the StrongArm Mount™  
to cover a variety of patterns to best serve the installation  
requirements. All assembly hardware is included.  
Evid 6.2/4.2 360° Array Bracket Kit Includes  
Evid 3.2 360° Array Bracket Kit Includes  
Item  
Qty.  
2
Description  
Array Bracket, Evid 6.2/4.2  
360° Array Adapter, Evid 6.2/4.2  
Screw, 1/4"-20 x .5"  
Item  
Qty.  
2
Description  
Array Bracket, Evid 3.2  
1
2
3
4
5
6
7
8
1
2
3
4
5
1
360° Array Adapter, Evid 3.2  
Screw, 1/4"-20 x .5"  
1
20  
20  
20  
20  
24  
24  
4
Flat Washer, (1/4" inside Dia.)  
Lock Nut, 1/4"-20  
Flat Washer, (1/4" inside Dia.)  
Lock Nut, 1/4"-20  
Flat Head Screw, 1/4"-20 x .5"  
Threaded Rod Adapter, Evid 6.2/4.2  
Pole Mount  
1
1
Ceiling Suspension (All Sizes)  
Step 1: Assemble Array Brackets  
Assemble the 2 Array Brackets (Item 1) using 4 Screws (Item 3), 4 Flat Washers (Item 4), and 4 Lock Nuts (Item 5) as  
shown in Figure 1.  
(Item 3)  
Screws  
(Item 5)  
Lock Nuts  
(Item 1)  
Array Brackets  
(Item 4)  
Flat Washers  
Figure 1  
 
Tripod Mounting (6.2/4.2 only)  
Step 1: Assemble Array Brackets  
(See Page 1.)  
Step 2: Assemble SAM’s to Array Bracket  
(See Page 2.)  
Step 3: Assemble Pole Mount to 360  
Array Adapter  
(Item 5)  
Lock Nuts  
Mount Pole Mount (Item 8) to the 360° Array  
Adapter (Item 7) using 4 Flat Head Screws (Item  
6), 4 Flat Washers (Item 4) and 4 Lock Nuts  
(Item 4)  
Flat  
Washers  
(Item 5) as shown in Figure 4.  
(Item 7)  
360 Array Adapter  
(Item 8)  
Pole Mount  
(Item 6)  
Flat Screws  
Figure 4  
Pole Mount Assembly  
 
3/8 Threaded Rod  
Threaded Rod Suspension  
Pole Mount  
Suspension Safety Warning  
This guide provides instruction on how to use EVID components to create example arrays. Correct use of this  
hardware is required for secure array construction. Only persons with the knowledge of proper hardware and safe  
suspension techniques should attempt to suspend any sound systems overhead. CAUTION! The weakest  
component determines the size and safety of the entire array. Before suspending any array always inspect all  
components of the array including building structural supports for cracks, deformations, corrosion or damage that  
could reduce strength and safety of the array.  
It is the responsibility of the user to ensure that any Electro-Voice loudspeaker system is suspended overhead in  
accordance with all current federal, state, and local regulations.  
© Telex Communications, Inc. 11/2001  
Part Number 38110-062 Rev A  
12000 Portland Avenue South, Burnsville, MN 55337  
Phone:952/884-4051, Fax:952/884-0043  
 

Dynex TV Cables DX AD113 User Manual
EdgeStar Washer Dryer sw5l40d User Manual
Electro Voice Speaker ND6x 16 User Manual
Estate Oven 3150250 User Manual
Everpure Water System EV9272 00 User Manual
Everpure Water System SSFM 100BC SYS User Manual
Flymo Trimmer Electric Lawn Mower User Manual
Frigidaire Microwave Oven FGMV173K User Manual
GE Air Conditioner AVX08 User Manual
Gefen Home Theater System Home Theater Scaler PLUS User Manual