Bissell Vacuum Cleaner 3101 0 User Manual

User’s Guide  
Models 3101-0 EASY VAC  
Models 3102-0 EASY VAC PLUS  
Assembly  
Operation  
Maintenance  
Troubleshooting  
Thanks for buying a BISSELL EASY VACBare Floor Vacuum System.  
We’re glad you purch
Floor and Carpet vacuum.
care went into the design a
convenient, innovative hom
Your EASY VAC is we
with a comprehensive one-
behind it with a knowledge
Service department, so, sho
problem, you’ll receive fast,
My great-grandfather
in 1876. Today, BISSELL is
design, manufacture, and s
homecare products like you
Thanks again, from a
at BISSELL.  
Mark J. Bissell  
President and Chief Executive O
Crevice Tool  
 
Cord Hook  
Detachable  
Canister Handle  
Handle Release Buttons  
1.  
Quick-  
Release  
Cord Wrap  
Hose Clip  
5’ Stretch Hose  
Crevice Tool  
Attachment  
Clip  
Power  
Cord  
3.  
Crevice Tool  
Lightweight  
Canister  
Lower  
Cord  
Wrap  
Hose Port  
Dirt Cup  
Floor Nozzle Surface Adjustment  
Floor Brush  
2.  
Detachable  
Floor Nozzle  
Bottom View - Floor Nozzle  
3
 
How to use this guide  
Please read this Guide thoroughly before assembling  
This User’s Guide has been designed to help you  
get the utmost satisfaction from your BISSELL  
your vacuum cleaner. Pay particular attention to the  
assembly diagram, assembly instructions, and part  
names. Locate and organize all parts before assembly.  
Familiarize yourself with the parts and where they go.  
Following this User’s Guide will greatly enhance your  
ability to get the best performance from your BISSELL  
EASY VAC Bare Floor and Carpet Vacuum. You’ll  
find assembly and operating instructions, safety  
precautions, as well as maintenance and  
troubleshooting instructions.  
EASY VAC for many years.  
Your EASY VAC comes in four, easy to assemble components.  
No tools are needed.  
WARNING:  
Do not plug in your  
vacuum cleaner until  
you have completely  
assembled it per the  
following instructions  
and are familiar with  
all instructions and  
operating procedures.  
Detachable Canister Handle  
Lightweight Detachable Canister  
Floor Nozzle  
Crevice Tool  
How to put it together  
Attach Upright Handle to Canister Vacuum  
1.  
2.  
Gently slide Handle over square end of Canister Vacuum, pushing until  
buttons on Canister snap into place in opening on Handle. The Handle is  
designed to attach and disassemble easily as you switch from upright to  
canister style cleaning.  
Attach Floor Nozzle to Canister Vacuum  
Grasp Floor Nozzle with one hand, while holding Canister Vacuum firmly  
with the other. With firm, even pressure, press Floor Nozzle into round  
opening at end of Canister Vacuum. Continue pressing gently but firmly  
until Floor Nozzle can go no further. As with the Upright Handle, the Floor  
Nozzle is designed to attach and disassemble easily as you switch from level  
floor to tool style cleaning.  
Attach Crevice Tool to Tool Clip  
Slide narrow end of Crevice Tool over angled post on the side of the  
Canister, then press round end of Tool into semi-circular grip located just  
below the Quick Release Cord Wrap.  
3.  
EASY VAC assembly is now complete.  
4
 
How to use your BISSELL EASY VAC  
Power Cord Quick Release  
The Power Cord is stored at the side of the Canister,  
looped around two Cord Wraps. A molded clip on  
the polarized plug allows it to be clipped to the  
Power Cord during storage.  
1. Remove the plastic plug guard and dispose or  
recycle it.  
2. Unclip polarized plug from Power Cord.  
3. Rotate the Upper Cord Wrap one-half turn  
right or left, and slip Power Cord from Upper  
and Lower Cord Wraps.  
4. Connect Power Cord Plug with a polarized outlet.  
5. To keep the Power Cord out of your way while  
Index  
Safety instructions . . . . . . . . . .2  
Product view . . . . . . . . . . . . . .3  
How to put it together . . . . . . .4  
Index . . . . . . . . . . . . . . . . . . . .5  
How to use your  
Upper and  
Lower Cord  
Wraps  
BISSELL EASY VAC . . . . . . .5-6  
cleaning, place it in the cord hook at the top/back of the handle.  
Maintenance . . . . . . . . . . . . . .7  
Troubleshooting . . . . . . . . . . . .8  
Replacement parts . . . . . . . . . .9  
Warranty . . . . . . . . . . . . . . . .10  
Consumer services . . . . . . . . . .10  
Power Switch  
The Power Switch is located just below the hand grip. Move the switch to  
position “ ” [down] to vacuum, and “ ” [up] to turn unit off when  
cleaning is complete.  
Upright floor cleaning  
Floor Nozzle Adjustment  
You can adjust the brush on the underside of the Floor Nozzle to clean  
bare floors or carpeted areas.  
Floor Nozzle  
Adjustment Lever  
1. Move the lever on the Floor Nozzle to  
the left ( ) for bare floor vacuuming,  
and the brush will adjust to slight  
variations in floor height.  
2. Move the lever to the right ( ) and the brush will lock in position  
for more effective cleaning of carpeted surfaces.  
Cleaning with the Canister  
Your BISSELL EASY VAC is not only a convenient upright bare floor  
and carpet cleaner, it’s also a versatile floor/above floor vacuum  
cleaner when you detach the lightweight canister.  
Floor Cleaning  
1. Detach the Upright Handle by pressing your thumb and fore
on the lock buttons on Canister (using a “pinching” motion
gently pulling Handle off square end of Canister.  
2. For floor surface cleaning, use the Floor Nozzle, following th
surface adjustment instructions.  
3. For edge cleaning or cleaning small areas, you need only to:  
Detach the Hose from the Hose Port at the bottom/ back of the  
Canister. Press the lock button and pull the Hose from the Port,  
then insert the Crevice Tool into the end of the Hose. The Crevice  
Tool also can be placed in the round opening of the canister for  
added versatility.  
5
 
Cleaning with the Canister - continued  
Above Floor Cleaning  
For quick and easy above floor cleaning:  
1. Detach the Hose from the Hose Port at the bottom/back of the  
Canister. Press the lock button and pull the Hose from the Port,  
then insert the Crevice Tool into the end of the Hose.  
To resume normal floor vacuuming:  
1. Remove Crevice Tool and store in Crevice Tool Clip.  
2. Reconnect Hose to the Hose Port, making certain it is locked  
fully in place.  
Tip:  
Before cleaning  
under low furni-  
ture, check for  
objects that  
might block the  
vacuum hose.  
Do not pick up  
hard or sharp  
objects such as  
glass, nails,  
3. Attach Floor Nozzle and Upright Handle, following  
instructions in “How To Put It Together,” page 4.  
screws, coins,  
paper clips, etc.  
Emptying the Dirt Cup  
Your EASY VAC features a translucent plastic Dirt Cup, so  
you can easily see when it needs to be emptied. For best  
performance, empty when debris reaches halfway up the cup.  
1. Press the lock button down and forward  
(away from the Canister Handle) while  
Power Cord Storage  
When you are done using your BISSELL  
EASY VAC, store the Power Cord.  
lifting the upper portion of the Dirt Cup  
1. Turn EASY VAC off by moving  
away from the Canister.  
2. Grasp the Filter frame and pull it straight  
from the Cup. Empty the Cup, and check  
switch to “ ” position.  
2. Unplug Power Cord by grasping the  
polarized plug [NOT the cord) and  
disconnect from outlet.  
3. Loop Power Cord around Cord Wraps  
on side of cleaner, making certain  
Quick Release Cord Hook is pointed  
up toward the Handle.  
both the filter and the Cup for cleanliness  
and damage. You may wash the Cup with  
warm (not hot) water and mild liquid dish  
soap only. Rinse and dry thoroughly before  
reattaching it.  
3. If the surface of the filter looks dirty or  
discolored, now’s the time to clean or  
4. Clip molded plug to Power Cord  
to secure.  
replace it. To clean the filter, remove any debris still clinging  
to the filter. After a time, it will be necessary to replace your  
filter. See “Routine Maintenance” for instructions.  
4. With filter in place at the top of the Cup*, place the small  
tab at the bottom of the Canister cavity, then press the upper  
portion of the Cup into place until the lock button can  
easily be pushed back into position.  
*Push filter down tight to ensure gasket is in place.  
6
 
Maintenance  
To maintain maximum performance from your EASY VAC,  
perform these simple maintenance checks periodically.  
WARNING:  
To  
reduce the risk of electric  
shock, turn Power Switch  
OFF and disconnect  
For average household use, follow this maintenance schedule:  
polarized plug from  
electrical outlet before  
performing maintenance.  
Weekly:  
Check the debris level in the Dirt Cup and  
empty if necessary.  
Monthly:  
Check the filter for wear and tear.  
Remove debris from the filter. It may also  
be necessary to use and old toothbrush to  
clean off any debris. Replace as needed.  
Tip:  
Vacuuming new  
carpet or fine  
powders such as  
drywall dust may  
clog the filter, so  
check it more  
frequently. Shake  
out or replace  
as necessary.  
Replace Filter  
As you vacuum, dirt and debris are deposited in the Dirt Cup  
while air passes through the filter before being returned to  
the room. This process enhances the vacuum path while  
dramatically reducing dust, dirt, and potential allergens from  
the air you breathe. Replacing the filter periodically enhances  
vacuum power and air quality. To replace the filter:  
1. Remove the Dirt Cup.  
2. Grasp the filter frame and pull it straight from the Cup.  
Empty the Cup.  
3. Replace the filter. Push new filter into place at the top of the  
Cup, place the small tab at the bottom of the Cup into the  
slot at the bottom of the Canister cavity, then press the upper  
portion of the Cup into place until the lock button snaps  
into place. Use only BISSELL Style 6, #32047 Filters  
[package of 2] in your BISSELL EASY VAC Model 3101-0.  
4. EASY VAC PLUS Model #3102-0 features a high efficiency  
Filter for EASY-VAC Model 3101-0  
3M FiltreteFilter. To keep your cleaner operating at peak  
efficiency and to remove irritating allergens from your  
home, you should change the FILTRETE filter every six  
months. Use only BISSELL Style 6, #32046 Filters [package  
of 2]. The cup-shaped filter lifts out from the top of the  
Dirt Cup, and the new one fits into place.  
You may purchase these filters:  
at your local retailer  
with the order form in this User’s Guide  
by calling  
BISSELL Consumer Services  
1-800-237-7691  
FILTRETE Filter for EASY-VAC PLUS Model 3102-0  
Monday - Friday  
Saturday  
8 a.m. — 7 p.m. EST  
9 a.m. — 2 p.m. EST  
or from the BISSELL website —  
http://www.bissell.com  
7
 
Troubleshooting  
WARNING:To reduce  
the risk of injury from moving  
parts, and/or electrical shock,  
turn Power Switch OFF (position  
”) and disconnect polarized  
plug from electrical outlet  
before performing  
troubleshooting checks.  
Vacuum cleaner wont run.  
Possible Causes  
Remedies  
Vacuum cleaner is not plugged in  
Check electrical plug  
Household fuse/breaker  
Check/replace fuse or reset breaker switch  
Call BISSELL Consumer Services  
Vacuum cleaner wont pick up dirt.  
Possible Causes  
Remedies  
Dirt Cup is full  
Empty Dirt Cup  
Filter dirty  
Check and remove debris. Replace if necessary  
Check fit and tighten  
Hose not secure in Hose Nozzle  
Dirt Cup not sealed against Canister  
Open Dirt Cup, then press firmly until you  
hear lock button snap into place  
Vacuum path clogged  
Visually check: (1) Floor Nozzle, (2) Hose Port,  
(3) Crevice Tool and (4) Hose for hair, pine  
needles, small toys, large pieces of paper that  
may be obstructing the vacuum path.  
Carefully remove blockage  
8
 
Part Numbers and Descriptions  
Item Part No. Part Name  
1
2
3
4
5
6
7
8
010-0031 Crevice Tool  
010-0032 Filter (Polyester Fiber, 2/package)  
010-0033 Filter (FILTRETE, 2/package)  
010-0034 Dirt Cup (Blue) EASY VAC  
010-0035 Dirt Cup (Purple) EASY VAC PLUS  
010-0036 Upright Handle  
010-0037 Floor Nozzle  
010-0038 Floor Strip Brush  
1
NOTE: Not all attachments pictured are included  
with every model, but they are available.  
To order replacement parts or additional  
attachments call:  
BISSELL Consumer Services  
1-800-237-7691  
Monday - Friday 8 a.m. — 7 p.m. EST  
Saturday  
9 a.m. — 2 p.m. EST  
Or visit our Website @ http://www.bissell.com  
2 & 3  
Please have your model and part numbers of unit ready.  
7
4 & 5  
6
8
9
 
About your warranty  
This warranty gives you specific legal rights, and you may also have other  
rights which may vary from state to state. If you need additional instruction  
regarding this warranty or have questions regarding what it may cover, call  
BISSELL Consumer Services.  
One Year Warranty  
BISSELL Inc., upon receipt of the product, will repair or replace, free of charge,  
any part which is defective or malfunctioning within one year of the purchase  
date, provided that it is used for personal and not commercial or rental service.  
If the vacuum cannot be repaired, BISSELL Inc. will replace the product or  
refund the full price, at your option.  
If your BISSELL product should require service:  
1. Call BISSELL Consumer Services at 1-800-237-7691 and we will  
give you the name and address of an authorized BISSELL Service  
Center in your area.  
2. If there is not an authorized BISSELL Service Center in  
your area, one of our Service Representatives will be happy  
to assist you. You can also visit the BISSELL website at  
http://www.bissell.com to locate a Service Center near you.  
The product should be returned with a photocopy of  
your proof of purchase. (Your dated sales receipt is your  
warranty - send a photocopy, not the original.)  
— Insure the product when shipping for your protection  
from loss.  
BISSELL Consumer Services  
For information about repairs or replacement parts, or  
questions about your warranty, call:  
BISSELL Consumer Services  
1-800-237-7691  
Monday - Friday 8 a.m. — 7 p.m. EST  
Saturday  
9 a.m. — 2 p.m. EST  
Visit our web site at http://www.bissell.com  
Or write:  
BISSELL INC  
PO Box 3606  
Grand Rapids MI 49544  
ATTN: Consumer Services  
©1998 BISSELL Inc  
Grand Rapids, Michigan  
All rights reserved. Printed in China.  
Part Number 010-0039  
Rev 12/98  
When contacting BISSELL, have model number of unit available.  
Please record your Model Number: ___________________  
Please record your Purchase Date: ___________________  
Visit our web site at:  
NOTE: Please keep your original sales receipt. It is your warranty.  
http://www.bissell.com  
10  
 

Billion Electric Company Network Router BIPAC 7500GL User Manual
Blue Rhino Charcoal Grill NPC1924P User Manual
Blue Sea Systems Yard Vacuum PN 8363 User Manual
Braun Bathroom Aids MD 9000 User Manual
Broilmaster Gas Grill P3 1 User Manual
Cables Unlimited Speaker System SPK POOL User Manual
Cambridge Audio Switch Incognito BK10 User Manual
Casio Universal Remote CTK 230 User Manual
Cino Scanner F700BT User Manual
Cisco Systems Cordless Telephone 7945G User Manual