Dynex Video Gaming Accessories DX CR6N1 User Manual

6-In-1 Memory Card  
Reader/Writer  
DX-CR6N1  
USER GUIDE  
 
Important safety instructions  
3
Features  
Your card reader features:  
A small, palm-sized form factor  
USB-powered operation (an external power adapter is not  
needed)  
USB 2.0 compliant  
USB mass storage device class compliant  
Supports the xD-Picture v1.2 specification  
Supports the SDHC (SD v2.0) 4-bit specification  
Supports the Memory Stick Pro-HG 8-bit specification  
Hot-swappable, Plug & Play capability  
Media card icons for easy drive recognition  
Important safety instructions  
Before getting started, read these instructions and save them for  
later reference:  
Before you plug your card reader into your computer, read  
this User Guide.  
Do not drop or hit your card reader.  
Do not install your card reader in a location that is subject  
to strong vibrations.  
Do not disassemble or try to modify your card reader.  
Disassembly or modification may void your warranty and  
could damage your card reader, leading to a fire or electric  
shock.  
Do not store your card reader in a damp location. Do not  
allow moisture or liquids to drip into your card reader.  
Liquids can damage your card reader, leading to a fire or  
electric shock.  
 
 
Card reader components  
4
Do not insert metal objects, such as coins or paper clips,  
into your card reader.  
Do not remove a card when the LED indicator shows data  
activity is in progress. You may damage the card or lose  
data stored on the card.  
Your card reader is for general computer use. Do not use  
your card reader in a computer that requires exceptional  
reliability, especially if a breakdown or malfunction of your  
card reader might jeopardize life or health, such as  
aerospace equipment, atomic power control systems,  
traffic-related equipment, transportation equipment,  
industrial robotics, combustion equipment, safety devices,  
and life-support systems.  
Card reader components  
Package contents  
Make sure that you received:  
6-in-1 card reader (1)  
Mini-USB 5-pin cable (1)  
Utility and Documentation CD (1)  
Quick Setup Guide (1)  
 
 
Connecting the card reader  
5
Minimum system requirements  
IBM-compatible PC  
Pentium 133 MHz or higher processor  
CD drive  
2 MB of hard drive space  
One available external USB port  
Windows® 2000, Windows® XP, Windows® Vista®,  
Windows® 7, or Mac OS 10.x or higher  
Connecting the card reader  
To connect your card reader, plug the small end of the included USB  
cable into your card reader and the other end into an available  
external USB port.  
If your computer uses Windows 2000, Windows XP, Windows Vista,  
Windows 7, or Mac OS 10.x or higher, your computer automatically  
installs the correct driver, and new drive icons appear in My  
Computer and Windows Explorer (Windows) or on your desktop  
(Mac). If you want to customize the card reader drive icons, see  
“Customizing drive icons (Windows 2000, Windows XP, Windows  
Vista, and Windows 7 only)” on page 8.  
 
 
Using your card reader  
6
Using your card reader  
To access a media card using Windows:  
1
Insert a card into the appropriate slot, as shown in “Card  
slots and LED” on page 7.  
Caution: Cards must be inserted into the correct slot and in  
the correct direction, or you may damage the card or the slot.  
2
3
Open the My Computer or Windows Explorer window, then  
double-click the drive icon for the slot you are using.  
To access files and folders on the inserted card, use normal  
Windows procedures for opening, copying, pasting, or  
deleting files and folders.  
4
When you have finished working with the files on a  
memory card, right-click the memory card icon, then click  
Eject. The light on the memory card reader turns off after  
the card is removed.  
Caution: Do not remove memory cards when the data LED on  
the reader is flashing or blinking.  
To access a media card using Macintosh:  
1
Insert a card into the appropriate slot, as shown in “Card  
slots and LED” on page 7. A new disk icon will appear on  
the desktop.  
Caution: Cards must be inserted into the correct slot and in  
the correct direction. Otherwise you may damage the card or  
the slot.  
2
When you have finished working with the files on a  
memory card, drag the disk icon to Trash or click the disk  
icon and select Put Away from the File menu.  
Caution: Do not insert or remove memory cards while the  
light on the reader is flashing.  
 
 
Using your card reader  
7
Card slots and LED  
Feature  
Description  
SD/SDHC/MMC/xD slot  
Insert Secure Digital card (SD), Secure Digital  
High Capacity card (SDHC), MultiMediaCard  
(MMC, MMCplus), or xD picture cards into the  
upper slot.  
Note: A memory card adapter is required for  
Mini SD, RS MMC, and Micro SD.  
Note: The arrow on your card indicates the  
direction the card should be inserted into the  
slot.  
MS Pro-HG/MS Pro Duo/  
MS Duo/MS Pro/MS slot  
Insert Memory Stick PRO-HG Duo, Memory Stick  
PRO Duo, Memory Stick PRO, Memory Stick DUO,  
or Memory Stick into the lower slot.  
Note: A memory card adapter is required for  
Memory Stick Micro (M2).  
Note: The arrow on your card indicates the  
direction the card should be inserted into the  
slot.  
PRO  
PRO Duo  
PRO-HG  
LED  
Indicates when a slot is accessing a card.  
LED off—Your card reader is not being used.  
Power LED on (green)—Your card reader is  
turned on.  
Data LED on (green)—A card is inserted in the  
slot.  
LED flashing—Data is being transferred  
between the memory card and the computer.  
 
 
Using your card reader  
8
Customizing drive icons (Windows 2000,  
Windows XP, Windows Vista, and Windows 7  
only)  
To make the media card slots easier to recognize, you can  
customize the drive icons.  
Note: Connect the card reader to the computer before  
installing the driver.  
To customize the drive icons using Windows:  
1
2
Save all files and close all programs.  
Insert the included utility CD into your CD drive. The driver  
home page pops up automatically.  
3
Click Install driver for Windows.  
 
 
Using your card reader  
9
4
Click Next, then follow the on-screen instructions to install  
the driver.  
After the driver installation is complete, Windows displays  
new drive icons for each of the slots instead of the standard  
Windows drive icons.  
 
Using your card reader  
10  
5
When Windows detects a card in a slot, the corresponding  
drive icon turns from grey to a color that indicates the card  
type.  
Uninstalling the software  
To uninstall the software in Windows Vista or Windows 7:  
1
2
3
4
Click Start, then click Control Panel.  
Click Uninstall a Program.  
Locate the software in the list, then click Remove.  
Follow the on-screen instructions to uninstall the software.  
 
Using your card reader  
11  
To uninstall the software in Windows XP and Windows 2000:  
1
2
Click Start, then click Control Panel.  
Click Add or Remove Programs.  
3
4
Locate the software in the list, then click Remove.  
Follow the on-screen instructions to uninstall the software.  
 
Using your card reader  
12  
Formatting a memory card  
If your computer has trouble recognizing a new memory card,  
format the memory card in your camera or by using the following  
procedure.  
Caution: Formatting a memory card will permanently delete  
all files on the card. Make sure that you copy any important  
files to a computer before formatting a memory card. Do not  
disconnect the card reader or remove the memory card while  
formatting is in progress.  
To format a memory card in Windows:  
1
2
Click Start, then click My Computer.  
Under Removable Storage, right-click the appropriate  
memory card icon.  
3
4
Click Format.  
Type a name into the Volume Label box, then press  
Enter. The name of your memory card appears next to the  
icon.  
5
6
7
Click Start. A Warning dialog box opens.  
Click OK. The Format Complete window opens.  
Click Close to finish.  
To format a memory card in Mac:  
1
2
3
Click Go, then click Utilities.  
Launch Disk Utility.  
In the left hand column, select the memory card you want  
to erase, then click the Erase tab.  
4
5
6
Select a volume format and name for the memory card.  
Click Erase. A warning box opens.  
Click Erase.  
 
Troubleshooting  
13  
Troubleshooting  
If memory cards do not appear in My Computer or Windows  
Explorer (Windows operating systems) or no icon appears on the  
desktop when a card is inserted into the reader (Mac operating  
systems), check the following:  
Make sure that the USB cable is fully connected to your card  
reader. Unplug and reconnect your card reader.  
Try a different memory card of the same type in the same  
slot. If a different memory card works, the original memory  
card should be replaced.  
Disconnect the cable from your card reader and shine a  
flashlight into the empty card slots. Look to see if any pin  
inside is bent, and straighten bent pins with the tip of a  
small, pointed instrument, such as a mechanical pencil or  
jeweler's screwdriver. Replace your memory card reader if a  
pin has bent so much that it touches another pin.  
If memory cards appear in My Computer (Windows operating  
systems) or Macintosh HD (Mac operating systems) but errors  
occur when writing or reading, check the following:  
Make sure that the memory card is fully inserted into the  
slot.  
Try a different memory card of the same type in the same  
slot. If the different memory card works, the original  
memory card should be replaced.  
Some cards have a read/write security switch. Make sure  
that the security switch is set to Write Enabled.  
Make sure that the amount of data you attempted to store  
has not exceeded the capacity of the card.  
 
 
Troubleshooting  
14  
Inspect the ends of the memory cards for dirt or material  
closing a hole. Clean the contacts with a lint-free cloth and  
small amounts of isopropyl alcohol.  
If errors persist, replace the memory card.  
If no icon appears when a card is inserted into the reader  
(Mac operating systems), check the following:  
The card may have been formatted in Windows FAT 32  
format. Using a PC or digital device, reformat the card using  
the OS X-compatible FAT or FAT16 formats.  
If you get an error message when installing the card reader  
software, check the following:  
Make sure that your card reader is connected to your  
computer.  
Make sure that only one card reader is connected to your  
computer. If other card readers are connected, unplug them  
before installing the software.  
 
Specifications  
15  
Specifications  
Specifications are subject to revision or update without notice.  
Chipset  
Genesys  
Supported file formats FAT 12/16/32, NTFS  
Memory card slots  
Supported cards  
Top slot: SDHC/SD/MMC/xD  
Lower slot: MS Pro-HG/MS Pro Duo/MS Duo/MS Pro/MS  
Secure Digital card (SD, SDHC), MultiMediaCard (MMC,  
MMCplus), xD picture card, Media Stick (MS, MS Pro, MS  
Duo, MS Pro Duo, MS Pro-HG)  
USB transfer speed  
Indicators  
Up to 480 Mbps  
Power/USB link, card detect, and data activity  
USB A-type plug to mini-USB plug  
USB cable  
OS support  
Windows 2000, Windows XP, Windows Vista,  
Windows 7, Mac OS 10.x or higher  
Dimensions  
(L × D × H)  
2.4 × 1.83 × 0.68 inches (61 × 46.6 × 17.4 mm)  
Operating  
temperature  
32° F~104° F (0° C~40° C)  
Storage temperature -4° F~140° F (-20° C~60° C)  
Humidity  
0%~80% RH, non-condensing  
FCC Class B, ICES-003  
Certification  
 
 
Legal notices  
16  
Legal notices  
FCC statement  
This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to Part 15 of the FCC  
Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This  
equipment generates, uses and can radiate radio frequency energy  
and, if not installed and used in accordance with the instructions,  
may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the  
following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician  
for help.  
ICES - Canada's Interference-Causing  
Equipment Standards  
This equipment complies with the applicable technical standards  
of ICES 003:1997 in accordance with the measurement procedures  
specified in CISPR22-96.  
 
 
Legal notices  
17  
One-year limited warranty  
Dynex Products (“Dynex”) warrants to you, the original purchaser of this new  
DX-CR6N1 (“Product”), that the Product shall be free of defects in the original  
manufacture of the material or workmanship for a period of one (1) year from the  
date of your purchase of the Product (“Warranty Period”). This Product must be  
purchased from an authorized dealer of Dynex brand Products and packaged with  
this warranty statement. This warranty does not cover refurbished product. If you  
notify Dynex during the Warranty Period of a defect covered by this warranty that  
requires service, terms of this warranty apply.  
How long does the coverage last?  
The Warranty Period lasts for one year (365 days) from the date you purchased the  
Product. The purchase date is printed on the receipt you received with the  
Product.  
What does this warranty cover?  
During the Warranty Period, if the original manufacture of the material or  
workmanship of the Product is determined to be defective by an authorized  
Dynex repair center or store personnel, Dynex will (at its sole option): (1) repair  
the Product with new or rebuilt parts; or (2) replace the Product at no charge with  
new or rebuilt comparable products or parts. Products and parts replaced under  
this warranty become the property of Dynex and are not returned to you. If service  
of products and parts are required after the Warranty Period expires, you must pay  
all labor and parts charges. This warranty lasts as long as you own your Dynex  
Product during the Warranty Period. Warranty coverage terminates if you sell or  
otherwise transfer the Product.  
How to obtain warranty service?  
If you purchased the Product at a retail store location, take your original receipt  
and the Product to the store you purchased it from. Make sure that you place the  
Product in its original packaging or packaging that provides the same amount of  
protection as the original packaging. If you purchased the Product from an online  
web site, mail your original receipt and the Product to the address listed on the  
web site. Make sure that you put the Product in its original packaging or  
packaging that provides the same amount of protection as the original packaging.  
 
Legal notices  
18  
To obtain in-home warranty service for a television with a screen 25 inches or  
larger, call 1-888-BESTBUY. Call agents will diagnose and correct the issue over  
the phone or will have an Dynex-approved repair person dispatched to your  
home.  
Where is the warranty valid?  
This warranty is valid only to the original purchaser of the Product in the United  
States, Canada, and Mexico.  
What does the warranty not cover?  
This warranty does not cover:  
Customer instruction  
Installation  
Set up adjustments  
Cosmetic damage  
Damage due to acts of God, such as lightning strikes  
Accident  
Misuse  
Abuse  
Negligence  
Commercial use  
Modification of any part of the Product  
Plasma display panel damaged by static (non-moving) images applied  
for lengthy periods (burn-in).  
This warranty also does not cover:  
Damage due to incorrect operation or maintenance  
Connection to an incorrect voltage supply  
Attempted repair by anyone other than a facility authorized by Dynex to  
service the Product  
Products sold as is or with all faults  
Consumables, such as fuses or batteries  
Products where the factory applied serial number has been altered or  
removed  
 
Legal notices  
19  
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE  
REMEDY. DYNEX SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL  
DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS  
PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR  
PRODUCT, LOST BUSINESS OR LOST PROFITS. DYNEX PRODUCTS MAKES NO OTHER  
EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND  
IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY  
IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS  
FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY  
PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED,  
WILL APPLY AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND  
JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED  
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS  
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER  
RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.  
Contact Dynex:  
For customer service please call 1-800-305-2204  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645  
© 2009 Best Buy Enterprise Services, Inc.  
All rights reserved. DYNEX is a trademark of Best Buy Enterprise Services, Inc.  
Registered in some countries. All other products and brand names are trademarks  
of their respective owners.  
 
Distributed by Best Buy Purchasing, LLC  
7601 Penn Ave. South, Richfield, MN 55423 U.S.A.  
© 2009 Best Buy Enterprise Services, Inc. All rights reserved.  
DYNEX is a trademark of Best Buy Enterprise Services, Inc. Registered in  
some countries. All other products and brand names are trademarks of their  
respective owners.  
09-0198  
ENGLISH  
 

Edelbrock Automobile Parts R09783 User Manual
Electro Voice Portable Speaker SH 1512 User Manual
Extron electronic Network Card MAAP100 User Manual
Force10 Networks Network Card 100 00055 01 User Manual
Fostex Cable Box COP 1 96K User Manual
Frigidaire Freezer FPUH19D7L F User Manual
Fujioh Ventilation Hood BUF 06E User Manual
Fujitsu Car Satellite TV System P42HHS10A User Manual
Fujitsu Laptop T3010 User Manual
Furuno SONAR F 851SD User Manual