10
Channel Vision Technology will repair or replace any defect in material or
workmanship which occurs during normal use of this product with new or rebuilt
parts, free of charge in the USA, for ten years from the date of original purchase.
This is a no hassle warranty with no mail in warranty card needed. This warranty
does not cover damages in shipment, failures caused by other products not
supplied by ChannelVisionTechnology, or failures due to accident, misuse, abuse,
or alteration of the equipment. This warranty is extended only to the original
purchaser, and a purchase receipt, invoice, or other proof of original purchase date
willberequiredbeforewarrantyrepairsareprovided.
Mail in service can be obtained during the warranty period by calling (800) 840-
0288 toll free. A Return Authorization number must be obtained in advance and
canbemarkedontheoutsideoftheshippingcarton.
This warranty gives you specific legal rights and you may have other rights (which
vary from state to state). If a problem with this product develops during or after the
warranty period, please contact Channel Vision Technology, your dealer or any
factory-authorizedservicecenter.
Channel Vision products are not intended for use in medical, lifesaving, life
sustaining or critical environment applications. ChannelVision customers using or
selling Channel Vision products for use in such applications do so at their own risk
and agree to fully indemnify Channel Vision for any damages resulting from such
improperuseor sale.
Specifications:
Video In/Out:
Video format:
C
HANNEL
BNC male connector
RS170, NTSC, CCIR or SECAM
6,000V
V
B-201
ISI
O
N
T
M
Surge Suppression:
Transmission distance:
Operation freq. range:
Twisted pair connector:
Common mode rejection:
Wire type:
Max. 1000 ft.
0 to 6MHz
Two screw terminals
60dB
1-pair, UTP Category 5, 5e or 6
1.26” x 0.83” x 0.59”
32mm x 21mm x 15mm
Dimensions:
B-201
1-Camera Passive Video Balun
Specifications subject to change without notice.
234 Fischer Avenue, Costa Mesa, California 92626 USA
(714)424-6500 (800)840-0288 (714)424-6510 fax
email: [email protected]
500-272 rev A
10
|