Billion Electric Company Network Card BIPAC 2AB 20 User Manual

BIPAC-2AB 2.0  
ISDN a/b Adaptor  
User’s Manual  
 
Table of Contents  
CHAPTER 1  
1
Introduction ...................................................................................1  
An Overview of the BIPAC-2AB 2.0 ..........................................1  
Package Contents.........................................................................2  
BIPAC-2AB 2.0 Features.............................................................3  
CHAPTER 2  
4
Using BIPAC-2AB 2.0...................................................................4  
Before Connecting .......................................................................4  
Connecting the BIPAC-2AB 2.0..................................................4  
The Front Panel LEDs .................................................................5  
Programming the BIPAC-2AB 2.0 Functions..............................6  
Using the Telephone Functions....................................................8  
CHAPTER 3  
12  
Troubleshooting...........................................................................12  
Troubleshooting Procedures ......................................................12  
 
 
Chapter 1  
Introduction  
An Overview of the BIPAC-2AB 2.0  
What is ISDN?  
ISDN is an abbreviation for Integrated Services Digital Network. ISDN  
transfers information digitally and integrates all telecommunication services  
(such as telephone, teletext, videotex, etc.) into a single network. Using  
ISDN, you can transfer text, voice, data files, images, and even video.  
Before the use of ISDN, telecommunications operated using analog devices,  
which limited the quality of telecommunication transfers. With ISDN  
technology, the telephone lines can transmit data digitally with much greater  
speed and clarity of transmission than with analog transmissions. The ISDN  
is capable of transmitting all kinds of information at greatly accelerated  
rates. A typical modem transmission has a rate of 56Kbps (kilobits per  
second or thousand bits per second). ISDN digital technology allows  
transfer rates of up to 128Kbps.  
Because ISDN transmits data digitally, the data is virtually error free, and  
the transmission is much clearer, with fewer interruptions and slowdowns in  
facsimile transmissions. With ISDN devices implemented throughout the  
world, a truly digital network will emerge, allowing everyone fast and easy  
access to the global information highway.  
 
BIPAC-2AB 2.0 User’s Manual  
The BIPAC-2AB 2.0 ISDN a/b Adaptor  
The BIPAC-2AB 2.0 ISDN a/b adaptor allows you to make the transition  
from analog to digital without having to discard all your present analog  
devices. The BIPAC-2AB 2.0 provides an interface between your ISDN  
line and present analog devices such as your telephone. With a full array of  
convenient functions such as call waiting, call holding, call transfer, call  
forwarding and speed dialing among others, your BIPAC-2AB 2.0 will help  
you step from the world of analog communications right into the 21st  
century world of ISDN!  
BIPAC-2AB 2.0  
FIGURE 1: THE BIPAC-2AB 2.0 ISDN A/B ADAPTOR  
Package Contents  
The BIPAC-2AB 2.0 package comes with the following accessories:  
1. The BIPAC-2AB 2.0 external ISDN a/b adaptor  
2
 
Chapter 1 Introduction  
2. One RJ-45 cable  
3. One AC-to-DC power adaptor  
4. This User’s Manual  
BIPAC-2AB 2.0 Features  
The BIPAC-2AB 2.0 supports many standard and enhanced features that allow  
you to make full use of ISDN services with your existing analog devices,  
including the following:  
Caller ID  
Individual phone number (MSN) for each analog port  
Password-protected for configurations  
Inter-call  
Call waiting  
Call hold/retrieve  
Internal call transfer  
Internal call forwarding  
Call suspend/resume  
Supports “keypad protocol” for supplementary services  
Speed dialing  
Call filter  
Do not disturb  
Distinct ring pattern for different MSN  
3
 
Chapter 2  
Using BIPAC-2AB 2.0  
Before Connecting  
Make sure that you have all you need to connect the BIPAC-2AB 2.0 ISDN a/b  
adaptor. You should have the following:  
1. At least one analog telephone (or other analog device)  
2. A power outlet that supplies 220 ~ 240 volts AC  
3. An ISDN basic rate S0 interface released by PTT (Post, Telephone  
and Telegraph administration)  
Connecting the BIPAC-2AB 2.0  
Please refer to the following instructions and figures for installation procedures:  
1. Connect one or two analog telephones (or other analog devices) to the  
RJ-11 jacks labeled “a/b 1” or “a/b 2” on the back of the BIPAC-2AB  
2.0. Refer to Figure 2.  
2. Connect your ISDN line to the RJ-45 jack labeled “ISDN S0” on the  
back of the BIPAC-2AB 2.0. Refer to Figure 2.  
3. Plug the power adaptor into the power outlet. The POWER LED will  
illuminate on the front panel.  
 
Chapter 2 Using BIPAC-2AB 2.0  
FIGURE 2: CONNECTING THE BIPAC-2AB 2.0  
4. The BIPAC-2AB 2.0 ISDN a/b adaptor will run a Power-On self-  
diagnostic test. The LEDs on the front panel will blink on and off  
one by one and the connected analog telephones will ring.  
The Front Panel LEDs  
The following illustration and table describe the front panel LEDs:  
FIGURE 3: THE FRONT PANEL LEDS  
LED  
PWR  
Meaning  
When lit it indicates AC power is connected.  
Flashes periodically to indicate that the BIPAC-2AB 2.0  
is working properly.  
RUN  
ISDN  
B1  
When lit it indicates that the ISDN S0 bus is activated.  
When lit it indicates that the ISDN “B1” channel is  
being accessed. It will flash during data transfer.  
When lit it indicates that the ISDN “B2” channel is  
being accessed. It will flash during data transfer.  
When lit it indicates that the analog device connected to  
the Phone 1 port is in use.  
B2  
When lit it indicates that the analog device connected to  
the Phone 2 port is in use.  
5
 
BIPAC-2AB 2.0 User’s Manual  
Programming the BIPAC-2AB 2.0 Functions  
The functions of BIPAC-2AB 2.0 are programmed by the use of the telephone  
number keys (0 ~ 9), the pound key (#), and the star key ( ).  
*
You should hear 2 short tones if the programming is  
successful; otherwise, you will hear more than 6 tones  
indicating failure of programming.  
Function k ID k First k Second k  
Third  
Field  
k
e
y
Name  
e
y
e Field e  
Field  
e
y
Note  
y
y
Password  
Setup  
* 98 * Old  
Pass  
*
New Pass #  
Password  
Enabling  
* 97 * Pass  
*
Flag  
#
Flag=0: disable password  
Flag=1: enable password  
Id=0 or null: default setting  
Factory  
Default  
* 96 * Pass *  
* 95 * Pass  
Id  
#
*
Special  
function  
Setup  
*
Func Id  
Flag  
# Func Id=1, PCM Law  
Flag=0 or null: A-Law  
Flag=1: µ Law  
Func Id=2, Bearer capability  
Flag=0 or null: 3.1kHz audio  
Flag=1: speech  
Flag=2: G3 Fax  
Func Id=3, Ring Signal  
Flag=0 or null: 25Hz  
Flag=1: 16Hz  
Flag=2: 50 Hz  
Func Id=4, Not check in-band tone  
Flag=0 or null: disable  
Flag=1: enable  
6
 
Chapter 2 Using BIPAC-2AB 2.0  
Caller ID  
Setup  
* 94 * Pass  
*
Func Id  
*
Parameter # Func Id=0, Enabling  
Flag=0 or null: disable  
Flag=1: enable  
Func Id=1, Caller ID Type  
Parameter = 0~4  
Func Id=2: Caller ID Country  
Parameter= 0~99  
Func Id=3, Date and Time  
Func Id=4, Call waiting  
Func Id=5, Insert zero number  
Flag=0 or null: disable  
Flag=1: enable  
MSN Setup * 89 * Pass  
*
*
*
Id  
*
#
#
Number # Id=1~3, MSN1 ~ MSN3  
Number Length <= 20  
If Length = 0, Clear the setting  
Flag=0 or null: Listen to all MSNs  
Flag= 1: Listen to a specified MSNs  
Flag= 2: Do not disturb  
MSN Listen * 88 * Pass  
Enable  
Flag  
Calling  
Party  
*
87 * Pass  
Number  
Number Length <= 20  
If Length = 0, Clear the setting  
Number  
Setup  
Speed  
* 86 * Pass  
*
Id  
*
Speed  
Dialing  
Number  
# Id=1~4  
Number Length <= 24  
If Length = 0, Clear the setting  
Dialing  
Number  
Setup  
Authority  
Setup Access  
code  
* 85 * Pass  
*
*
Id  
Id  
*
*
Restricted # Id=1~4  
Number  
Number Length <= 4  
If Length = 0, Clear the setting  
Call Filter  
Setup  
*
84 * Pass  
Number # Id=1~4  
Number Length <= 20  
If Length = 0, Clear the setting  
7
 
BIPAC-2AB 2.0 User’s Manual  
Ring  
* 83 * Pass  
*
Func Id  
*
Parameter # Func Id=0, Ring unit  
parameter=01~99(0.1s)  
Pattern  
(Alert  
On/Off  
Length)  
Setup  
Default is 10 (1s)  
Func Id=5, Hold Notice  
Parameter=00~99 Ring unit  
Default is 0  
Func Id=1~3, MSN1~3  
Func Id=4, Default Ring Pattern  
Func Id=6, Internal Ring Pattern  
Parameter=x1x2  
1<=x1,x2<=9 Ring Unit  
x1=ring on , x2=ring off  
Default is x1=1 , x2=4  
Function  
Enabling  
*
82 * Pass  
*
Func Id  
*
Flag  
# Func Id=1, CLIR  
Flag=0 or null: Disable  
Flag=1: Enable one time  
Flag=2: Enable always  
Func Id=2, No Call Waiting  
Func Id=3, Authority Setup  
Func Id=4, Call Filter  
Func Id=5, Internal Call Forwarding  
Flag=0 or null: Disable  
Flag=1: Enable  
Volume  
Control  
Setup  
*
81 * Pass  
*
Func Id  
*
Flag  
# Func Id=1, MIC Volume  
Flag=0 (low) ~ 5 (high)  
Func Id=2, Speaker Volume  
Flag=0 (low) ~ 4 (high)  
Shaded area can be ignored if the password is disabled.  
The factory default password is 0000.  
Using the Telephone Functions  
With an analog telephone connected to the phone port of the ISDN TA, you can  
avail of the following functions by using the number keys (0 ~ 9), the pound  
key (#), and the star key ( ):  
*
8
 
Chapter 2 Using BIPAC-2AB 2.0  
Function  
Description  
To make an external phone call, dial the number as you would  
with a regular phone system.  
External  
Calling  
To make a call to the other analog port of the ISDN a/b adaptor,  
Inter-call or  
Internal  
you can press:  
Calling  
#
Speed  
To dial any of the Speed Dialing numbers that you have  
programmed in, use the following command:  
Dialing  
5 ID  
*
where ID is a number from 1 to 4.  
Example: If the 4th speed dialing number is 5551113, the  
following combination:  
54  
*
dials a call with the number 5551113.  
Redial  
To redial a number, use the following command:  
01  
*
Pick Up  
To answer an incoming call that is designated to the other analog  
port, you can press:  
*02  
Make a New To disconnect an active call and then have the dial-tone for  
making a new call to, you can press:  
Call  
*03  
Hold/  
To put an active call on hold, use the following command line:  
#
Retrieve  
*
To retrieve a call that’s been put on hold, press the star key and  
pound key ( #).  
*
Disconnect  
and then  
Retrieve  
To disconnect an active call and then retrieve a call that has been  
put on hold, use the following command line:  
#
*0  
9
 
BIPAC-2AB 2.0 User’s Manual  
Call  
If you have an active call and the Call Waiting function is  
enabled, you will hear two tones when there is another incoming  
Waiting  
call. You can switch between the two calls by using the  
Hold/Retrieve function ( # ).  
*
To transfer a call to the other analog port of the ISDN TA, you  
can first put the call on hold by pressing:  
Internal  
Call  
#
Transfer  
*
Then, make an internal call with the following command:  
#
After you put the telephone handset on-hook (hang up), the call  
will be transferred to the other port.  
For two or more ISDN devices (for example, one ISDN a/b  
adaptor and one ISDN phone) connected to your ISDN line, you  
can suspend a call on one device (ISDN a/b adaptor) and resume  
the call on the other (ISDN phone).  
Suspend/  
Resume  
To suspend a call with the analog telephone connected to the  
ISDN a/b adaptor, enter this command:  
Call ID #  
**  
Call ID is not required or any number up to 8 digits.  
You can resume the suspended call when you use the command  
with the same Call ID.  
Example: If you receive a call in the living room and want to  
continue it in another room, use this combination  
12345 #  
**  
in the living room and hang up. Go to the other room and enter  
the command again:  
12345 #  
**  
your call is resumed.  
10  
 
Chapter 2 Using BIPAC-2AB 2.0  
Keypad  
Some telephone companies’ ISDN systems are using “Keypad  
Protocol” for activating/deactivating some supplementary  
services, such as external call forwarding. To let the ISDN a/b  
adaptor enter “Keypad” mode, you can press:  
*00  
Then, all the following keys and numbers will be sent out using  
“Keypad Protocol”.  
Example: If your telephone company give you a keypad  
command of *21*number# to activate the external call  
forwarding function, you can press:  
*00*21*number#  
to send out *21*number# with “Keypad Protocol”. After the  
keypad command is sent out, all the incoming calls will be  
forwarded to the number.  
11  
 
Chapter 3  
Troubleshooting  
Troubleshooting Procedures  
Error  
Event  
Possible  
Cause  
Remedy  
The B1 LED is  
always lit after  
power up  
The RAM is  
defective.  
Consult your dealer.  
The B2 LED is  
always lit after  
power up  
The ISDN chip is  
defective.  
Consult your dealer.  
No dial tone from  
ISDN switch or  
PABX  
1. Can not  
activate S0  
1. Ensure that the  
ISDN S0 line is  
securely connected  
to the RJ-45 jack.  
2. No B channel  
available  
2. Ensure no other  
device is on the  
same S0 line and  
occupying the B  
channel.  
 
Appendix A — Product Support  
Error  
Possible  
Event  
Cause  
Remedy  
Can not receive  
incoming call.  
1. Incoming call’s  
phone number  
does not match  
any a/b port’s  
1. Ensure that the  
phone number for  
each a/b port is  
correctly  
phone number  
configured.  
2. Do Not Disturb  
function has  
2. Disable Do Not  
Disturb.  
been enabled.  
3. Call Forwarding  
function has  
3. Disable Call  
Forwarding.  
been enabled.  
Can not have call  
waiting function.  
1. Telephone  
company does  
not support this  
function.  
1. Check with your  
telephone  
company to see if it  
supports call  
waiting.  
2. Do Not Disturb  
function has  
2. Disable Do Not  
Disturb.  
been enabled.  
If you continue to have problems you should contact the dealer where you  
bought this BIPAC-2AB 2.0. If you have any other questions you can contact  
Billion Electric Co., Ltd. directly at the following addresses:  
13  
 

Beyerdynamic Microphone MCS D 2074 User Manual
Black Box Network Hardware 24+4 PORT GIGABIT SWITCH MANAGED W 4 SFP + 10G User Manual
Black Box Switch 410T User Manual
Boss Audio Systems Carrying Case MR1420S User Manual
Bushnell Hunting Equipment 202205 User Manual
Cadence Telephone Mar06 User Manual
Canon Camera Accessories NVD NORS220 User Manual
Canon Universal Remote ZR 1000 User Manual
Chamberlain Garage Door Opener 1270LMC User Manual
Chauvet Landscape Lighting Quad 6 User Manual