Owner’s manual
DXZ735MP
AM/FM CD/MP3/WMA PLAYER
•
•
Clarion Co., Ltd.
PE-2561K
280-7945-01
All Rights Reserved. Copyright © 2003: Clarion Co., Ltd.
2003/04 (AB)
Display Items
Flip Down Panel
2. PRECAUTIONS
This unit uses a flip-down structure that makes possible large-size displays.
Z-Enhancer Plus indication
Operation status indication
Titles, clock, etc. are displays.
1. When the inside of the car is very cold and the
player is used soon after switching on the
heater moisture may form on the disc or the
optical parts of the player and proper playback
may not be possible. If moisture forms on the
disc, wipe it off with a soft cloth. If moisture
4. When closing the FLIP DOWN PANEL, do not
CAUTION
CAUTION
When opening and closing the FLIP DOWN
PANEL, be careful not to catch your fingers.
They could be injured.
press the [OPEN] button.
USE OF CONTROLS, ADJUSTMENTS, OR PER-
FORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN, MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
5. Strong impacts to the operating or display
section can cause damage or deformation.
6. If the FLIP DOWN PANEL does not open
fully, gently open it with your hand.
1. Always use this unit with the FLIP DOWN
PANEL closed.
forms on the optical parts of the player, do not THE COMPACT DISC PLAYER and MINI DISC
use the player for about one hour. The con- PLAYER SHOULD NOT BE ADJUSTED OR RE-
densation will disappear naturally allowing normal PAIRED BY ANYONE EXCEPT PROPERLY
2. Do not force operations or use this device
abnormally when opening or closing the
FLIP DOWN PANEL.
operation.
QUALIFIED SERVICE PERSONNEL.
2. Driving on extremely bumpy roads which cause CHANGES OR MODIFICATIONS NOT EX-
3. Do not use the FLIP DOWN PANEL as a tray
to place objects on when it is open.
severe vibration may cause the sound to skip. PRESSLY APPROVED BY THE MANUFAC-
Stereo indication
Manual indication
TURER FOR COMPLIANCE COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIP-
MENT.
3. This unit uses a precision mechanism. Even in
the event that trouble arises, never open the
case, disassemble the unit, or lubricate the ro-
tating parts.
: Disc folder indication
: Scan indication
Function mode indication
The names of modes being
selected, etc. are displayed.
: Repeat indication
: Random indication
INFORMATION FOR USERS:.
CHANGES OR MODIFICATIONS TO THIS PROD-
UCT NOT APPROVED BY THE MANUFAC-
TURER WILL VOID THE WARRANTY AND WILL
VIOLATE FCC APPROVAL.
Handling Compact Discs
Use only compact discs bearing the
Preset channel indication (1 to 6)
Disc number indication (1 to 12)
•
•
Do not use compact discs that have large
scratches, are misshapen, cracked, etc. Use of
such discs may cause misoperation or damage.
or
: DUAL ZONE indication
: Main indication
mark.
Do not play heart-shaped, octagonal, or other
specially shaped compact discs.
To remove a compact disc from its storage case,
press down on the center of the case and lift the
disc out, holding it carefully by the edges.
: Sub indication
Some CDs recorded in CD-R/CD-RW mode
may not be usable.
: Mute indication
• Do not use commercially available CD protec-
tion sheets or discs equipped with stabilizers,
etc. These may damage the disc or cause
breakdown of the internal mechanism.
: MAGNA BASS EXTEND indication
Handling
•
Compared to ordinary music CDs, CD-R and
CD-RW discs are both easily affected by high
temperature and humidity and some of CD-R
and CD-RW discs may not be played. Therefore,
do not leave them for a long time in the car.
: WMA indication
: MP3 indication
Storage
• Do not expose compact discs to direct sunlight
or any heat source.
• Do not expose compact discs to excess hu-
midity or dust.
• Do not expose compact discs to direct heat
from heaters.
• New discs may have some roughness around
the edges. If such
discs are used, the
Ball-point pen
player may not work
or the sound may
Roughness
Cleaning
skip. Use a ball-point
pen or the like to re-
move any roughness
from the edge of the
disc.
• To remove fingermarks and dust, use a soft
cloth and wipe in a straight line from the center
of the compact disc to the circumference.
LCD Screen
• Do not use any solvents, such as commercially
available cleaners, anti-static spray, or thinner
to clean compact discs.
• After using special compact disc cleaner, let
the compact disc dry off well before playing it.
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.
The screen will recover when it returns to normal temperature.
•
Never stick labels on the surface of the compact
disc or mark the surface with a pencil or pen.
• Never play a compact disc with any cello-
phane tape or other glue on it or with peeling
off marks. If you try to play such a compact
disc, you may not be able to get it back out of
the CD player or it may damage the CD
player.
Be sure to unfold and read the next page. /
8
DXZ735MP
DXZ735MP
3
DXZ735MP
4
Major button operations when external equipment is
connected to this unit
3.CONTROLS /
/
4. NOMENCLATURE
●When the TV is connected
Note:
●When the CD/MD/DVD changer
Source unit /
/
∗
For details, see the section “TV operations”.
• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold).
is connected
[P/A] button
∗ For details, see the section “CD/MD
changer operations”. For the DVD
changer, refer to the Owner’s Manual pro-
vided with the DVD changer.
Names of the Buttons and their Functions
• Perform preset scan while in the TV mode.
When the button is pressed and held, auto
store is performed.
[
[
]
ROTARY
[OPEN] button
[PLAY LIST] button
]
OPEN
[
] button
• Deeply push in [OPEN] button to unlock the
flip down panel.
• Press and hold for 1 second or longer to turn
on or off the play list mode. (MP3/WMA disc
only)
[D] button
• Switch the TV picture mode or VTR (external)
picture mode.
• When the button is pressed and held,
switches the disc titles or track titles while in
the MD changer mode.
[ROTARY] knob
• Adjust the volume by turning the knob clock-
wise or counterclockwise.
[
]
]
]
DZ
[DIRECT] buttons
• Store a station into memory or recall it directly.
[RDM] button
• When the button is pressed and held,
switches the user titles or track titles, etc.
while in the CD changer mode.
[FNC]
[A-M]
[BND]
[
Z+
SW-VOL
• Perform random play while in the CD mode.
• Press and hold the button for 1 second or
longer to perform folder random play while in
the MP3/WMA mode.
[
• Use the knob to perform various settings.
[a], [d] buttons
• Select a station.
[DZ] button
[
]
COLOR
[T] button
• Use the button to input a title in the CD
changer mode.
• Press and hold for 1 second or longer to turn
on or off the dual zone mode.
• Press to switch the control zone between
main zone or sub zone while dual zone mode
on.
[BND] button
• Switch the band.
• When the button is pressed and held, switch
seek tuning or manual mode.
[RPT] button
• Repeat play while in the CD mode.
• Press and hold the button for 1 second or
longer to perform folder repeat play while in
the MP3/WMA mode.
•
Use the button to scroll the title during CD-text
play or MD changer play in the MD changer mode.
[a], [d]
[
]
[
]
DIRECT
[UP], [DN] buttons
• Select the disc.
[Z+] button
[
]
SCN
[ ]
I
[SCN] button
• Perform scan play for 10 seconds of each
track while in the CD mode.
• Press and hold the button for 1 second or
longer to perform folder scan play while in the
MP3/WMA mode.
• Use the button to select one of the 3 types of
sound characteristics already stored in
memory.
[
]
RPT
[
], [
]
DN UP
[RDM] button
[ ]
D
[
]
RDM
•
Perform random play. Also perform disc ran-
dom play when the button is pressed and held.
[
]
PLAY LIST
[ ]
T
[SW-VOL] button
• Adjust sub woofer volume.
The volume is adjusted in the range 6.
[RPT] button
[
]
P/A
•
Perform repeat play. When this button is pressed
and held, disc repeat play is per-formed.
[
] button
[COLOR] button
• Button’s color change to multicolor.
• Play or pause a CD while in the CD mode.
With the FLIP DOWN PANEL opened /
/
[BND] button
• Move the next disc in increasing order.
[a], [d] buttons
[I] button
• Select a station while in the radio mode or
select a track when listening to a CD. These
buttons are used to make various settings.
• Press and hold the button for 1 second or
longer to switch the fast-forward/fast-back-
ward.
[SCN] button
• Recall ISR radio station in memory.
• Press and hold for 2 seconds or longer: Store
current station into ISR memory (radio mode
only).
• Perform scan play for 10 seconds of each
track. Disc scan play is performed when the
button is pressed and held.
[
]
[
]
CD SLOT
•
Press and hold the button for 1 second or
longer to switch the main and sub zone sound
source. (only while dual zone mode on)
[
] button
• Play or pause a CD, MD or DVD.
[BND] button
[a], [d] buttons
• Switch the band, or seek tuning or manual
tuning while in the radio mode.
• Play a first track while in the CD mode.
[D] button
• Switch the display indication (Main display,
Clock display).
• Select a track when listening to a disc.
•
Press and hold the button for 1 second or
longer to switch the fast-forward/fast-backward.
[A-M] button
[T] button
• Use the button to switch to the audio mode
(bass/treble, balance/fader Z-Enhancer Plus)
• Press and hold for 1 second or longer to turn
on or off the MAGNA BASS EXTENED.
• Use the button to input a title in the Tuner, CD
mode.
• Press and hold the button for 1 second or
longer to enter the adjust mode.
[FNC] button
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
[P/A] button
• Press the button to turn on the power.
Press and hold the button for 1second or
longer to turn off the power.
• Perform preset scan while in the radio mode.
When the button is pressed and held, auto
store is performed.
• Switches the operation mode among the ra-
dio mode, etc.
[UP], [DN] buttons
• Select the Folder. (MP3/WMA disc only)
[Q] button
[DIRECT] buttons
• Store a station into memory or recall it di-
rectly while in the radio mode.
• Eject a CD when it is loaded into the unit.
[CD SLOT]
• CD insertion slot.
5
DXZ735MP
6
DXZ735MP
DXZ735MP
7
5. DCP
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
CAUTION
Be sure to close the HOLD FLAP for safety
when removing the DCP.
We recommend taking the DCP with you when
leaving the car.
Attaching the DCP
1. Insert the right side of the DCP into the main
unit.
Removing the DCP
1. Press the [FNC] button for 1 second or
longer to turn off the power.
2. Insert the left side of the DCP into the main
unit.
2. Deeply push in [OPEN] button to unlock the
2.
flip down panel.
∗ If the flip down panel does not open fully, gen-
tly open it with your hand.
[OPEN] button
DCP
1.
CAUTION
• The DCP can easily be damaged by
shocks. After removing it, be careful not to
drop it or subject it to strong shocks.
DCP
3. Pull the DCP toward you and remove it.
• If the FLIP DOWN PANEL is kept open, the
DCP may drop due to vibration of the car.
This results in damage to the DCP. So
close the FLIP DOWN PANEL or remove
the DCP to store into the case.
DCP
• The connector connecting the source unit
and the DCP is an extremely important
part. Be careful not to damage it by press-
ing on it with fingernails, screwdrivers, etc.
Note:
• If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
4. Close the HOLD FLAP.
HOLD FLAP
DXZ735MP
9
Functions of Remote Control Unit Buttons
6. REMOTE CONTROL
Mode
CD/MD changer
DVD changer
Receiver for remote control unit
Radio
CD/MP3/WMA
TV
Button
[FUNC]
Switches among radio, CD/MP3/WMA, CD/MD changer, DVD changer, TV and AUX.
Plays the first track.
Top play.
Moves the next disc
in increasing order.
[BAND]
Switches reception
band.
Switches reception
band.
Operating range: 30˚ in all directions
Signal transmitter
Increases and decreases volume (in all modes).
[
[
] , [
] , [
]
]
Moves preset
channels up and
down.
Moves tracks up and down.
When pressed and held for 1 second:
Fast-forward/fast-backward.
Moves preset
channels up and
down.
Remote control unit
[
]
No function.
Switches between playback and pause.
No function.
[
]
]
[
[
]
DUAL ZONE
FUNC
]
Turns mute on and off.
[MUTE]
[
],[
[
[
],[
]
[ISR]
Recalls ISR radio station in memory.
]
BAND
Press and hold for 2 seconds or longer: Stores current station into ISR memory (radio mode only).
Press and hold the button for 1 second or longer to switch the main and sub zone sound
source.(only while dual zone mode on)
[
]
ISR
[
]
[
[
]
DISP
MUTE
Switches among main display, clock display.
[DISP]
]
[
]
RDM
SCN
[SCN]
Scan play.
Preset scan.
Preset scan.
Scan play.
Press and hold the
button for 1 second
or longer to perform
folder scan play while
in the MP3/WMA
mode.
When pressed and
held for 2 seconds:
Auto store.
When pressed and
held for 2 seconds:
Auto store.
When pressed and
held for 1 second:
Disc scan play.
[
]
RPT
[RPT]
Repeat play.
No function.
No function.
No function.
Repeat play.
Press and hold the
button for 1 second
or longer to perform
folder Repeat play
while in the
When pressed and
held for 1 second:
Disc repeat play.
Inserting the Batteries
1.Turn the remote control unit over, then slide the
rear cover in the direction of the arrow.
MP3/WMA mode.
AA (SUM-3, IECR-6/1.5V)
Batteries
2.Insert the AA (SUM-3, IECR-6/1.5V) batteries
that came with the remote control unit facing in
the directions shown in the figure, then close the
rear cover.
[RDM]
Random play.
Switches between TV
and VTR.
Random play.
Press and hold the
button for 1 second
or longer to perform
folder Random play
while in the
When pressed and
held for 1 second:
Disc random play.
Notes:
Using batteries improperly can cause them to
explode. Take note of the following points:
MP3/WMA mode.
Rear cover
[DUAL
ZONE]
Press and hold for 1 second or longer to turn on or off the dual zone mode.
Press to switch the control zone between main zone or sub zone while dual zone mode on.
• When replacing batteries, replace both batteries
with new ones.
∗ Some of the corresponding buttons on the main unit and remote control unit have different functions.
• Do not short-circuit, disassemble or heat batteries.
• Do not dispose of batteries into fire or flames.
• Dispose of spent batteries properly.
Rear side
10
DXZ735MP
DXZ735MP
11
Basic Operations
Adjusting the bass (Gain,
Frequency, Q-curve)
This adjustment can be performed when the Z-
Enhancer Plus is set to “CUSTOM”.
7. OPERATIONS
Basic Operations
“Z+ OFF” ➜ “BASS BOOST” ➜ “IMPACT” ➜
“EXCITE” ➜ “CUSTOM” ➜ “Z+ OFF” ...
Note:Be sure to read this chapter referring to the front diagrams of
chapter “3. CONTROLS” on page 5 (unfold).
• BASS BOOST
• IMPACT
: bass emphasized
: bass and treble empha-
sized
Adjusting the volume
Turning the [ROTARY] knob clockwise increases
the volume; turning it counterclockwise de-
creases the volume.
∗ The volume level is from 0 (minimum) to 33 (maxi-
CAUTION
Be sure to lower the volume before switch-
1. Press the [A-M] button and select “BASS”.
• EXCITE
: bass and treble empha-
sized mid de-emphasized
2. Turning the [ROTARY] knob clockwise em-
phasizes the bass; turning it counterclock-
wise attenuates the bass.
ing off the unit power or the ignition key. The
unit remembers its last volume setting. If you
switch the power off with the volume up,
when you switch the power back on, the sud-
den loud volume may hurt your hearing and
damage the unit.
• CUSTOM
• Z+ OFF
: user custom
mum).
Å
Î
∗ The factory default setting is “B GAIN 0 ”.
: no sound effect
(Adjustment range: –6 to +8)
3. Press the [d] or [a] button to select
Switching the display
Press the [D] button to select the desired display.
Adjusting the Z-Enhancer Plus
1. Press the [Z+] button and select the Z-En-
hancer Plus mode to adjust.
Å
Î
“B FREQ 50 ”.
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
Each time you press the [D] button, the display
switches in the following order:
Turning on/off the power
Note:
• Be careful about using this unit for a long time
without running the engine. If you drain the car’s
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
2. Press the [A-M] button and turning the
[ROTARY] knob clockwise adjusts in the +
direction; tuning it counterclockwise adjusts
in the – direction.
Å
Î
∗ The factory default setting is “B FREQ 50 ”.
Main display
Clock display
Main display
(Adjustment 50/80/120 Hz)
Å
Î
4. Press the [d] or [a] button to select “B Q 1 ”.
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the Q-curve.
●When “B-BOOST 0” selected, you can ad-
just the bass in the range of –3 to 3.
1. Press the [FNC] button.
Å
Î
∗ The factory default setting is “B Q 1 ”.
●When “IMPACT 0” selected, you can adjust
the bass and treble in the range of –3 to 3.
(Adjustment 1/1.25/1.5/2)
2. The illumination and display on the unit light
up. The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.
5. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
●When “EXCITE 0” selected, you can adjust
the bass and treble in the range of –3 to 3.
∗ When Z-Enhancer Plus is selected, press and
hold the [Z+] button for 1 second or longer to
change to the “CUSTOM” mode.
Bass/treble characteristics become flat and
the indication “Z+FLAT” is shown in the dis-
play.
3. Press and hold the [FNC] button for 1 second
or longer to turn off the power for the unit.
Note:
Adjusting the treble (Gain,
Frequency)
This adjustment can be performed when the Z-
Enhancer Plus is set to “CUSTOM”.
∗ Once selected, the preferred display becomes
the display default. When a function adjust-
ment such as volume is made, the screen will
momentarily switch to that function’s display,
then revert back to the preferred display sev-
eral seconds after the adjustment.
• System check
The first time this unit is turned on after the wire
connections are completed, it must be checked
what equipment is connected. When the power is
turned on, “SYSTEM CHK” and “Push POWER”
appear in the display alternately, so press the
[FNC] button. The system check starts within the
unit. When the system check is complete, press
the [FNC] button again.
1. Press the [A-M] button and select “TREBLE”.
Adjusting the tone
Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes as following order:
2. Turning the [ROTARY] knob clockwise em-
phasizes the treble; turning it counterclock-
wise attenuates the treble.
∗ When you have entered a title in a CD, it ap-
pears in the main display. If you have not en-
tered a title, “NO TITLE” appears in the title
display instead. For information on how to en-
ter a title, refer to the subsection “Entering
titles” in section “Operations Common to
Each Mode”.
Å
Î
∗ The factory default setting is “T GAIN 0 ”.
●When “BASS BOOST” is set
(Adjustment range: –6 to +6)
“B-BOOST” ➜ “BAL 0” ➜ “FADER 0” ➜
Last function mode.
3. Press the [d] or [a] button to select
Selecting a mode
1. Press the [FNC] button to change the opera-
tion mode.
Å
Î
“T FREQ 12K ”.
●When “IMPACT” is set
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
“IMPACT” ➜ “BAL 0” ➜ “FADER 0” ➜ Last
function mode.
2. Each time you press the [FNC] button, the
operation mode changes in the following or-
der:
Setting the Z-Enhancer Plus
Å
Î
∗ The factory default setting is “T FREQ 12K ”.
This unit are provided with 3 types of sound tone ef-
fects stored in memory. Select the one you prefer.
(Adjustment 8 kHz/12 kHz)
●When “EXCITE” is set
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Radio mode ➜ CD/MP3/WMA mode ➜ CD
changer mode ➜ MD changer mode ➜ DVD
changer mode ➜ TV mode ➜ AUX mode ➜
Radio mode...
∗ External equipment not connected with
CeNET is not displayed.
“EXCITE” ➜ “BAL 0” ➜ “FADER 0” ➜ Last
function mode.
∗ The factory default setting is “Z+ OFF”.
Each time you press the [Z+] button, the tone ef-
fect changes in the following order:
●When “CUSTOM” is set
“BASS” ➜ “TREBLE” ➜ “BAL 0” ➜ “FADER
0” ➜ Last function mode.
●When “Z+ OFF” is set
“BAL 0” ➜ “FADER 0” ➜ Last function
mode.
12
DXZ735MP
DXZ735MP
13
Basic Operations
Radio Operations
Radio Operations
Adjusting the balance
FM reception
Manual tuning
Auto store
®
1. Press the [A-M] button and select “BAL 0”.
For enhanced FM performance the
There are 2 ways available: Quick tuning and
step tuning.
Auto store is a function for storing up to 6 sta-
tions that are automatically tuned in sequentially.
If 6 receivable stations cannot be received, a
previously stored station remains unoverwritten
at the memory position.
tuner includes signal actuated stereo control,
Enhanced Multi AGC, Impulse noise reduction
curcuits and Multipath noise reduction circuits.
2. Turning the [ROTARY] knob clockwise em-
phasizes the sound from the right speaker;
turning it counterclockwise emphasizes the
sound from the left speaker.
When you are in the step tuning mode, the fre-
quency changes one step at a time. In the quick
tuning mode, you can quickly tune the desired
frequency.
1. Press the [BND] button and select the de-
∗ The factory default setting is “BAL 0”. (Adjust-
ment range: L13 to R13)
Listening to the radio
1. Press the [FNC] button and select the radio
mode. The frequency in the display.
sired band (FM or AM).
1. Press the [BND] button and select the de-
sired band (FM or AM).
2. Press and hold the [P/A] button for 2 sec-
onds or longer. The stations with good recep-
tion are stored automatically to the preset
channels.
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
∗ If “MANU” is not lit in the display, press and
hold the [BND] button for 1 second or longer.
“MANU” is lit in the display and manual tuning
is now available.
2. Press the [BND] button and select the radio
band. Each time the button is pressed, the ra-
dio reception band changes in the following
order:
Adjusting the fader
1. Press the [A-M] button and select “FADER 0”.
2. Tune into a station.
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
Preset scan
Preset scan receives the stations stored in pre-
set memory in order. This function is useful
when searching for a desired station in memory.
●Quick tuning:
3. Press the [a] or [d] button to tune in the
2. Turning the [ROTARY] knob clockwise em-
phasizes the sound from the front speakers;
turning it counterclockwise emphasizes the
sound from the rear speakers.
Press and hold the [a] or [d] button for 1
desired station.
second or longer to tune in a station.
●Step tuning:
1. Press the [P/A] button.
Tuning
Press the [a] or [d] button to manually
∗ The factory default setting is “FADER 0”. (Ad-
justment range: F12 to R12)
2. When a desired station is tuned in, press the
[P/A] button again to continue receiving that
station.
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
tune in a station.
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Note:
Recalling a preset station
Seek tuning
1. Press the [BND] button and select the de-
sired band (FM or AM).
• Be careful not to press and hold the [P/A] button
for 2 seconds or longer, otherwise the auto store
function is engaged and the unit starts storing
stations.
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio sta-
tions in memory. Pressing the corresponding
[DIRECT] button recalls the stored radio fre-
quency automatically.
Adjusting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust
the low sound area like the normal sound ad-
justment function, but emphasizes the deep
bass sound area to provide you with a dynamic
sound.
∗ If “MANU” is lit in the display, press and hold
the [BND] button for 1 second or longer.
“MANU” in the display goes off and seek tun-
ing is now available.
Instant station recall (ISR)
1. Press the [BND] button and select the de-
Instant station recall is a special radio preset
that instantly accesses a favorite radio station at
a touch of a button. The ISR function even oper-
ates with the unit in other modes.
sired band (FM or AM).
2. Press the [a] or [d] button to automatically
2. Press the corresponding [DIRECT] button to
seek a station.
∗ The factory default setting is off.
recall the stored station.
When the [d] button is pressed, the station is
sought in the direction of higher frequencies; if
the [a] button is pressed, the station is sought
in the direction of lower frequencies.
1. Press and hold the [A-M] button for 1 sec-
ond or longer to turn on the MAGNA BASS
EXTEND effect. “M-B EX” lights in the dis-
play.
∗ Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store that station
into preset memory.
●ISR memory
1. Select the station that you wish to store in ISR
memory.
2. Press and hold the [I] button for 2 seconds or
2. Press and hold the [A-M] button for 1 second
or longer to turn off the MAGNA BASS EX-
TEND effect. “M-B EX” goes off from the dis-
play.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
longer.
●Recalling a station with ISR
In any mode, press the [I] button to turn on the
radio function and tune the selected radio sta-
tion. “ISR” appears in the display. Press the [I]
button again to return to the previous mode.
2. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
Adjusting the subwoofer
When you default select one of mode
(LPF50Hz, LPF80Hz, LPF120Hz).
∗ The factory default setting is “SW-VOL 0”.
(Adjustment range: –6 to +6)
1. Press the [SW-VOL ] button to select the
subwoofer volume increases or decreases.
2. Press and hold the [SW-VOL ] button, the
subwoofer volume automatically increases or
decreases.
14
DXZ735MP
DXZ735MP
15
CD/MP3/WMA Operations
CD/MP3/WMA Operations
2. Files without MP3/WMA data will not play.
The indication “––:––” appears in the play
time display if you attempt to play files with-
out MP3/WMA data.
When the unit enters the CD/MP3/WMA mode,
play starts automatically.
MP3/WMA
What is MP3?
MP3 is an audio compression method and clas-
sified into audio layer 3 of MPEG standards.
This audio compression method has penetrated
into PC users and become a standard format.
Setting
Set to CD
Set to MP3/WMA
Disc
Mixed with CD and
MP3/WMA type tracks
If there is no disc loaded, the indication “NO
DISC” appears in the title display.
∗ The mode changes each time the [FNC] button is
pressed. (Modes are not displayed for equipment
that is not connected.)
Play CD
Play MP3/WMA
● Logical format (File system)
CD type track only Play CD
Play CD
1. When writing MP3/WMA file on a CD-R disc
or CD-RW disc, please select “ISO9660 level
1, 2, 3 or JOLIET or Romeo” as the writing
software format. Normal play may not be pos-
sible if the disc is recorded on another format.
MP3/WMA type track only Play MP3/WMA Play MP3/WMA
This MP3 features the original audio data com-
pression to about 10 percent of its initial size
with a high sound quality. This means that about
10 music CDs can be recorded on a CD-R disc
or CD-RW disc to allow a long listening time
without having to change CDs.
2. After making these settings, remove the disc
and then reinsert it.
CD/MP3/WMA
(CD changer)
(MD changer)
(DVD changer)
Radio
3. When a mixed mode CD is loaded and CD is
set, the track to be played first is MP3/WMA
file data and no sound is heard.
2. The folder name and file name can be dis-
played as the title during MP3/WMA play but
the title must be within 128 single byte alpha-
betical letters and numerals (including an ex-
tension).
(TV)
AUX
Disc-In-Play function
What is WMA?
WMA is the abbreviation of Windows Media Au-
dio, an audio file format developed by Microsoft
Corporation.
As long as the ignition key is turned to the ON or
ACC position, this function allows you to turn the
power to the unit and start playing the disc auto-
matically when the disc is inserted even if the
power is not turned on.
Loading a CD
1. Press the [OPEN] button to access the CD
3. Do not affix a name to a file inside a folder
having the same name.
SLOT behind the FLIP DOWN PANEL.
● Folder structure
1. A disc with a folder having more than 8 hier-
archical levels will be impossible.
Notes:
2. Insert a CD into the center of the CD SLOT
with the label side facing up. The CD plays
automatically after loading.
• If you play a file with DRM (Digital Rights Man-
agement) for WMA remaining ON, no audio is
output.
• Windows Media™, and the Windows ® logo are
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
● Number of files or folders
1. Up to 255 files can be recognized per folder.
Up to 500 files can be played.
CAUTION
Notes:
• Do not try to put your hand or fingers in the
disc insertion slot. Also never insert for-
eign objects into the slot.
• Never insert foreign objects into the CD SLOT.
•
If the CD is not inserted easily, there may be another
CD in the mechanism or the unit may require service.
2. Tracks are played in the order that they were
recorded onto a disc. (Tracks might not always
be played in the order displayed on the PC.)
• Do not insert discs where adhesive comes
out from cellophane tape or a rental CD la-
bel, or discs with marks where cellophane
tape or rental CD labels were removed. It
may be impossible to extract these discs
from the unit and they may cause the unit
to break down.
●
To disable DRM (Digital Rights Management):
• Discs not bearing the
or
mark and
CD-ROMs cannot be played by this unit.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
Loading 8 cm compact discs
∗ No adapter is required to play an 8 cm CD.
1. When using Windows Media Player 7, click
on TOOLS ➜ OPTIONS ➜ CD AUDIO;
there, uncheck the ENABLE PERSONAL
RIGHTS MANAGEMENT check box, then
construct files.
3. Some noise may occur depending on the type
of encoder software used while recording.
Multisession function
When a disc contains both normal CD type tracks
and MP3/WMA type tracks mixedly, you can se-
lect which type of the recorded tracks to play.
2. When using Windows Media Player for Win-
dows XP 8, click on TOOLS ➜ OPTIONS ➜
COPY MUSIC tab, then under COPY SET-
TINGS, unclick the check box for PROTECT
CONTENT. Thereafter, reconstruct files.
∗
Insert the 8 cm CD into the center of the insertion slot.
3. Close the FLIP DOWN PANEL.
Backup Eject function
Just pressing the [Q] button ejects the disc
even if the power to the unit was not turned on.
● Default value is “CD”.
CAUTION
Each time you press and hold the [BND] button
for about 1 second, the mixed mode is switched
between CD type or MP3/WMA type. The follow-
ing indication appears in the title display when
switching the track type to be played.
Be careful not to catch your hand or fingers
while closing the FLIP DOWN PANEL.
Personally constructed WMA files are used
at your own responsibility.
1. Press the [OPEN] button to open the FLIP
DOWN PANEL.
Note:
Notes:
• If the FLIP DOWN PANEL will not open far
enough, open it gently with your hand.
• If the FLIP DOWN PANEL does not open fully,
gently open with your hand.
• After loading a CD, always close the FLIP DOWN
PANEL.
Precautions when creating MP3/WMA disc
● Usable sampling rates and bit rates:
● Display when CD type track is selected:
2. Press the [Q]button. Remove the disc after it
1. MP3: Sampling rate 8k Hz-48 kHz,
Bit rate: 8 kbps-320 kbps / VBR
2. WMA: Bit rate 48 kbps-192 kbps
● File extensions
is ejected.
3. Close the FLIP DOWN PANEL.
Note:
Pausing play
1. Press the [
• Always close the FLIP DOWN PANEL once you
take out the disc.
] button to pause play.
● Display when MP3/WMA type track is se-
lected:
1. Always add a file extension “.MP3” or “.WMA”
to MP3 or WMA file by using single byte let-
ters. If you add a file extension other than
specified or forget to add the file extension ,
the file cannot be played.
“PAUSE” appears in the display.
2. To resume CD play, press the [
again.
] button
Listening to a disc already loaded
in the unit
Press the [FNC] button to select the CD/MP3/
WMA mode.
1. Types of recording that can be played are as
follows.
16
DXZ735MP
DXZ735MP
17
CD/MP3/WMA Operations
CD/MP3/WMA Operations
∗ Scan play starts from the next track after the
track currently being played.
2. To cancel folder repeat play, press the [RPT]
Displaying CD titles
Folder Select
button again.
This unit can display title data for CD-text/MP3/
WMA disc and user titles input with this unit.
This function allows you to select a folder con-
taining MP3/WMA files and start playing from
the first track in the folder.
2. To cancel scan play, press the [SCN] button
The play status indications such “FOLDER”
and “RPT” disappear from the display and
normal play resumes from the track currently
being played.
again.
1. Press the [D] button to display the title.
The play status indication such as “SCN” dis-
appears from the display and the current
track is played.
1. Press [DN] or [UP] button.
2. Each time you press and hold the [D] button
for 1 second or longer, the title display
changes in the following order:
Pressing [DN] button to the previous folder.
Pressing [UP] button to the next folder.
Random play
User title (disc) ➜ CD-text title (disc) ➜ Artist
name ➜ CD-text title (track) ➜ User title (disc)...
1
Folder scan play
This function allows you to play all tracks re-
corded on a disc in a random order.
This function allows you to locate and play the
first 10 seconds of the first track of all the folders
on an MP3/WMA disc.
Folder ➜ File ➜ Album TAG ➜ Artist TAG ➜
Title TAG ➜ Folder...
Notes:
• If the CD playing is not a CD-text CD or no user
title has been input, “NO TITLE” appears in the
display.
• If MP3/WMA disc is not input TAG, “NO TAG” ap-
pears in the display.
• For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0.
• Tag displays give priority to V2.3 / 2.2.
Root folder
1. Press the [RDM] button to perform random
2
play.
1. Press and hold the [SCN] button for about 1
The indication “RDM” lights up in the display
and “TRK RANDOM” (or “ -RANDOM” when
performing random play for tracks on a MP3/
WMA disc) appears in the title display for about
2 seconds, and then random play starts. The
tracks on the disc are then played in a random
order.
second to folder scan play.
The indications “FOLDER” and “SCN” light
up in the display and “ -SCAN” appears for
about 2 seconds in the title display, and then
folder scan play starts.
∗ Folder scan play starts from the next track af-
ter the track currently being played.
3
4
• In the case of album Tags for WMA, the informa-
tion written into the extension header is displayed.
• Only ASCII characters can be displayed in Tags.
2. To cancel random play, press the [RDM] but-
ton again.
2. To cancel folder scan play, press the [SCN]
button again.
The play status indication such as “RDM” dis-
appears from the display and normal play re-
sumes from the track currently being played.
The play status indications such as
“FOLDER” and “SCN” disappear from the
display and the current track is played.
Selecting a track
●Track-up
5
1. Press the [d] button to move ahead to the
Folder random play
This function allows you to play all the tracks of
all the folders recorded on an MP3/WMA disc in
a random order.
beginning of the next track.
Repeat play
This function allows you to play the current track
repeatedly.
∗ Press [UP] button while in the final folder to
shift to the first folder.
2. Each time you press the [d] button, the
track advances ahead to the beginning of the
next track.
∗ Folder without an MP3/WMA file is not select-
able.
1. Press and hold the [RDM] button for about 1
1. Press the [RPT] button to perform repeat play.
●Track-down
2. To select a track, press the [a] or [d] of
second to perform folder random play.
The indication “RPT” lights up in the display
and “TRK REPEAT” (or “ -REPEAT” when
performing repeated play for a track in the
MP3/WMA file) appears for about 2 seconds
in the title display, and then repeat play starts.
1. Press the [a] button to move back to the
button.
The indications “FOLDER” and “RDM” light
up in the display and “ -RANDOM” appear
in the title display for about 2 seconds, and
then folder random play starts.
beginning of the current track.
2. Press the [a] button twice to move to the
Top function
The top function resets the CD player to the first
track of the disc. Press the [BND] button to play
the first track (track No. 1) on the disc.
∗ In case of MP3/WMA, the first track of a folder be-
ing played will be returned.
beginning of the previous track.
2. To cancel folder random play, press the
2. To cancel repeat play, press the [RPT] button
[RDM] button again.
again.
Fast-forward/fast-backward
●Fast-forward
The play status indications such as
“FOLDER” and “RDM” disappear from the
display and normal play resumes from the
track currently being played.
The play status display such as “RPT” disap-
pears from the display and normal play re-
sumes from the track currently being played.
Press and hold the [d] button for 1 second or
longer.
●Fast-backward
Scan play
This function allows you to locate and play the
first 10 seconds of all the tracks recorded on a
disc.
Press and hold the [a] button for 1 second or
Folder repeat play
This function allows you to play a track currently
being played in the MP3/WMA folder repeatedly.
longer.
∗ For MP3/WMA discs, it takes some time until the
start of searching and between tracks. In addition,
the playing time may have a margin of error.
1. Press the [SCN] button to perform scan play.
1. Press and hold the [RPT] button for about 1
second to perform folder repeat play.
The indication “SCN” lights up in the display,
and “TRK SCAN” (or “ -SCAN” when
searching for a track in the MP3/WMA file)
appears in the title display for about 2 sec-
onds, then scan play starts.
The indications “FOLDER” and “RPT” light
up in the display and “ -REPEAT” appears
for about 2 seconds in the title display, and
then folder repeat play starts.
18
DXZ735MP
DXZ735MP
19
CD/MP3/WMA Operations
Operations Common to
Each Mode
Operations Common to Each Mode
7. Repeat step 4 to 6 to enter up to 30 charac-
ters for message.
2. Press the [a] or [d] button to select
Play list mode
This function allows you to play tracks, up to lat-
est 5 time stamps, by reading the play list infor-
mation written on the disc.
“DIMMER”.
Turning the screen saver function
on or off
This unit is provided with the screen saver func-
tion which allows you to show various kinds of
patterns and characters in the Operation Status
indication area of the display in a random order.
You can turn on and off this function.
8. Press and hold the [
] button for 2 sec-
3. Turn the [ROTARY] knob clockwise to “ON”
onds or longer to store the message in
memory and cancel input message.
or counterclockwise to “OFF”.
4. Press the [T] button to return to the previous
1. Press and hold the [PLAY LIST] button for 1
second or longer to turn on or off the play list
mode.
9. Press the [T] button to return to the previous
mode.
mode.
∗ Play list play is possible only when there is a
file whose extension is “.M3U” or “.ASX” on
the CDR-RW.
Adjusting the display contrast
You can adjust the display contrast to match the
angle of installation of the unit.
∗ The factory default setting is “6”. (Adjustment
level:1to 11)
Message display
When the unit is powered on or off, a message
is displayed. The user can turn this message
display ON or OFF.
If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
∗ Up to 5 play lists can be recognized, and up to
255 files can be recognized per play list.
2. Press the [a] or [d] buttons to change the
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
∗ The factory default setting is “ON”.
track.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
∗ The factory default setting is “ON”.
3. Press [DN] button to move to the previous
play list.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select
Press [UP] button to move to the next play list.
Notes:
• The SCN/RPT/RDM functions cannot be used
while in the play list mode.
• The title display changes from folder name to play
list name.
“CONTRAST”.
2. Press the [a] or [d] button to select
3. Turn the [ROTARY] knob clockwise or coun-
“MESSAGE”.
2. Press the [a] or [d] button to select
terclockwise to adjust the contrast.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to set the message display ON
or OFF.
“SCRN SVR”.
4. Press the [T] button to return to the previous
3. Press the [
] button.
mode.
4. Turn the [ROTARY] knob clockwise or coun-
terclockwise to select the setting. Each time
you turn the [ROTARY] knob, the setting
changes in the following order:
4. Press the [T] button to return to the previous
Anti-theft indicator
The red Anti-theft indicator is a function for pre-
venting theft. When the DCP is removed from
the unit, this indicator blinks.
mode.
Making a play list
1. Write desired tracks to a CD-R/RW, etc. Be
sure to use alphanumeric/ASCII characters
for all file names.
OFF ➜ ON ➜ MESSAGE
Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA Title
or MD.
5. Press the [
] button to store the setting.
∗ The factory default setting is “OFF”.
2. Make a play list by using a multimedia player,
etc. and save the data. The file format must
be M3U or ASX.
6. Press the [T] button to return to the previous
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
mode.
∗ The factory default setting is “ON”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
3. Again, write this play list to the CD-R/RW,
etc.
Notes:
• When writing to a CD-R/RW, etc., be sure to use
alphanumeric/ASCII characters.
• Up to 5 layers can be recognized as a list. For
written play lists, latest 5 lists are recognized in
the order in which they are written.
• When writing to a CD-R/RW, etc., turn off the Disc
At Once function.
Entering MESSAGE INFORMATION
When the use of the message is selected for the
screen saver setting, you can change the con-
tents of the message.
2. Press the [a] or [d] button and select
“BLINK LED”.
2. Press the [a] or [d] button to select
3. Turn the [ROTARY] knob clockwise to set this
function “ON” or turn it counterclockwise to
switch this function “OFF”.
“AUTO SCRL”.
3. Turn the [ROTARY] knob clockwise or coun-
∗ Up to 30 characters can be entered.
terclockwise and select “ON” or “OFF”.
∗ The factory default setting is “Welcome to Clarion”.
4. Press the [T] button to return to the previous
● ON:
mode.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
To scroll automatically.
● OFF:
Setting LOW PASS FILTER
∗ The factory default setting is “LPF 120Hz”.
• When adding a play list, it is recommended to
write it in the “Root” folder.
2. Press the [a] or [d] button to select
To scroll just 1 time when the title was
changed or the title key was pressed.
“MSG INPUT”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
3. Press the [
] button.
4. Press the [T] button to return to the previous
4. Press the [a] or [d] button to move the
mode.
cursor.
2. Press the [a] or [d] button to select
“SUB-W LPF”.
5. Press the [D] button to select a character.
Each time you press the [D] button, the char-
acter changes in the following orders:
Dimmer control
You can setting the dimmer control on or off.
∗ The factory default setting is “ON”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to select the setting. Each time
you turn the [ROTARY] knob, the setting
changes in the following order:
Capital letters ➜ Small letters ➜ Numbers
and Symbols ➜ Umlaut ➜ Capital letters…
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
REAR ➜ LPF 50Hz ➜ LPF 80Hz ➜ LPF
120Hz
6. Turn the [ROTARY] knob to select the de-
sired character.
20
DXZ735MP
DXZ735MP
21
Operations Common to Each Mode
Operations Common to Each Mode
4. Press the [T] button to return to the previous
●Setting COLOR SCAN mode
3. Press the [D] button and display the main.
(for example Sirius digital tuner CD/MD/DVD
changer TV(VTR) Aux) at same time.
mode.
As selecting “COLOR SCAN”, the color auto-
4. Press the [T] button.
matically changes.
Each of 2 sound sorces output to 2 listening
zones. they are called main zone and sub zone.
Main zone source is output from vehcle speak-
ers and sub zone source is output from wireless
head phone system WH100/200 (sold
seperately).
5. Press the [a] or [d] button to move the
∗ The factory default setting is “COLOR SCAN”.
∗ After 3 second the color changes to the other.
●Setting USER mode
Selecting AUX IN sensitivity
Make the following settings to select the sensi-
tivity when sounds from external devices con-
nected to this unit are difficult to hear even after
adjusting the volume.
cursor.
6. Press the [D] button to select a character.
Each time you press the [D] button, the char-
acter changes in the following order:
The factory default setting is “R>8 G>8”.
Capital letters ➜ Small letters ➜ Numbers
and Symbols ➜ Umlaut ➜ Capital letters…
As selecting “USER”, press and hold the
[COLOR] button 1 second or longer “R>8 G>8”
appears in the display.
Notes:
∗ The factory default setting is “MID”.
• Simultaneous use of internal sound souces or
use of external sound sources are not available
except Aux.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
7. Turn the [ROTARY] knob to select the de-
sired character.
1. Press the [a] or [d] button to move the
• TV tuner mode automaticaly select VTR input.
8. Repeat steps 5 to 7 to enter up to 10 charac-
ters for the title.
cursor.
2. Press the [a] or [d] button to select
• ISR function is not operating while Dual zone ON.
• Audio mode and Z-enhancer function only avail-
able in main zone.
• Color setting are possible to both main and sub
zone indpependently.
2. Turn the [ROTARY] knob clockwise or coun-
“AUX SENS”.
terclockwise to select from 0 to 8.
9. Press and hold the [
] button for 2 sec-
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise as needed and select from
“HIGH”, “MID” or “LOW”.
onds or longer to store the title into memory
and cancel title input mode.
3. Press and hold the [
] button for 2 sec-
onds or longer to store the color in memory
and cancel setting mode.
4. Press the [T] button to return to the previous
Clearing titles
COLOR
RED
R
8
8
8
8
8
6
4
2
0
G
0
1
2
4
6
8
8
8
8
Dual zone operation
mode.
1. Select and play a CD in the CD changer or
tune in to a TV station for which you want to
clear the title.
Factory default setting is Dual zone OFF, Dual
zone operation mode is main zone, sub zone
function is Aux.
MANDARIN
ORANGE
AMBER
YELLOW
Y-GREEN
LIME
Setting the clock
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [D] button and display the main.
3. Press the [T] button.
Turning on/off the dual zone mode
1. Press and hold the [DZ] button for 1 second
or longer to turn on or off the dual zone mode.
“DUAL ZONE” indicator appears in the dis-
play.
The display switches to the title input display.
2. Press the [a] or [d] button to select
4. Press the [BND] button.
“CLOCK”.
3. Press the [
] button.
5. Press and hold the [
] button for 2 sec-
GREEN
D-GREEN
ond or longer to clear the title and cancel title
input mode.
4. Press the [a] or [d] button to select the
hour or the minute.
Select the function
5. Turn the [ROTARY] knob clockwise or coun-
Entering titles
terclockwise to set the correct time.
∗ The clock is displayed in 12-hour format.
Triggered audio mute for cellular
1. Press the [DZ] button to switch the control
zone between main zone or sub zone.
Titles up to 10 characters long can be stored in
memory and displayed for CD, CD changer and
TV stations. The number of titles that can be en-
tered for each mode are as follows.
telephones
This unit requires special wiring to mute the au-
dio signal automatically when a cellular tele-
phone rings in the car.
∗ This function is not compatible with all cellular tele-
phones Contact your local authorized Clarion dealer
for information on proper installation and compat-
ibility.
2. Press the [FNC] button to select the function
6. Press the [
memory.
] button to store the time into
in the control zone.
7. Press the [T] button to return to the previous
mode.
Note:
Mode
Number of titles
50 titles
Volume control
Only a main zone is possible for volume control.
volume control of sub zone is only by wireless
head phone system WH100/200.
CD mode
TV mode
Tuner mode
20 titles
30 titles
•
You cannot set the clock when it is displayed with
only the ignition on. If you drain or remove the
car’s battery or take out this unit, the clock is reset.
While setting the clock, if another button or opera-
tion is selected, the clock set mode is canceled.
1. Turn the [ROTALY] knob clockwise or coun-
terclockwise to main zone volume increase
or decrease.
CD changer mode
DCZ625 connected
CDC655Tz connected
CDC1255z connected
Number of titles
100 titles
AUX function
This system has an external input jack so you
can listen to sounds and music from external
devices connected to this unit.
100 titles
50 titles
Setting the button illumination
Press the [COLOR] button to select a color type.
Each time you press the [COLOR] button, the
type changes in the following order:
Reverse function
This unit can switch the Sound sorce between
main or sub zone.
1. Press the [FNC] button to select the mode
you want to enter a title (TUNER, CD, CD
changer or TV).
Dual zone
Dual zone function is operating 2 sound sorces
at same time for multi users. This unit can con-
trol and output the internal sound source (for ex-
ample, Tuner CD/MP3/WMAAux) and sound
sorce from external unit connected with Ce-NET
COLOR SCAN ➜ RED ➜ MANDARIN ➜
ORANGE ➜ AMBER ➜ YELLOW ➜ Y-GREEN
➜ LIME ➜ GREEN ➜ D-GREEN ➜ USER ➜
COLOR SCAN…
Press and hold The [I] button to switch the main
and sub zone sound source. “REVERSE” ap-
pears on the display for 2 seconds.
2. Select and play a CD in the CD changer or
tune in to a TV station for which you want to
enter the title.
22
DXZ735MP
DXZ735MP
23
CD/MD Changer Operations
8. OPERATIONS OF ACCESSORIES
CD/MD Changer Operations
Selecting a track
Repeat play
Repeat play continuously plays the current track.
This function continues automatically until it is
cancelled.
●Track-up
1. Press the [d] button to move ahead to the
beginning of the next track.
Notes:
CD/MD changer functions
1. Press the [RPT] button. “RPT” lights in the
2. Each time you press the [d] button, the
track advances ahead to the beginning of the
next track.
• If the CD playing is not a CD-text CD or no user
When an optional CD/MD changer is connected
display and the current track is repeated.
title has been input, “NO TITLE” appears in the
through the CeNET cable, this unit controls all
display.
2. To cancel repeat play, press the [RPT] button
again. “RPT” goes off from the display and
normal play resumes.
CD/MD changer functions. This unit can control
a total of 2 changers.
• If a CD-text CD is not input its disc title or a track
title, “NO TITLE” appears in the display.
●Track-down
1. Press the [a] button to move back to the
Press the [FNC] button and select the CD(MD)
beginning of the current track.
changer mode to start play. If 2 CD(MD) chang-
Switching disc titles and track titles
ers are connected, press the [FNC] button to se-
Disc repeat play
2. Press the [a] button twice to move to the
After all the tracks on the current disc have been
played, disc repeat play automatically replays
the current disc over from the first track. This
function continues automatically until it is can-
celled.
(MD)
beginning of the previous track.
lect the CD(MD) changer for play.
This unit can display disc titles and track titles
already entered on MDs.
∗ Titles cannot be entered for MDs with this unit.
∗ If “NO MAG” appears in the display, insert the maga-
zine into the CD changer. “DISC CHECK” appears
in the display while the player loads (checks) the
magazine.
Fast-forward/fast-backward
●Fast-forward
1. Press [D] button to display the title. The disc
Press and hold the [d] button for 1 second or
1. Press and hold the [RPT] button for 1 second
or longer. “DISC” and “RPT” light in the dis-
play and disc repeat play starts.
∗ If “NO DISC” appears in the display, eject the maga-
zine and insert discs into each slot. Then, reinsert
the magazine back into the CD changer.
title or track title is displayed.
longer.
2. Each time you press and hold the [D] button
for 1 second or longer, the display toggles
between the disc title and the track title.
●Fast-backward
∗ If “NO DISC” appears in the display, load MDs into
the MD changer.
Press and hold the [a] button for 1 second or
2. To cancel disc repeat play, press and hold
the [RPT] button again. “DISC” and “RPT” go
off from the display and normal play resumes
on the current track.
longer.
Note:
Note:
• If an MD is not input its disc title or a track title,
“NO TITLE” appears in the display.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
Scan play
Scan play locates and plays the first 10 seconds
of each track on a disc automatically. This func-
tion continues on the disc until it is cancelled.
∗ The scan play is useful when you want to select a
desired track.
Random play
Random play selects and plays individual tracks
on the disc in no particular order. This function
continues automatically until it is cancelled.
CAUTION
Procedure to scroll a title
CD-ROM discs cannot be played from every
CD changer, it’s depended on the model.
Set “SCROLL” to “ON” or “OFF”.
(The factory default setting is “ON”. Refer to the
subsection “Turning the screen saver function
on or off” in section “Operation common to
each mode”.)
1. Press the [SCN] button to start track scan-
1. Press the [RDM] button. “RDM” lights in the
Pausing play
1. Press the [
ning. “SCN” lights in the display.
display and random play begins.
] button to pause play.
“PAUSE” appears in the display.
2. To cancel the scan play, press the [SCN] but-
ton again. “SCN” goes off from the display
and the current track continues to play.
2. To cancel random play, press the [RDM] but-
ton again. “RDM” goes off from the display
and normal play resumes.
●When set to “ON”
The title is automatically kept scrolling.
●When set to “OFF”
2. To resume play, press the [
] button again.
Press the [T] button to scroll the title.
Disc scan play
Disc random play
Displaying CD titles
Disc scan play locates and plays the first 10 sec-
onds of the first track on each disc in the cur-
rently selected CD (MD) changer. This function
continues automatically until it is cancelled.
The disc random play selects and plays indi-
vidual tracks or discs automatically in no par-
ticular order. This function continues automati-
cally until it is cancelled.
This unit can display title data for CD-text CDs
and user titles input with this unit.
Selecting a DISC
[DN] or [UP] button correspond to a disc load in
the changer.
∗ Title data for CD-text CDs can be displayed with
this unit only when it is connected to CDC655Tz.
∗ Disc scan play is useful when you want to select a
desired CD (MD).
1. Press and hold the [RDM] button for 1 sec-
ond or longer. “DISC” and “RDM” light in the
display and disc random play starts.
●When connected to CDC655z or CDC1255z.
Press the [D] button to display the title.
●When connected to CDC655Tz
1. Press the [DN] or [UP] button to select the
desired disc.
∗ If a CD is not loaded in a slot of magazine, “NO
1. Press and hold the [SCN] button for 1 sec-
ond or longer. “DISC” and “SCN” light in the
display and disc scan play starts.
2. To cancel disc random play, press and hold
the [RDM] button again. “DISC” and “RDM”
go off from the display and normal play re-
sumes from the current track.
DISC” appears in the display.
1. Press the [D] button to display the title.
2. Each time you press and hold the [D] button
for 1 second or longer, the title display
changes in the following order:
2. To cancel disc scan play, press the [SCN]
button again. “DISC” and “SCN” go off from
the display and the current track continues to
play.
User title (disc) ➜ CD-text title (disc) ➜ Artist
title ➜ CD-text title (track) ➜ user title (disc)…
24
DXZ735MP
DXZ735MP
25
TV Operations
TV Operations
TV tuner functions
Manual tuning
Auto store
Setting the TV area
When an optional TV tuner is connected through
the CeNET cable, this unit controls all TV tuner
functions. To watch TV requires a TV tuner and
monitor.
There are 2 ways available: Quick tuning and
step tuning.
Auto store selects 6 TV stations automatically
and stores each one into preset memory.
When you select the TV area (TV reception
area), the TV tuner area setting changes.
When you are in the step tuning mode, the fre-
quency changes one step at a time. In the quick
tuning mode, you can quickly tune the desired
frequency.
If there are not 6 stations with good reception,
stations previously stored in memory remain
and only the strong stations are stored into
memory.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select “TV
Watching a TV
1. Press the [FNC] button and select the TV
1. Press the [BND] button and select the de-
1. Press the [BND] button and select the de-
AREA”.
sired band (TV1 or TV2).
sired TV band (TV1 or TV2).
3. Press the [
] button.
mode.
∗ If “MANU” is not lit in the display, press and
hold the [BND] button for 1 second or longer.
“MANU” lights in the display and manual tun-
ing is now available.
2. Press and hold the [P/A] button for 2 sec-
onds or longer. The stations with good recep-
tion are stored automatically to the preset
channels.
4. Turn the [ROTARY] knob clockwise or coun-
2. Press the [BND] button to select the desired
TV band (TV1 or TV2). Each time the button
is pressed, the input selection toggles be-
tween TV1 and TV2.
terclockwise to select the reception area.
5. Press the [
] button.
6. Press the [T] button to return to the previous
2. Tune into a station.
3. Press the [a] or [d] button to tune in the
mode.
●Quick tuning:
desired TV station.
Preset scan
The above operations are required when a TV
tuner other than TTX7501z is connected.
Press and hold the [a] or [d] button for 1
Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function is useful for searching
for a desired TV station in memory.
second or longer to tune in a station.
Watching a video
●Step tuning:
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12 V video cassette player (VCP) or video cas-
sette recorder (VCR) to the TV tuner input termi-
nal.
Press the [a] or [d] button to manually
tune in a station.
1. Press the [P/A] button.
2. When the desired station is found, press the
[P/A] button again to remain tuned to that
station.
Recalling a preset station
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your favor-
ite TV stations and store them in memory for
later recall.
1. Press the [
2. To return to the TV broadcast, press the
] button.
] button to select VTR.
Note:
• Do not press and hold the [P/A] button for 2 sec-
onds or longer. Doing so will trigger the auto store
function and start storing stations into memory.
[
1. Press the [BND] button and select the de-
Tuning
sired TV band (TV1 or TV2).
There are 3 types of tuning mode available,
Seek tuning, manual tuning and preset tuning.
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
2. To recall a stored TV station, press the de-
sired [DIRECT] button to select that station.
∗ Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
1. Press and hold the [T] button for 1 second or longer
Seek tuning
1. Press the [BND] button and select the de-
sired TV band (TV1 or TV2).
to switch to the adjustment selection display.
2. Press the [a] or [d] button to select “TV
DIVER”.
∗ If “MANU” is lit in the display, press and hold
the [BND] button for 1 second or longer.
“MANU” in the display goes off and seek tun-
ing is now available.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
3. Turn the [ROTARY] knob clockwise to set to
“ON” or counterclockwise to set to “OFF”.
● ON:
2. Press and hold one of [DIRECT] buttons for
2 seconds or longer to store the current sta-
tion into preset memory.
2. Press the [a] or [d] button to automatically
seek a station. Press the [d] button to auto-
matically tune up the frequency band to the
next available TV station; press the [a] but-
ton to automatically tune down.
Sets the diver setting to ON.
● OFF:
Sets the diver setting to OFF.
4. Press the [T] button to return to the previous
mode.
26
DXZ735MP
DXZ735MP
27
9. IN CASE OF DIFFICULTY
10. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Problem
Cause
Fuse is blown.
Measure
Power does not
turn on.
(No sound is
produced.)
Replace with a fuse of the same amperage. If the
fuse blows again, consult your store of purchase.
Cause
Measure
Error Display
ERROR 2
Incorrect wiring.
Consult your store of purchase.
A CD is caught inside the CD deck and is This is a failure of CD deck’s mechanism
not ejected.
and consult your store of purchase.
No sound output Power antenna lead is
1. Turn the unit off.
when operating
the unit with
amplifiers or
power antenna
attached.
shorted to ground or
2. Remove all wires attached to the power antenna
lead. Check each wire for a possible short to
ground using an ohm meter.
excessive current is required
for remote-on the amplifiers
or power antenna.
ERROR 3
ERROR 6
A CD cannot be played due to scratches,
etc.
Replace with a non-scratched,
non-warped-disc.
3. Turn the unit back on.
4. Reconnect each amplifier remote wire to the
power antenna lead one by one. If the amplifiers
turn off before all wires are attached, use an
external relay to provide remote-on voltage
(excessive current required).
A CD is loaded upside-down inside the
CD deck and does not play.
Eject the disc then reload it properly.
Reset button
Turn off the power, then press
Nothing happens The microprocessor has
when buttons are malfunctioned due to noise,
ERROR 2
A CD inside the CD changer is not
loaded.
This is a failure of CD changer’s
mechanism and consult your store of
purchase.
the [OPEN] button and re-
move the DCP.
pressed.
etc.
Press the reset button for
about 2 seconds with a thin
rod.
Display is not
accurate.
ERROR 3
ERROR 6
ERROR H
A CD inside the CD changer cannot be
played due to scratches, etc.
Replace with a non-scratched, non-
warped disc.
DCP or main unit connectors Wipe the dirt off with a soft cloth moistened with
are dirty.
cleaning alcohol.
A CD inside the CD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly.
No sound heard
No sound heard
The speaker protection
circuit is operating.
1. Turn down sound volume. Function can also be
restored by turning the power off and on again.
(Speaker volume is reduced automatically when
the speaker protection circuit operates).
2. If the sound is muted again, consult our service
department.
Displayed when the temperature in the
MD changer is too high and playback has wait for a while to cool off MD changer.
been stopped automatically.
Lower the surrounding temperature and
MP3/WMA files are absent in Write MP3/WMA files onto the disc properly.
a disc.
ERROR 2
An MD inside the MD changer is not
loaded.
This is a failure of MD changer’s
mechanism and consult your store of
purchase.
Files are not recognized as
an MP3/WMA file.
Use MP3/WMA files encoded properly.
File system is not correct.
Use ISO9660 level 1, 2, 3 or JOLIET or Romeo file system.
Clean the compact disc with a soft cloth.
Sound skips or is Compact disc is dirty.
noisy.
ERROR 3
ERROR 6
An MD inside the MD changer cannot be
played due to scratches, etc.
Replace with a non-scratched, non-
warped disc.
Compact disc is heavily
scratched or warped.
Replace with a compact disc with no scratches.
Sound is cut or
skipped.
MP3/WMA files are not
encoded properly.
Use MP3/WMA files encoded properly.
An MD inside the MD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly.
Noise is
generated or
noise is mixed
with sound.
Displayed when a non-recorded MD is
loaded in the MD changer.
Load a pre-recorded MD in the MD
changer.
Sound is bad
directly after
power is turned
on.
Water droplets may form on
the internal lens when the
car is parked in a humid
place.
Let dry for about 1 hour with the power on.
Wrong filename
File system is not correct.
Use ISO9660 level 1, 2, 3 or JOLIET or Romeo file system.
Play list play is
not performed.
File name or extension is not Use alphanumeric/ASCII characters for MP3/WMA file name.
correct. Use “.M3U” or “.ASX” for the file extension of a play list.
28
DXZ735MP
DXZ735MP
29
Error Display
ERROR 2
Cause
Measure
11. SPECIFICATIONS
A DISC inside the DVD changer cannot be
played.
This is a failure of DVD mechanism and con-
sult your store of purchase.
FM Tuner
Audio
ERROR 3
ERROR 6
A DISC cannot be played due to scratches,
etc.
Retry or replace with a non-scratched, non-
warped-disc.
Frequency Range:
87.0 MHz to 108 MHz
Maximum Power Output:
208 W (52 W ✕ 4 ch)
Usable Sensitivity:
9 dBf
Continuous Average Power Output:
17 W ✕ 4, into 4 Ω, 20 Hz to 20 kHz, 1%THD
A DISC inside the DVD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly
Set the correct Parental level.
50dB Quieting Sensitivity:
15 dBf
Bass Control Action (50 Hz/80 Hz/120 Hz):
+16 dB, -12dB
ERROR P
ERROR R
Parental level error
Region code error
Alternate Channel Selectivity:
70 dB
Treble Control Action (8 kHz/12 kHz):
12 dB
Eject the disc and replace correct region
code disc.
Stereo Separation (1 kHz):
35 dB
Line Output Level (CD 1 kHz):
1.8 V
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
Frequency Response ( 3 dB):
30 Hz to 15 kHz
General
Power Supply Voltage:
AM Tuner
Frequency Range:
14.4 V DC (10.8 to 15.6 V allowable), negative
ground
531 kHz to 1602 kHz
Current Consumption:
Less than 15 A, 3A
Usable Sensitivity:
25 µV
Speaker Impedance:
4 Ω (4 Ω to 8 Ω allowable)
CD Player
System:
Weight / Source unit:
2.86 lb. (1.3 kg)
Compact disc digital audio system
Weight / Remote control unit:
1 oz. (30 g) (including battery)
Usable Discs:
Compact disc
Dimensions / Source unit:
7" (Width) ✕ 2" (Height) ✕ 6-3/16" (Depth)
[178 (W) ✕ 50 (H) ✕ 157 (D) mm]
Frequency Response ( 1 dB):
5 Hz to 20 kHz
Dimensions / Remote control unit:
1-3/4" (Width) ✕ 4-5/16" (Height) ✕ 1-1/8"
(Depth)
Signal to Noise Ratio (1 kHz):
100 dBA
Dynamic Range (1 kHz):
95 dB
[44 (W) ✕ 110 (H) ✕ 27 (D) mm]
Harmonic Distortion:
0.01%
Channel Separation (1 kHz):
85 dB
Notes:
• Specifications and design are subject to change without notice for further improvement.
30
DXZ735MP
DXZ735MP
31
|