Blaupunkt LONG BEACH DVD35 User Manual

Radio / DVD / CD / MP3 / WMA

Long Beach DVD35

7 645 680 310

Operating instructions

http://www.blaupunkt.com

CONTROLS

Button to switch the device on/

off and operate the volume

mute feature.

OFF button on the remote con-

trol for switching the device off.

;

AUDIO button.

Adjusts bass, treble, balance,

fader and X-bass.

SRC button to switch sources

between CD/DVD, Tuner, CD

changer (if connected) and

AUX.

button to open the flip-re-

lease control panel.

Volume control.

SETUP button to call up the

setup menu of the DVD player.

BND•TS button.

Short press: Selects the FM

and AM memory banks.

Long press: Starts the FM/AM

Travelstore function.

MENU button to call up the

main menu (root menu) of a

DVD.

ENTER button to confirm menu

entries on DVDs and in the set-

up menu.

DIS•ESC button to change the

display contents, to close the

menus without saving changes.

MUTE button to mute the de-

vice.

Arrow buttons on the remote

control and the device with

identical function.

buttons to start the fast

forward/reverse search, to con-

trol slow-motion in DVD mode.

MENU•OK button

Short press: Calls up the men-

us for basic settings and con-

firms menu entries. Confirms

menu entries in DVD menus.

Long press: Starts the scan

function.

button to start and interrupt

(freeze frame) the DVD play-

back.

GOTO button for direct selec-

tion of playing time or title on a

CD/DVD, selecting playing time,

chapter or title on a DVD.

DEQ button to call up the

equalizer menu.

Buttons 1 - 6.

CONTROLS

DISPLAY button to display

playing time information on the

external display.

AUDIO button to select the au-

dio track of a DVD.

SUB-T button to select the sub-

titles of a DVD.

ANGLE button to select a cam-

era perspective (dependent

upon the DVD).

STOP button to interrupt the

playback.

TV MODE button to switch the

TV standard of the DVD player

to adjust to the external display.

button for up and down

track selection in CD mode and

to select the previous or next

chapter in DVD mode, single-

frame search in DVD mode.

ZOOM button to zoom the im-

age area in/out.

DIMMER button to directly call

up the display menu.

RETURN button to change

back one level in the menu of a

DVD.

AUDIO ONLY button

No function

TITLE button to call up the title

menu of a DVD.

PBC button, playback control.

Numeric keys for direct selec-

tion of chapters and playing

time in DVD mode or MP3

mode.

PLAY MODE button for setting

the repeat mode (REPEAT) of a

CD or DVD.

PROGRAM button to program

the playlist of a CD or DVD.

button to eject the DVD/CD

from the device (visible only

with opened control panel).

A-B button to define and re-

peat a self-defined title of a

DVD/CD.

CONTENTS

Listening to stored stations .......... 18

Scanning receivable stations

Notes and accessories ........... 8

Road safety.................................... 8

Installation...................................... 8

Remote control RC 14 H ............... 8

Installations

(not part of the scope of delivery) .. 9

Activating/deactivating demo mode .. 9

Time-out (time window) .................. 9

(SCAN)........................................ 18

Setting the scanning time............. 18

Programme type (PTY) ................ 18

Optimising radio reception ........... 20

SHARX ........................................ 20

Configuring the display ................ 21

DVD operation ...................... 21

Region code ................................ 21

License ........................................ 22

Switching to DVD mode............... 22

Starting playback ......................... 23

Display ......................................... 23

Fast forward/reverse search ........ 23

Slow motion ................................. 24

Single frame................................. 24

Freeze frame................................ 24

Interrupting playback ................... 24

Skipping a chapter ....................... 25

Repeated playback of a DVD title. 25

Direct selection of a chapter ........ 25

Resuming playback at the start

Detachable control panel ..... 10

Theft protection............................ 10

Detaching the control panel ......... 10

Attaching the control panel .......... 11

Switching on/off ................... 11

Adjusting the volume............ 12

Setting the power-on volume........ 12

Quickly reducing the volume

(Mute) .......................................... 13

Telephone audio/navigation audio ..13

Setting the volume of the

confirmation beep ........................ 14

Automatic sound .......................... 15

Radio mode........................... 15

Adjusting the tuner ....................... 15

Switching to radio mode .............. 16

Switching the RDS function

on or off (FM only) ....................... 16

Selecting the waveband/

of the first title of a DVD............... 26

Displaying subtitles ...................... 26

Selecting the playback language.. 27

Changing the camera perspective .. 27

Zooming in/out of an image area.. 27

memory bank ............................... 16

Tuning into a station ..................... 16

Setting the sensitivity of

station seek tuning ....................... 17

Storing stations ............................ 17

Storing stations automatically

(Travelstore) ................................. 17

CONTENTS

DVD menu............................. 28 CD mode ............................... 37

Displaying the DVD menu ............ 28 Switching to CD mode................. 37

Selecting menu entries ................ 28 Selecting tracks ........................... 37

Exiting the DVD menu .................. 28 Direct track selection with the

Displaying the title menu .............. 28 remote control.............................. 37

Playback of DVD audio ................ 29 Fast track selection...................... 38

Repeated playback of a defined

section of a title............................ 29 Random track play (MIX).............. 39

Programming your favourite track Scanning tracks (SCAN) ............. 39

Fast searching (audible)............... 38

with the remote control ................ 29 Repeating tracks (REPEAT) ......... 39

Repeated playback of a defined

section of a title............................ 40

DVD setup............................. 30

Calling up the setup menu ........... 30

Interrupting playback (PAUSE)..... 40

Performing settings in the

Changing the display ................... 40

setup menu .................................. 30

Displaying CD text ....................... 41

General Setup - general settings . 31

Audio Setup ................................. 32

Video Setup - image settings ....... 32

Programming your favourite track

with the remote control ................ 41

Ejecting a CD .............................. 42

Preferences - preferred settings .. 33

MP3/WMA mode ................... 42

Setting password protection -

Assigning a password.................. 35 Preparing an MP3/WMA CD ....... 42

Exiting the setup menu ................. 36 Switching to MP3 mode............... 44

Setting the display

(internal display)........................... 44

Selecting the directory

on the device ............................... 44

Selecting a track on the device .... 45

Selecting a directory/track

with the remote control ................ 45

Fast search .................................. 46

Random track play – MIX ............. 47

Scanning tracks – SCAN ............. 47

Repeated playback of individual tracks

or entire directories – REPEAT ......... 47

Repeated playback of a defined

section of a title............................ 48

Interrupting playback (PAUSE)..... 48

Selecting MP3 info ...................... 48

Displaying scrolling texts (scroll) .. 49

CONTENTS

CD-changer mode ................ 49 Sound.................................... 54

Switching to CD-changer mode ... 49 Adjusting the bass ....................... 54

Selecting CDs ............................. 49 Adjusting the treble ...................... 54

Selecting tracks ........................... 49 Setting the left/right volume

Fast searching (audible)............... 50 distribution (balance).................... 55

Changing the display ................... 50 Adjusting the front/rear volume

Repeating individual tracks or

distribution (fader)........................ 55

whole CDs (REPEAT) .................. 50

Random track play (MIX).............. 51

Scanning all tracks on all CDs

(SCAN)........................................ 51

Naming CDs ................................ 51

X-BASS ................................. 55

Equalizer ............................... 56

Switching the equalizer on/off ...... 56

Selecting sound presets .............. 56

Selecting vehicle presets ............. 57

Manually adjusting the equalizer... 57

Help adjusting the equalizer ......... 59

CLOCK time .......................... 53

Displaying the time....................... 53

Setting the clock manually ........... 53

Selecting 12/24-hour clock mode ..53

Displaying the time continuously

Adjusting the display settings .60

Adjusting the display brightness... 60

Adjusting the viewing angle.......... 60

when the device is off and the

ignition is on................................. 53

External audio sources ......... 61

Switching the AUX input on/off .... 61

Amplifier/sub-out ................. 62

Switching the internal amplifier

on/off ........................................... 62

Switching the dual zone on/off ..... 62

Specifications ....................... 63

Amplifier ...................................... 63

Tuner............................................ 63

DVD ............................................. 63

CD ............................................... 63

Pre-amp out ................................. 63

Input sensitivity ............................ 63

NOTES AND ACCESSORIES

Notes and accessories

Note that due to road safety, the driv-

er should be viewing videos only

while the vehicle is standing.

Thank you for choosing a Blaupunkt

product. We hope you enjoy using this

new piece of equipment.

Installation

Please read these operating instruc-

tions before using the equipment for

the first time.

If you want to install your car sound

system yourself, please read the instal-

lation and connection instructions that

follow these operating instructions.

The Blaupunkt editors are constantly

working on making the operating in-

structions clearer and easier to under-

stand. However, if you still have any

questions on how to operate the de-

vice, please contact your dealer or the

telephone hotline for your country. You

will find the telephone number printed

at the back of this booklet.

Remote control RC 14 H

When you operate the Long Beach

DVD35 for the first time, you must in-

sert the batteries in the remote con-

trol.

Inserting the batteries

1. Open the battery compartment by

removing the cover.

We provide a manufacturer guarantee

for our products bought within the Eu-

ropean Union. You can view the guar-

antee conditions at www.blaupunkt.de

or ask for them directly at:

2. Battery size: Two AAA batteries,

type LR03 Micro.

Before inserting the batteries, en-

sure that the poles of the battery

are aligned as shown in the bat-

tery compartment.

Blaupunkt GmbH

Hotline

Robert Bosch Str. 200

D-31139 Hildesheim

Insert the batteries.

3. Close the battery compartment.

Road safety

Note:

Exhausted batteries do not belong

in household waste; they should

be disposed of according to local

regulations.

Road safety has absolute

priority. Only operate your car sound

system if the road and traffic

conditions allow you to do so.

Familiarise yourself with the device

before setting off on your journey.

You should always be able to hear

police, fire and ambulance sirens in

good time from inside your vehicle.

For this reason, listen to your car

sound system at a suitable volume

level during your journey.

NOTES AND ACCESSORIES

● External display

Activating the remote control

An external display is required to

view DVD movies and VCDs. You

can obtain further information

about suitable monitors from your

Blaupunkt dealer.

Point the remote control at the infrared

receiver in the front of the device.

Operating angle: Approx. 30° in each

direction from the front side of the IR

receiver in the front of the device.

● Amplifiers

The accompanying remote control al-

lows for operating all the functions of

the DVD mode and controlling the ba-

sic functions of the other operating

modes.

Any Blaupunkt amplifier can be

used.

● CD changers

You can connect the following

Blaupunkt CD changers:

CDC A 03, CDC A 08 and

IDC A 09.

You cannot switch the device on/off

using the accompanying remote con-

trol.

Activating/deactivating demo

mode

Installations

(not part of the scope of delivery)

You can activate the demo mode at the

device. In demo mode, the different

functions of the device are displayed.

Use only accessories approved by

Blaupunkt.

●

Remote controls

➮ Press the MENU•OK button 7.

The RC 10 steering wheel remote

control allows you to access the

most important functions of your

car sound system safely and con-

veniently from your steering

wheel.

The display shows the menu.

➮ Press and hold the MENU•OK

button 7 pressed for more than

four seconds while the menu is

displayed to activate or deactivate

the demo mode.

You cannot switch the device on/

off using the remote control.

Time-out (time window)

The device features a time-out func-

tion.

The RC 13 H cable remote control

and the corresponding adapter al-

lows for controlling the RSA (Rear

Seat Entertainment) in the dual

zone mode. You can obtain further

information from your Blaupunkt

dealer.

For example, if you press the

MENU•OK button 7 and select a

menu item, the device switches back

after approx. 16 seconds after the last

button activation. The settings per-

formed are saved.

CONTROL PANEL

Detachable control panel

Theft protection

The device is equipped with a detach-

able control panel (flip-release panel)

as a way of protecting your equipment

against theft. The device is worthless

to a thief without this control panel.

Detaching the control panel

➮ Press the

button 2.

The control panel opens out towards

you.

➮ Hold the control panel by its right

side and then pull it straight out of

the bracket.

Protect your device against theft by

taking the control panel with you when-

ever you leave your vehicle. Do not

leave the control panel inside your ve-

hicle - not even in a hiding place.

The control panel has been designed

to be easy to use.

Notes:

●

All the current settings are saved.

●

Never drop the control panel.

●

Any inserted DVD/CD remains in

the device.

●

Never expose the control panel to

direct sunlight or other heat sourc-

es.

●

The device switches off automati-

cally after approx. one minute.

●

Avoid direct skin contact with the

control panel’s electrical contacts.

If necessary, please clean the

contacts of the KeyCard with a

lint-free cloth moistened with

cleaning alcohol.

CONTROL PANEL

SWITCHING ON/OFF

Attaching the control panel

Switching on/off

➮ Hold the control panel at approxi-

There are various ways of switching the

device on/off:

mately right angles to the device.

➮ Slide the control panel into the de-

vice’s guides that are positioned

on the left and right at the lower

edge of the housing. Push the

control panel carefully into the

bracket until it clicks into place.

Switching on/off using the vehicle

ignition

The device will switch on/off simulta-

neously with the ignition if the device

is correctly connected to the vehicle’s

ignition and you did not switch the de-

vice off by pressing button 1.

➮ Flip up the control panel and care-

fully press it into the device until it

clicks into place.

Switching the device on/off using

the detachable control panel

➮ Detach the control panel.

The device switches off automatically

after approx. one minute.

➮ Attach the control panel again.

The device switches on. The last set-

ting (radio, DVD/CD, CD changer or

AUX) will be reactivated.

Note:

When attaching the control panel,

make sure you do not press the

display.

Switching on/off using button 1

➮ To switch on the device, press but-

ton 1.

If the device was still switched on when

you detached the control panel, it will

automatically switch on with the last

setting activated (radio, DVD/CD, CD

changer or AUX) when the panel is

replaced.

➮ To switch off the device, press and

hold down button 1 for longer

than two seconds.

The device switches off.

Note:

To protect the vehicle battery, the

device will switch off automatically

after one hour if the ignition is off.

SWITCHING ON/OFF

ADJUSTING THE VOLUME

Adjusting the volume

Switching the device off with the

remote control

Note:

The device can also be switched off

using the supplied RC 14 H remote

control.

The internal amplifier can be

switched off. If the loudspeakers

do not emit any sound, please

read the section entitled “Switch-

ing the internal amplifier on/off” in

the “Amplifier” chapter.

➮ Press the OFF button 1 on the

remote control.

The device switches off.

You can adjust the volume in steps from

0 (off) to 50 (maximum).

To increase the volume,

➮ turn the volume control 3 clock-

wise.

To decrease the volume,

➮ turn the volume control 3 anti-

clockwise.

Adjusting the volume with the

remote control

The volume can also be adjusted us-

ing the supplied remote control.

➮ To increase the volume, press the

VOL+ button 3 on the remote

control.

➮ To decrease the volume, press the

VOL- button 3 on the remote

control.

Setting the power-on volume

You can set the default volume level at

which the device plays when it is

switched on.

➮ Press the MENU•OK button 7.

➮ Press the or button 6 re-

peatedly until “VOLUME MENU”

appears on the display.

ADJUSTING THE VOLUME

➮ Press the MENU•OK button 7

Quickly reducing the volume

(Mute)

to display the volume menu.

“ON VOLUME” and the currently set

value are displayed or “LAST VOL-

UME” is displayed.

You can quickly reduce the volume to

a preset level (Mute).

➮ Briefly press button 1.

➮ Adjust the power-on volume using

“MUTE” appears on the display.

the

buttons 6.

Cancelling mute

To help you adjust the setting more

easily, the device will increase or de-

crease the volume as you make your

changes.

To return to your previously set volume

level,

➮ briefly press button 1 again.

If you change the setting to “LAST

VOLUME”, the volume when the de-

Muting with the remote control

vice switches on will be the same as The volume can also be muted using

the volume level that was set the last the supplied remote control.

time you switched the device off.

➮ Press the MUTE button ? on the

remote control.

Danger to hearing!

If the power-on volume is set to

“MUTE” appears on the display.

maximum, the volume level can be

very high when the device is

To return to your previously set volume

switched on.

Cancelling mute

level,

If the volume was set to maximum

➮ press the MUTE button ? again.

before the device was switched off

and the power-on volume is set to

“LAST VOLUME”, the volume level

can be very high when the device is

switched on again.

Severe damage to your hearing can

be caused in both cases!

Telephone audio/navigation

audio

If your car sound system is connected

to a mobile telephone or a navigation

system, the sound system’s volume will

be muted as soon as you “pick up” the

phone or as soon as a navigation an-

nouncement is made. You will then hear

the caller or navigation announcement

over the car sound system’s loud-

speakers. In order for this feature to

work, the mobile telephone or naviga-

tion system must be connected to the

car sound system as described in the

installation instructions.

When you have finished making your

changes,

➮ press the MENU•OK button 7

and then the DIS•ESC button 5

to exit the menu.

ADJUSTING THE VOLUME

You will need a cable for this with the

following Blaupunkt number: 7 607 001

503.

Setting the volume of the

confirmation beep

The system will output a confirmation

beep for some functions if you keep a

button pressed down for longer than

approx. two seconds, for instance,

You can find out from your Blaupunkt

dealer which navigation systems can

be used with your car sound system.

The volume with which telephone calls when assigning a radio station to a sta-

or navigation announcements are tion preset button. You can adjust the

broadcast can be adjusted.

volume of this beep.

➮ Press the MENU•OK button 7.

➮ Press the or button 6 re-

peatedly until “VOLUME MENU”

appears on the display.

➮ Press the or button 6

repeatedly until “VOLUME MENU”

appears on the display.

➮ Press the MENU•OK button 7

to display the volume menu.

➮ Press the or button 6

repeatedly until “TEL/NAVI”

appears on the display.

➮ Press the or button 6

repeatedly until “BEEP VOL”

appears on the display.

➮ Set your preferred volume level

➮ Adjust the volume using the

buttons 6. “0” means that the

beep is deactivated, “6” means

that the maximum beep volume is

set.

using the

buttons 6.

When you have finished making your

changes,

➮ press the MENU•OK button 7

and then the DIS•ESC button 5

to exit the menu.

When you have finished making your

changes,

➮ press the MENU•OK button 7

and then the DIS•ESC button 5

to exit the menu.

Note:

You can use the volume control

3 to adjust the volume of tele-

phone calls and navigation an-

nouncements whilst you are lis-

tening to them.

ADJUSTING THE VOLUME

RADIO MODE

Automatic sound

Radio mode

This feature automatically adjusts the

volume of the car sound system to suit

the speed at which the vehicle is trav-

elling. In order for this to work, your car

sound system must be connected as

described in the installation instruc-

tions.

This device is equipped with an RDS

radio receiver. Many of the receivable

FM stations broadcast a signal that not

only carries the programme but also

additional information such as the sta-

tion name and programme type (PTY).

The station name appears on the dis-

play as soon as the tuner receives it.

You can adjust the automatic volume

boost feature in six steps from (0 to 5).

Adjusting the tuner

➮ Press the MENU•OK button 7.

To ensure proper functioning of the

tuner, the device must be set for the

region in which you are located. You

can select among USA, South Ameri-

ca (S-America), Asia (ASIA), Europe

(EUROPE) and Thailand. The device

is factory-set to the region in which it

was delivered. If you experience prob-

lems with your radio reception, please

check this setting.

➮ Press the or button 6

repeatedly until “VOLUME MENU”

appears on the display.

➮ Press the MENU•OK button 7

to display the volume menu.

➮ Press the or button 6

repeatedly until “AUTO SOUND”

appears on the display.

➮ Set the volume adjustment level

These operating instructions apply to

the regional setting for USA, South

America, Asia and Thailand.

using the

buttons 6.

When you have finished making your

changes,

➮ Switch off the device by pressing

➮ press the MENU•OK button 7

and then the DIS•ESC button 5

to exit the menu.

button 1.

➮ Press the buttons 3 and 6 9 and

hold them pressed.

Note:

➮ Press and hold the button 1 until

The optimum setting for the

speed-dependent volume adjust-

ment feature depends on how

noise levels develop in your partic-

ular vehicle. You will need to test

various settings in order to find out

which is best suited to your vehi-

cle.

the display shows TUNER AREA.

The currently set region is shown on

the upper display line.

➮ To select the region, press the

or button 6.

➮ Press the MENU•OK button 7

to exit the menu and save the

setting.

RADIO MODE

Switching to radio mode

To start the radio mode,

➮ press the BND•TS button 4

Selecting the waveband/

memory bank

This device can be used to receive sta-

tions in the FM and AM frequency

bands. Three memory banks (FM1,

FM2 and FMT) are available for the FM

waveband and two memory banks (AM

and AMT) for the AM waveband.

➮ press the SRC button ; on the

device or the SOURCE button ;

on the remote control repeatedly

until “TUNER” appears on the dis-

play.

Six stations can be stored in each

memory bank.

Switching the RDS function on

or off (FM only)

The RDS function expands the per-

formance spectrum of your tuner.

To switch between the memory banks

FM1, FM2 and FMT or the memory

banks AM and AMT,

➮ briefly press the BND•TS button 4.

If the RDS function is activated, the

radio automatically tunes into the best

receivable frequency for the station that

is currently set.

Tuning into a station

There are various ways of tuning into

a station.

To use the RDS function,

Automatic station seek tuning

➮ press the MENU•OK button 7.

➮ Press the or button 6.

“TUNER MENU” appears on the dis-

play.

The radio tunes into the next receiva-

ble station.

➮ Press the MENU•OK button 7 to

Tuning into stations manually

display the tuner menu.

You can also tune into stations manu-

ally.

“RDS ON” or “RDS OFF” appears on

the display.

Note:

➮ To switch RDS on/off, press the

You can only tune into stations

manually if the RDS function is

deactivated.

or button 6.

➮ Press the MENU•OK button 7

and then the DIS•ESC button 5

to exit the menu.

➮ Press the or button 6.

The RDS functions are active if RDS

appears on the display.

RADIO MODE

Setting the sensitivity of station Storing stations

seek tuning

Storing stations manually

You can choose whether the radio

should only tune into stations provid-

ing good reception or whether it can

also tune into those with a weak re-

ception.

➮ Select the desired memory bank

FM1, FM2, FMT, AM or AMT.

➮ Tune into the station that you

want.

➮ Press and hold down one of the

station buttons 1 - 6 9 for longer

than two seconds to assign the

station to that button.

➮ Press the MENU•OK button 7.

“TUNER MENU” appears on the dis-

play.

➮ Press the MENU•OK button 7 to

Storing stations automatically

(Travelstore)

You can automatically store the six

strongest stations in the region. The

stations are stored in the FMT or AMT

memory bank.

display the tuner menu.

➮ Press the or button 6

repeatedly until “SENS” appears

on the display.

The display shows the currently set

sensitivity level. “SENS HI3” means that

the tuner is set to the highest sensitiv- Note:

ity setting. “SENS LO1” means it is set

to the lowest sensitivity setting.

Any stations that were previously

stored in this memory bank are

deleted in the process.

➮ Set the sensitivity level that you

want using the

buttons 6.

➮ First, select an FM memory bank

for an FM Travelstore or an AM

memory bank for an AM Travel-

store.

When you have finished making your

changes,

➮ press the MENU•OK button 7

and then the DIS•ESC button 5

to exit the menu.

➮ Press and hold down the BND•TS

button 4 for longer than two sec-

onds.

Note:

The storing procedure begins. “TRAV-

EL STORE PLEASE WAIT” appears

on the display. After the process has

completed, the radio will play the sta-

tion that is stored in memory location

1 of the FMT or AMT memory bank.

You can adjust different sensitivi-

ties for FM and AM.

RADIO MODE

➮ Press the MENU•OK button 7 to

display the menu. “SCAN TIME”

and the currently set time are dis-

played.

Listening to stored stations

➮ Select the memory bank or wave-

band.

➮ Press the station button 1 - 6 9

➮ Set the scanning time that you

of the desired station.

want using the

buttons 6.

Scanning receivable stations

(SCAN)

When you have finished making your

changes,

You can use the scan function to play

all the receivable stations briefly. You

can set the scanning time from 5 to 30

seconds in the menu in increments of

five seconds.

➮ press the MENU•OK button 7

and then the DIS•ESC button 5

to exit the menu.

Note:

The defined scanning time is also

applied by the system to scanning

carried out in DVD/CD and CD-

changer mode.

Starting SCAN

➮ Press and hold down the

MENU•OK button 7 for longer

than two seconds.

Programme type (PTY)

Scanning begins. “SCAN” appears

briefly on the display followed by a dis-

play of the current station name or fre-

quency.

Besides transmitting the station name,

some FM stations also provide infor-

mation on the type of programme that

they are broadcasting. Your car radio

can receive and display this informa-

tion.

Cancelling SCAN and continuing

listening to a station

For example, the programme types can

be:

➮ Press the MENU•OK button 7.

Scanning stops and the radio contin-

ues playing the station that it tuned into

last.

CULTURE

SPORT

ROCK

TRAVEL

NEWS

JAZZ

POP

CLASSICS

Setting the scanning time

➮ Press the MENU•OK button 7.

You can use the PTY function to select

stations of a particular programme

type.

“TUNER MENU” appears on the dis-

play.

➮ Press the or button 6 re-

peatedly until “VARIOUS MENU”

appears on the display.

RADIO MODE

PTY-EON

Selecting a programme type and

starting seek tuning

If you specify the programme type and

start seek tuning, the radio will switch

from the current station to a station of

the selected programme type.

➮ Press the or button 6.

The programme type that you select-

ed last appears on the display.

Notes:

➮ If you want to select another pro-

gramme type, you can do so by

pressing the or button 6

whilst this display is visible.

●

If the tuner does not find a station

that corresponds to the selected

programme type, you will hear a

beep and “NO PTY” appears brief-

ly on the display. The radio will

then retune to the station that it

received last.

➮ Press one of the buttons 1 - 6 9

to select a programme type that is

assigned to one of these buttons.

●

If the tuned radio station or anoth-

er station on the broadcasting net-

work broadcasts your selected

programme type at a later point in

time, the radio will automatically

switch from the currently tuned

station or from DVD/CD or CD-

changer mode to the station

whose programme type matches

the one you selected.

The selected programme type appears

briefly on the display.

➮ Press the or button 6 to

start seek tuning.

The radio will then tune into the next

station that it finds that corresponds to

your selected programme type.

Assigning a programme type to a

station button

Switching PTY on/off

➮ Select a programme type using

➮ Press the MENU•OK button 7.

the or button 6.

“TUNER MENU” appears on the dis-

play.

➮ Press and hold the desired station

button 1 - 6 9 for longer than two

seconds.

➮ Press the MENU•OK button 7 to

display the tuner menu.

The programme type is stored on the

selected button 1 - 6 9.

➮ Press the or button 6

repeatedly until “PTY” appears on

the display with the current setting.

➮ Press the or button 6 to

switch PTY ON or OFF.

➮ Press the MENU•OK button 7

and then the DIS•ESC button 5

to exit the menu.

RADIO MODE

Optimising radio reception

SHARX

The SHARX function allows you to

largely avoid interference caused by

neighbouring radio stations (FM only).

Switch on the SHARX function if the

density of radio stations in your area is

very high.

Treble reduction feature during

interference (HICUT)

The HICUT function improves recep-

tion during poor radio reception (only

FM). If reception interferences are

present, the interference level is auto-

matically reduced.

Switching SHARX on/off

➮ Press the MENU•OK button 7.

Switching HICUT on/off

“TUNER MENU” appears on the dis-

play.

➮ Press the MENU•OK button 7.

“TUNER MENU” appears on the dis-

play.

➮ Press the MENU•OK button 7 to

display the tuner menu.

➮ Press the MENU•OK button 7

➮ Press the or button 6 re-

peatedly until “SHARX” appears

on the display.

to display the tuner menu.

➮ Press the or button 6

repeatedly until “HICUT” appears

on the display.

➮ Press the or button 6 to

switch SHARX on/off.

➮ Press the or button 6 to

“SHARX OFF” means automatic band-

width switching is deactivated, “SHARX

ON” means it is activated.

adjust the HICUT setting.

“HICUT 0” means that no automatic

reduction of the interference level will

be made; “HICUT 2” means that a

maximum reduction will be made.

➮ Press the MENU•OK button 7

and then the DIS•ESC button 5

to exit the menu.

➮ Press the MENU•OK button 7

and then the DIS•ESC button 5

to exit the menu.

RADIO MODE

DVD OPERATION

Configuring the display

DVD operation

In radio mode, you can choose be-

tween various display modes.

Risk of severe damage to the

DVD/CD drive!

Mini DVDs/CD singles with a diam-

eter of 8 cm and non-circular con-

toured DVDs/CDs (shape CDs)

must not be used.

We accept no responsibility for any

damage to the DVD/CD drive that

may occur as a result of the use of

unsuitable DVDs/CDs.

1. “NORMAL MODE”

First line: Memory bank and sta-

tion name (if it can be received)

Second line: Frequency of the se-

lected station.

2. “CLOCK MODE”

First line: Memory bank and sta-

tion name (if it can be received)

Second line: frequency of the se-

lected station and clock time.

Region code

Code Region

3. “MINIMAL MODE”

NorthAmerica, incl. the US and

Canada.

First line: Memory bank and sta-

tion name (if it can be received)

Second line: No display.

Japan, Europe (excl. Eastern

Europe), Middle East, South

Africa.

➮ Briefly press the DIS•ESC button

5 to switch between the options.

Korea and South-East Asia.

Oceania incl. Australia, New

Zealand, Central and South

America.

India, Eastern Europe, Africa,

and Russia.

China.

All

regions.

The DVDs are identified with the re-

gion code applicable to the respective

region.

This device is permanently set to the

region code that is valid for the region

in which it was sold.

If the device does not play a DVD

(“WRONG RC” is shown on the inter-

nal display), please check whether the

DVD features the region code that is

valid for your region.

DVD OPERATION

Playing a DVD with a different region

code is not possible.

Switching to DVD mode

If there is no DVD inserted in the

drive,

This device can be used to play the

following data carriers/data formats:

➮ switch on the device by pressing

●

DVD video and DVD audio.

DVD-MP3/WMA.

button 1.

➮ Press the button 2.

●

Video CD (VCD).

The control panel opens.

MP3/WMA CDs, see the chapter

“MP3/WMA mode”.

➮ Gently insert the DVD with its

printed side pointing up into the

drive until you feel some resist-

ance.

●

Audio CDs, see the chapter “CD

mode”.

The drive draws in the DVD automati-

cally.

License

Manufactured under license of Dolby

Laboratories. “Dolby”, “Pro Logic” and

the double-D symbol are trademarks

of Dolby Laboratories.

You must not hinder or assist the drive

as it draws in the DVD.

➮ Gently close the control panel

whilst exerting a little pressure un-

til you feel it click into place.

This product contains technologies that

are copyright-protected under certain

US-American patents. The copyrights The DVD data are loaded.

are property of Macrovision Corpora-

Dependent upon the inserted DVD, the

playback starts or the DVD menu dis-

plays.

tion and other copyright owners. The

use of this copyright-protected technol-

ogy must be approved by Macrovision

Corporation and is intended exclusively

for private use and other presentations

in a limited scope, unless Macrovision

Corporation first issued a respective

permission.

If a DVD is already inserted in the

drive,

➮ press the SRC button ; on the

device or the SOURCE button ;

on the remote control repeatedly

until “DVD” appears on the display.

Playback begins from the point at which

it was last interrupted.

DVD OPERATION

● CHAPTER REMAIN

Starting playback

Example: TITLE 01/12 CHAP-

TER 08/26 00 : 05 : 22: The first

of twelve titles and the eighth of

26 chapters of this title is playing.

Next to it is the remaining playing

time of the current chapter.

After the desired DVD/VCD is loaded,

either the DVD menu is displayed or

the playback starts. This action is de-

pendent upon the inserted DVD.

➮ Press the button A or move

the selection mark to the menu

item that starts the movie, and

press the ENTER button > to

start the playback.

Showing/changing the display

information

➮ Press the DISPLAY button C on

the remote control repeatedly until

the desired information is dis-

played.

The DVD starts playing.

Display

Different information about the playing

time can be shown on the connected

display. The display can be hidden.

The display information is shown at the

top edge of the display.

Hiding the display information

The following displays are available:

➮ Press the DISPLAY button C

repeatedly until DISPLAY OFF

displays briefly and the display in-

formation is hidden.

●

TITLE ELAPSED

Example: TITLE 01/12 CHAP-

TER 08/26 01 : 26 : 14: The first

of twelve titles and the eighth of

26 chapters of this title is playing.

Next to it is the time elapsed of the

current title.

Fast forward/reverse search

You can fast forward or reverse the

DVD at 2x, 4x, 8x, 16x and 32x the

speed (dependent upon the DVD;

some DVDs can only be played up to

16x the speed).

TITLE REMAIN

Example: TITLE 01/12 CHAP-

TER 08/26 00 : 31 : 58: The first

of twelve titles and the eighth of

26 chapters of this title is playing.

Next to it is the time remaining of

the current title.

To fast forward or reverse search the

DVD,

➮ press the

button @ on

the remote control repeatedly until

the desired speed is displayed.

CHAPTER ELAPSED

Example: TITLE 01/12 CHAP-

TER 08/26 00 : 01 : 34: The first

of twelve titles and the eighth of

26 chapters of this title is playing.

Next to it is the elapsed playing

time of the current chapter.

DVD OPERATION

Stopping fast forward/reverse

Single frame

You can stop the movie of a DVD and

watch it in single frames.

To stop fast forward,

➮ press the button A on the

➮ First, press the button A on

remote control.

the remote control.

The DVD is played back at normal

speed.

➮ Press the STEP button P on

the remote control once or several

times to display the next frames

Slow motion

The DVD can be played forward or

reverse at reduced speed.

➮ press the STEP button P to

display the previous frames.

➮ First, press the button A on

the remote control.

Freeze frame

➮ Press the SLOW button @

once or several times on the

remote control for forward slow

motion

➮ During playback, press the but-

ton A on the remote control or

the button 6 9 on the device.

The playback is interrupted and shown

as a freeze frame.

➮ the SLOW button @ for

Continuing playback

reverse slow motion.

To continue the playback

After pressing the SLOW

but-

➮ press the button A on the re-

ton @ several times, the playback is

switched to half the regular speed

(1/2).

mote control or the button 6

on the device.

Interrupting playback

➮ Press the button O on the

With every additional press of the but-

ton, the speed is reduced further (1/4,

1/8 and 1/16).

remote control.

To play the DVD at regular speed

again,

The playback is interrupted, the start

screen of the device and the text

„PRESS PLAY TO CONTINUE“ are

displayed.

➮ press the button A on the re-

mote control.

Continuing playback

➮ press the button A on the

remote control.

Playback is continued again.

DVD OPERATION

To repeat the entire DVD,

Skipping a chapter

➮ press the PLAY MODE button J

A title of the DVD can be divided into

several smaller chapters.

on the remote control a third time.

The display shows the repeat symbol

and “ALL”.

To jump to the next or another chapter,

➮ press the button P once or

several times on the remote con-

trol.

Cancelling repeat

If you want to cancel the repeat func-

tion,

The playback jumps to the beginning

of the next or the corresponding follow-

ing chapter.

➮ press the PLAY MODE button

J on the remote control repeat-

edly until the repeat symbol is no

longer shown on the display.

To jump to the beginning of the current

or a previous chapter,

➮ press the button P once or

several times on the remote con-

trol.

Direct selection of a chapter

The remote control can also be used

to directly select a chapter or a specif-

ic position (playing time).

The playback jumps to the beginning

of the current or the corresponding pre-

vious chapter.

Selecting a chapter

To directly select a chapter,

Repeated playback of a DVD

title

A DVD is divided into different titles and

chapters, which can be selected on an

individual basis.

➮ press the GOTO button B on the

remote control.

The external display shows the GOTO

menu.

➮ Move the selection mark with the

buttons of the remote control

6 to “CHAPTER”.

Repeated playback of a chapter or

title

To repeat the current chapter,

➮ Press the ENTER button > on the

➮ press the PLAY MODE button

remote control.

J on the remote control.

➮ Enter the three-digit number of the

desired chapter using the numeric

buttons 0 to 9 S on the remote

control and press the ENTER but-

ton >.

The display shows the repeat symbol

and “CHAPTER”.

To repeat the current title,

➮ press the PLAY MODE button J

on the remote control a second

time.

Playback is continued at the desired

position.

The display shows the repeat symbol

and “TITLE”.

DVD OPERATION

To exit the GOTO menu and continue

with full playback,

Resuming playback at the start

of the first title of a DVD

➮ press the GOTO button B on the

➮ Press the

button A on the

remote control.

Selecting the playing time

Playback resumes at the start of the

title.

You can directly select a specific posi-

tion on the DVD by specifying the play-

ing time of this position either in the

chapter or in the title.

Note:

For most DVDs, this is the main

menu (root) of the DVD.

To jump to a specific position,

Displaying subtitles

To display subtitles,

➮ press the GOTO button B on the

remote control.

➮ press the SUB-T button N on

The external display shows the GOTO

menu.

the remote control.

The display information appears. The

number of languages available for sub-

titles and the current language are dis-

played next to “SUBTITLE”.

➮ Move the selection mark with the

buttons of the remote control

6 to “TT TIME” to set the abso-

lute playing time in the title, or to

CH TIME” to set the playing time

of the current chapter.

To change the language of the subti-

tles,

➮ Press the ENTER button > on the

➮ press the SUB-T button N once

or several times until the subtitles

are displayed in the desired lan-

guage.

remote control.

➮ Enter the desired position in

hours, minutes and seconds using

the numeric buttons 0 to 9 S on

the remote control.

Note:

You can also determine in the

menu of the DVD whether and in

which language subtitles are dis-

played (see DVD menu).

Playback is continued at the desired

position.

To exit the GOTO menu and continue

with full playback,

➮ press the GOTO button B on the

remote control.

DVD OPERATION

read the section “Displaying the

camera perspective” in the “Set-

up” chapter.

Selecting the playback

language

To select the playback language,

Zooming in/out of an image

area

You can enlarge a freely selectable

➮ press the AUDIO button M once

or several times on the remote

control.

The display information is shown. The section of the movie being played up

number of the language, the number to 4 times or reduce it to one-fourth.

of available playback languages and

the current language are shown.

To enlarge the image area,

➮ press the ZOOM button F once

Note:

You can also select the playback

or several times on the remote

control.

language in the menu of the DVD

(see DVD menu).

Every time you press the button, the

central image area is enlarged incre-

mentally.Available zoom levels are 2x,

3x and 4x.

Changing the camera

perspective

There are DVDs that offer two or more

different camera perspectives for a

scene.

Note:

After setting the desired zoom,

you can freely move the image

area with the arrow buttons 6 of

the remote control.

The number of the current camera per-

spective and the number of possible

camera perspectives is shown in the Reducing the image area

display information next to the camera

symbol.

After the maximum zoom is reached,

the image is reduced with each press

of the ZOOM button F in increments

of 1/2, 1/3 and 1/4.

To change the camera perspective,

➮ press the ANGLE button D on

the remote control.

Deactivating zoom in/out

The scene is shown from the next cam-

era perspective. The display informa-

tion is shown.

To continue viewing the movie without

zoom,

➮ press the ZOOM button F on

the remote control repeatedly until

the image is displayed without

zoom in/out.

Note:

You can specify in the setup menu

that a camera symbol is shown if

additional camera perspectives

are available. For further details,

DVD OPERATION

DVD menu

Selecting menu entries

DVDs generally provide menus in

which you can select among different

options, such as “Start movie”, “Chap-

ter selection”, etc.

The DVD menu is offered by the in-

serted DVD. If you insert a DVD and

playback starts, the DVD menu auto-

matically appears on the screen.

To switch between the individual menu

entries,

Note:

The selection options offered by

the DVD menu are dependent

upon the respective DVD.

➮ press one of the arrow buttons

6 on the remote con-

trol.

The DVD menu of a DVD can offer the

following:

To confirm a menu entry,

➮ press the ENTER button > on

●

You can select from different lan-

guages for the playback or the

subtitles.

the remote control.

Exiting the DVD menu

●

In addition to the actual movie,

you can also view the trailer that

was used in movie theatres or on

television to promote the movie or

view the “Making of ...” of the mov-

ie.

When you make a corresponding se-

lection in the DVD menu, e.g. the play-

back of the movie, you automatically

leave the DVD menu and the playback

starts.

Displaying the title menu

●

A movie is divided into several se-

quential chapters. You can select a

chapter and directly start the play-

back in the chapter without first

having to “fast forward” to the cor-

responding position like you have

to with a video cassette.

You can also call the title menu directly

to conveniently select the individual ti-

tles/chapters:

➮ Press the TITLE button R on the

remote control.

The title menu appears.

Displaying the DVD menu

You can end the playback at any time

and display the menu of the DVD.

Note:

This function is not supported by

all DVDs.

➮ Press the MENU button = on

the remote control.

DVD OPERATION

Programming your favourite

track with the remote control

Playback of DVD audio

This device can also be used to play

DVD audio. The functions described

above can be used provided that the

DVD supports them.

In DVD mode, you can use the remote

control to program a playlist of up to

20 of your favourite tracks of the cur-

rent DVD. The playlist is deleted when

you remove the DVD or when you stop

the playlist and exit the programming

mode.

The following functions are particularly

useful for DVD audio.

Repeated playback of a defined

section of a title

Note:

This function is operable only if an

external display is connected.

You can use the remote control to de-

fine a section of a title and repeat it

endlessly in a loop.

Defining and starting a playlist

Note:

➮ Press the PROGRAM button K

This function is operable only if an

external display is connected.

on the remote control.

The programming mode is displayed.

The number of available titles on the

DVD is displayed and the selection

mark (green) is positioned at memory

location 1.

To define the starting point of the sec-

tion,

➮ listen to a title and press the A-B

button L on the remote control at

the point where you want the re-

peat function to start.

➮ Enter the first title and the chapter

of your playlist with the numeric

buttons 0 to 9 S.

To define the ending point of the sec-

tion,

Note:

➮ listen to the title again and press

the A-B button L on the remote

control again at the point where

you want the repeat function to

end.

After entering the title, the chap-

ters available for this title are dis-

played.

The selection mark moves to the next

memory location.

The section of the title is repeated until

you press the A-B button L again.

➮ Enter the next titles and chapters

of your playlist with the numeric

buttons 0 to 9 S.

If your playlist should have fewer than

twenty titles,

➮ move the selection mark with the

arrow buttons 6 to “START” and

press the ENTER button >.

DVD OPERATION

Stopping the playlist

DVD setup

The setup of the device offers a varie-

ty of options to customise the device.

To end a running playlist,

➮ Press the PROGRAM button K

on the remote control.

Calling up the setup menu

To call up the setup menu,

The programming mode is displayed.

The selection mark is positioned on

“STOP”.

➮ press the SETUP button < on

the remote control.

To end the playback of the playlist,

Performing settings in the

setup menu

➮ press the ENTER button >.

Note:

The setup menu is divided into five

sections: General Setup,Audio Setup,

Video Setup, Preference Page and

Password Setup.

You can also edit the playlist by

moving the selection mark to indi-

vidual memory locations and en-

tering a different title with the nu-

meric buttons.

➮ Select one of the five sections in

the setup menu using the buttons

6 of the remote control or

the arrow buttons on the device.

➮ Confirm your entry with the EN-

TER button > on the remote

control.

The selection mark (yellow) is dis-

played and positioned on the first en-

try of the selected menu.

➮ Select the desired menu item us-

ing the buttons

6 of the re-

mote control or the arrow buttons

on the device.

➮ Confirm your entries with the EN-

TER button > on the remote

control.

➮ Perform your settings using the

buttons

6 of the remote

control or the arrow buttons on the

device.

DVD OPERATION

➮ Confirm your entries with the EN-

TER button > on the remote

control.

● WIDE: The DVD player is con-

nected to a 16:9 monitor. The

wide image is displayed on the

screen at full size.

If you want to perform additional set-

tings in other sections of the menu:

Displaying the camera perspective

➮ Press the button 6 of the re-

mote control or the button 6 on

the device to return to the selec-

tion of the menu sections.

You can specify that a camera symbol

is shown if more than one camera per-

spective is available on the DVD. For

this purpose, select the setting “ON”.

To exit the setup menu,

The setting of the camera perspective

is performed under the “Angle Mark”

menu item.

➮ press the SETUP button < on

the remote control.

General Setup - general

settings

Displaying captions

Captions are special subtitles that can-

not be switched on/off using the subti-

tle function of a DVD. You can use this

menu to switch these subtitles on or

off. Select the setting “Off” to switch it

off.

In the general settings, you can define

the type of connected display, display

a symbol if more than one camera per-

spective is available, switching captions

on and off, and set the priority for au-

dio or video DVDs.

DVD/DVD audio priority

Selecting the monitor setting

DVD audio generally contains audio

data in two versions:

The setting of the monitor is performed

under the “TV Display” menu item.

One high-resolution uncompressed

variant and one compressed variant

(e.g. in DTS or Dolby Digital).

The following monitor settings are avail-

able:

Here you can define whether you want

to listen to high-resolution audio data

or to compressed audio data.

●

Normal/LB: The DVD player is

connected to a 4:3 monitor. The

wide image is displayed on the

screen at full width with black bars

at the top and bottom edge of the

screen.

Select the “DVDAudio” setting for high-

er quality or “DVD Video” for the com-

pressed version.

●

Normal/PS: The DVD player is

connected to a 4:3 monitor. The

wide image is displayed using the

full height of the screen. The left

and right edge of the wide image

is automatically cut off.

The setting of the priority is performed

under the “Priority” menu item.

DVD OPERATION

Setting the LPCM

Audio Setup

This device can be used to output a

linear PCM signal (LPCM) with a sam-

pling rate of 48 K, 96 K or 192 K.

The Audio Setup allows you to control

the SPDIF output of the device, set the

PCM channel and set the sampling rate

of the LPCM output. In addition, you

can control the Dynamic Range Con-

trol (DRC) and the HDCD filter.

The LPCM setting is located under

“LPCM OUT” in the “SPDIF Setup”.

Dolby Digital Setup -

Dynamic Range Control

SPDIF setting

For the SPDIF output of the device, you

can select whether an SPDIF-RAW

signal, an SPDIF-PCM signal a manu-

ally controlled signal should be output

or that the SPDIF output should be

switched off.

Dynamic Range Control means that

the difference between “loud” and “soft”

sounds is adjusted. The volume of soft

sounds is increased and that of loud

sounds is lowered. You can use the

DRC of the device to set the dynamics

of a Dolby programme in increments

from “OFF” to “Full”. Select the “FULL”

setting for full dynamic adjustment.

Select the desired setting under

“SPDIF Output”.

Notes:

The setting of DRC is located under

“Dynamic” in the “Dolby Digital Setup”.

●

The SPDIF output is not muted for

traffic announcements, incoming

telephone calls and navigation

voice output.

Setting the HDCD filter

If you play HDCD-DVDs or CDs (High

Definition Compatible Digital), you can

select a filter.

●

The audio data of the DVD drive

are output via the SPDIF output.

Select the desired filter under “HDCD”.

PCM channel

The SPDIF output can be used to out-

put the PCM data in the “L/R”, “LS/RS”

or “C/LFE” mode.

The respective setting can be per-

formed under “PCM Channel” in the

“SPDIF Output”.

Video Setup - image settings

In the Video Setup, you can perform

different settings for an optimal image

playback on the connected display.

Adjusting picture sharpness

To adjust the picture sharpness, you

can select among the settings “High”,

“Medium” and “Low”.

The setting for picture sharpness is lo-

cated in “Quality” under “Sharpness”.

DVD OPERATION

Brightness

Preferences - preferred

settings

You can adjust the brightness in incre-

ments from -20 to +20.

Under “Preferences”, you can set the

television standard of the external dis-

play, switch PBC on and off, set the

preferred playback language, select the

preferred language for subtitles, set the

parental control, set the region, and

reset the device.

The setting for brightness is located in

“Quality” under “Brightness”.

Contrast

You can adjust the contrast in incre-

ments from -16 to +16.

The setting for contrast is located in

“Quality” under “Contrast”.

To call up the preferred settings,

➮ press the button O on the

remote control.

Gamma correction

➮ Press the SETUP button < on

You can adjust the gamma correction

for playback on TFT displays. You can

select among the settings “High”, “Me-

dium”, “Low”, and “None”.

the remote control.

➮ Select "Preferences Page" using

the buttons

6 of the remote

control or the arrow buttons on the

device.

The setting for gamma correction is

located in “Quality” under “Gamma”.

➮ Confirm your entry with the EN-

TER button > on the remote

control.

Colour

You can adjust the colour in increments

from -9 to +9.

Setting the colour television

standard of the TV device

The setting for colour is located in

“Quality” under “Hue”.

For a perfect image quality, set the col-

our television standard on the device

which is used by the attached monitor.

Colour saturation (for NTSC only)

You can adjust the colour saturation in

increments from -9 to +9.

“PAL” is the standard used in Europe,

“NTSC” is the standard for the Ameri-

can/Asiatic region.

The setting for colour saturation is lo-

cated in “Quality” under “Saturation”.

If you select the “MULTI” setting, the

standard of the DVD is used for the

output.

Luminance (for NTSC only)

You can select the settings “0T” and

“1T” for luminance.

The setting of the television standard

is performed under the “TV TYPE”

menu item in the “Preferences Page”

menu.

The setting for luminance is located in

“Quality” under “Luma Delay”.

DVD OPERATION

Note:

Selecting the language for the DVD

The television standard can also

be switched using the remote con-

trol. Press the TV-Mode button E

repeatedly until the desired televi-

sion standard is displayed.

You can preselect the preferred lan-

guage for the menus of the DVD. If the

selected language for menus is avail-

able on the DVD, the menus of the DVD

are displayed in the preset language.

Switching playback control on/off

The setting of the language for the DVD

menu is performed in the “Disc Menu”

menu item.

If the Playback Control (PBC) function

is switched off, the titles and chapters

of a VCD/SVCD are played in ascend-

ing order. With PBC on, the VCD/

SVCD is played with the predefined

menus and in logical order.

Parental control

You can secure the device against un-

authorised use by assigning a pass-

word. In addition, you can specify a

rating level.

The setting for PBC is located under

“PBC”.

Selecting the playback language

Rating level means that some DVDs

are equipped with a code that de-

fines the age-appropriate release.

You can preselect the preferred play-

back language of the DVD. If the se-

lected language is available on the

DVD, the playback starts with the pre-

set language.

If you set a rating level that is lower

than the one found on the inserted

DVD, it can be played only after enter-

ing the password.

The setting of the playback language

is performed under the “Audio” menu

item.

Note:

Not all DVDs support the Rating

Level function.

Selecting the language of subtitles

In the menu you can define which mov-

ies can be played. These ratings follow

the recommendations of the Motion Pic-

ture Association of America (MPAA).

You can preselect the preferred lan-

guage for subtitles. If the selected lan-

guage for subtitles is available on the

DVD, the subtitles are displayed in the

preset language.

The setting of the subtitles is performed

under the “Subtitle” menu item.

DVD OPERATION

The following options can be selected: The setting for the parental control can

be performed in the “Parental” menu

item.

1 KID SAF: Approved for children

2 G: Approved for children

Resetting the device

3 PG:Accompanying adult during play-

back is suggested.

You can reset the device, thereby de-

leting all, personal setting (including the

self-defined password) and re-estab-

lish the basic factory settings.

4 PG 13: Accompanying adult is sug-

gested, not suitable for children under

the age of 13.

Resetting the device is performed in

the “Default” menu item.

5 PG-R: Only for adolescents accom-

panied by an adult. Prohibited for chil-

dren, contents includes violence, ob-

scene language, etc.

Setting password protection -

Assigning a password

You can activate the password protec-

tion for the device. With activated pass-

word protection, you can change the

age-appropriate release/parental con-

trol only after entering the password.

6 R: Prohibited for adolescents, con-

tents includes violence, obscene lan-

guage, etc.

7 NC 17: Contents not suitable for

adolescents under the age of 17.

8 ADULT: Contents for adults only:

Violence, sex, etc.

Activating/deactivating password

protection

Notes:

The password protection can be acti-

vated (ON) or deactivated (OFF) in the

“Password Mode” menu. To change

the setting, you must enter the current

password using the numeric buttons

●

Some blocked DVDs can be re-

leased directly at the start with

YES (ENTER) and the password.

Others require you to change the

rating level in the setup before the

playback of the DVD. This action is

dependent upon the DVD.

If you have not yet entered a password,

use the preset password 000000.

●

If you activated password protec-

tion, the age-appropriate release

can only be changed after enter-

ing the password. For further de-

tails, please read the section “Acti-

vating/deactivating password pro-

tection”.

After you have entered the correct

password, the entry marking automat-

ically switches to “OK”.

DVD OPERATION

Changing the password

Exiting the setup menu

You can change the preset password

and define your own. The password

must have six digits. To change the

password, you must first enter the old

password. If you have not yet assigned

a password, use the preset password

000000.

To exit the setup menu,

➮ press the SETUP button < on

the remote control.

➮ select “Exit Setup Menu” using the

buttons

6 of the remote con-

trol or the arrow buttons on the de-

vice.

The password is changed in the “Pass-

word” menu. To change the password,

you must first enter the current pass-

word with the numeric buttons S and

then enter the new password twice.

➮ Confirm your entry with the EN-

TER button > on the remote

control.

After you have entered the correct

password and entered the new pass-

word twice, the entry marking automat-

ically switches to “OK”.

Note:

If you forgot your password, you

can use the master code 136900

and assign a new password.

CD MODE

The drive draws in the CD automati-

cally.

CD mode

You can use this device to play stand-

ard audio CDs, CD-Rs and CD-RWs

with a diameter of 12 cm. To avoid prob-

lems when playing CDs, you should not

burn CDs at speeds greater than 16x.

You must not hinder or assist the drive

as it draws in the CD.

➮ Gently close the control panel

whilst exerting a little pressure un-

til you feel it click into place.

To ensure proper functioning, use only

CDs with the Compact-Disc logo.

Copy-protected CDs can cause play-

back problems. Blaupunkt cannot guar-

antee the proper functioning of copy-

protected CDs!

The CD starts playing.

If a CD is already inserted in the

drive,

➮ press the SRC button ; on the

device or the SOURCE button ;

on the remote control repeatedly

until “DISC” appears on the dis-

play.

Besides being able to play audio CDs

on this device, you can also play CDs

containing MP3 music files and DVDs.

For further details, please read the

chapters “MP3 mode” and “DVD

mode”.

Playback begins from the point at which

it was last interrupted.

Selecting tracks

Risk of severe damage to the

DVD/CD drive!

➮ Press one of the arrow buttons 6

to select the next or previous

track, or press the or button

P on the remote control.

CD singles with a diameter of 8 cm

and non-circular contoured CDs

(shape CDs) must not be used.

We accept no responsibility for any

damage to the DVD/CD drive that

may occur as a result of the use of

unsuitable DVDs/CDs.

If you press the or button 6 or

P once, the current track is played

again.

Direct track selection with the

remote control

In CD mode, you can directly select

tracks with the remote control or se-

lect a specific playing time on the CD

or in the current track.

Switching to CD mode

If there is no CD inserted in the drive,

➮ switch on the device by pressing

button 1.

➮ Press the button 2.

Note:

The control panel opens.

This function is operable only if an

external display is connected.

➮ Gently insert the CD with its print-

ed side uppermost into the drive

until you feel some resistance.

CD MODE

to start using the numeric buttons

Track selection

➮ Enter the number of the desired

track directly using the numeric

buttons 0 to 9 S of the remote

control.

After entering the time, the playback is

continued at the desired position.

Fast track selection

To quickly select tracks backwards or

forwards,

After entering the number, the desired

track begins to play.

➮ press and hold down one of the

➮ Press the GOTO button B re-

peatedly until the external display

shows “SELECT TRACK”.

buttons 6 until fast-re-

verse/fast-forward track selection

begins.

➮ Enter the number of the desired

track using the numeric buttons 0

to 9 S, e.g. 0 2 for the second or

1 2 for the twelfth track.

Fast searching (audible)

To fast search backwards or forwards,

➮ press and hold down one of the

buttons 6 until fast searching

backwards/forwards begins.

After entering the number, the desired

track begins to play.

Fast searching with the remote

control

Selecting the playing time on the

You can perform a fast searching with

different speeds (2x, 4x, 8x, 16x, and

32x) with the remote control.

➮ Press the GOTO button B re-

peatedly until the external display

shows “DISC GO TO”.

Note:

➮ Enter the desired playing time in

the minute-second format where

you want the playback to start us-

ing the numeric buttons S.

The search speed is shown on an

external display (optional equip-

ment).

For fast searching forwards

After entering the time, the playback is

continued at the desired position.

➮ press the

button @ on the re-

mote control repeatedly until the

desired speed is shown.

Selecting the playing time in the

current track

For fast searching backwards

➮ Press the GOTO button B re-

peatedly until the external display

shows “TRACK GO TO”.

➮ press the

button @ on the re-

mote control repeatedly until the

desired speed is shown.

➮ Enter the desired playing time in

the minute-second format where

you want the playback in the track

CD MODE

To end the searching,

Repeating tracks (REPEAT)

➮ press the button A on the re-

If you want to repeat a track,

mote control.

➮ press the RPT 4 button 9.

Random track play (MIX)

➮ Press the 1 MIX button 9.

“REPEAT TRACK” appears briefly on

the display, and the RPT symbol is

shown. The track is repeated continu-

ously until you deactivate RPT.

“MIX CD ON” appears briefly on the

display and the MIX symbol is dis-

played. The next randomly selected

track will then be played.

Cancelling REPEAT

If you want to cancel the repeat func-

tion,

Cancelling MIX

➮ press the RPT 4 button 9 again.

➮ Press the 1 MIX button 9 again.

“REPEAT ALL” appears briefly on the

display, and the RPT symbol disap-

pears. Normal playback is then re-

sumed.

“MIX CD OFF” appears briefly on the

display and the MIX symbol disap-

pears.

Scanning tracks (SCAN)

You can scan (briefly play) all the tracks

on the CD.

REPEAT with the remote control

In CD mode, you can select the RE-

PEAT mode with the remote control.

➮ Press and hold down the

MENU•OK button 7 for longer

than two seconds.

To repeat a track,

➮ press the PLAY MODE button J

repeatedly until “TRACK” is shown

on the external display next to the

repeat symbol.

The next track will then be scanned.

Note:

You can set the scanning time.

For further information, please

read the section entitled “Setting

the scanning time” in the “Radio

mode” chapter.

To cancel REPEAT,

➮ press the PLAY MODE button J

repeatedly until “ALL” is shown on

the external display next to the re-

peat symbol.

Cancelling SCAN and continuing

listening to a track

To end the scanning process,

➮ press MENU•OK button 7.

The currently scanned track will then

continue to be played normally.

CD MODE

Repeated playback of a defined Changing the display

section of a title

You can select different displays for CD

mode:

You can use the remote control to de-

fine a section of a title and repeat it

endlessly in a loop.

●

“NORMAL MODE”:

First line: Track number

Second line: Playing time

Note:

This function is operable only if an

external display is connected.

●

“INFO MODE”:

First line: Track number and play-

ing time.

To define the starting point of the sec-

tion,

Second line: CD text (if available)

●

“CLOCK MODE”:

First line: Track number and play-

ing time.

Second line: CD text (if available)

and time

➮ listen to a title and press the A-B

button L on the remote control at

the point where you want the re-

peat function to start.

To define the ending point of the sec-

tion,

●

“MINIMAL MODE”:

The title number is displayed on

the top line.

➮ listen to a title and press the A-B

button L on the remote control at

the point where you want the re-

peat function to end.

Note:

CD text can only be displayed if

the appropriate information is con-

tained on the CD.

The section of the title is repeated until

you press the A-B button L again.

To switch between the display options,

Interrupting playback (PAUSE)

➮ Press the button 6 9.

➮ press the DIS•ESC button 5

once or several times until the

desired display is shown.

“PAUSE” appears on the display.

Cancelling pause

Display on an external display

➮ During the pause, press the but-

In CD mode, the following information

is always shown on an external display,

independent of the selected display of

the device display:

ton 6 9.

Playback is continued.

You can also interrupt and continue

playback using the button A on the

remote control.

●

the number of the current track,

the number of tracks on the CD,

the track information from the CD

text (if available)

and

CD MODE

●

the playing time of the track

(Single Elapsed)

Scrolling CD text again

You can re-scroll the displayed CD text

at any time in Info Mode.

●

the remaining playing time of the

track (Single Remain)

➮ Briefly press the 5 SCL button 9.

Programming your favourite

track with the remote control

●

the elapsed playing time of the CD

(Total Elapsed)

In CD mode, you can use the remote

control to program a playlist of up to

20 of your favourite tracks of the cur-

rent CD. The playlist is deleted when

you remove the CD or when you stop

the playlist and exit the programming

mode.

●

the remaining playing time of the

CD (Total Remain).

To select one of the different time dis-

play options,

Note:

➮ press the DISPLAY button C on

the remote control repeatedly until

the desired information is shown

on the external display.

This function is operable only if an

external display is connected.

Defining and starting a playlist

Displaying CD text

➮ Press the PROGRAM button K

on the remote control.

Some CDs include CD text. The CD

text might contain the names of the

artist, album and tracks.

The programming mode is displayed.

The number of available tracks on the

CD is displayed and the selection mark

(green) is positioned at memory loca-

tion 1.

If the CD text is available on the CD, it

is shown on the second line of the dis-

play in Info Mode and Clock Mode. The

CD text is shown as scrolling text on

the display with every track change.

After the CD text is displayed once, the

first 13 characters of the CD text of the

current track are displayed.

➮ Enter the first track of your playlist

with the numeric buttons 0 to 9 S.

The selection mark moves to the next

memory location.

➮ Enter the next track of your playlist

with the numeric buttons 0 to 9 S.

Note:

The CD text is displayed as scroll-

ing text if it contains more than

13 characters in Info mode or

more than 8 characters in Clock

mode.

If your playlist should have fewer than

20 tracks,

➮ move the selection mark with the

arrow buttons 6 to “START” and

press the ENTER button >.

CD MODE

MP3/WMA MODE

Note:

MP3/WMA mode

After you have programmed a

playlist and exited the menu with

“EXIT”, the playlist is not saved.

You can also use this car sound sys-

tem to play DVDs, CD-Rs and CD-

RWs that contain MP3 music files. You

can also play WMA files. The opera-

tion for playing MP3 and WMA files is

identical.

Stopping the playlist

To end a running playlist,

➮ Press the PROGRAM button K

Notes:

on the remote control.

●

WMA files with Digital Rights Man-

agement (DRM) from online music

shops cannot be played with this

device.

The programming mode is displayed.

The selection mark is positioned on

“STOP”. To end the playback of the

playlist,

●

WMA files can only be played

back safely if they were created

with Windows Media-Player ver-

sion 8.

➮ press the ENTER button >.

Notes:

●

If you selected “STOP” and con-

firmed it with the ENTER button

>, the playlist is deleted.

Preparing an MP3/WMA CD

The various combinations of DVD/CD

burners, DVD/CD burning software and

DVD/CD blanks may lead to problems

arising with the device’s ability to play

certain CDs. If problems occur with

your own burned DVDs/CDs, you

should try another brand of DVD/CD

blanks or choose another colour of CD

blanks. To avoid problems when play-

ing CDs, you should not burn DVDs/

CDs at speeds greater than 16x.

●

If you want to exit the display of

the playlist without deleting the

playlist, mark “EXIT” and confirm it

with the ENTER button >.

Ejecting a CD

➮ Press the

The control panel opens out towards

you.

button 2.

➮ Press the eject button next to the

CD compartment.

The format of the DVD/CD must be ISO

9660 Level 1/Level 2 or Joliet. Other

formats cannot be played reliably.

The CD is ejected.

➮ Remove the CD and close the con-

trol panel.

You can create a maximum of 254 di-

rectories on a DVD/CD. You can use

this device to access each of these di-

rectories.

Notes:

●

If a CD is ejected, the drive will

automatically draw it back in again

after approx. 10 seconds.

Up to 599 MP3 files in one directory

can be managed with this device. The

maximum number of files per CD/DVD

●

CDs can also be ejected if

another audio source is active.

MP3/WMA MODE

is 150,000, the maximum directory If you like your files to be in the correct

depth is five.

order, you should use burner software

that places files in alphanumerical or-

der. If your software does not provide

this feature you also have the option of

sorting the files manually. For this pur-

pose, you must enter a number in front

of each file name, e.g. “001”, “002”, etc.

The leading zeros must also be en-

tered.

D01

D02

D03

D04

T001

MP3 tracks can contain additional in-

formation such as the artist, album and

track names (ID3 tags). This device can

display ID3 tags (version 1).

T001

T002

T003

T004

T005

T002

T003

T004

T005

T006

T007

T008

T009

T010

T011

•

When creating (coding) MP3 files from

audio files, you should use bit rates

from 80 to 320 kbit/s and sampling

rates of 32, 44 and 48 kHz.

T001

T002

T003

T004

T005

T006

This device can only play MP3 files that

have the “.MP3” file extension.

Notes:

To ensure uninterrupted playback,

You can name each directory using a

PC. The device is capable of display-

ing the directory name. Name the di-

rectories and tracks/files using your CD

burner software. The software’s instruc-

tion manual will provide details on how

to do this.

● do not try changing the file exten-

sion to “.MP3” of any files other

than MP3 files and then attempt to

play them! The device will ignore

these invalid files during playback.

● Do not use “mixed” CDs contain-

ing both non-MP3 data and MP3

tracks (the device only reads MP3

files during MP3 playback).

Note:

When naming directories and

tracks/files you should avoid using

accents and special characters.

You can use a maximum of 32

characters (including the “.MP3”

or “.WMA”file extension) for track

names and directory names.

● Do not use mix-mode CDs con-

taining both CD-audio tracks and

MP3 tracks. If you try playing a

mix-mode CD, the device will only

play the CD-audio tracks.

MP3/WMA MODE

Note:

The system can display MP3-ID

Switching to MP3 mode

MP3 mode is activated in the same

way as normal CD mode. For further

information, please read the section

entitled “Switching to CD mode” in the

“CD mode” chapter.

tags (version 1) if they have been

saved with the MP3 files (for fur-

ther information, please read the

instructions that came with your

PC’s MP3 software or burner soft-

ware).

If you connected an external display,

the following information is displayed

after the CD is read and the MP3/WMA

playback has started:

3. “MP3 BROWSE MODE”:

First line: Name of current track

Second line: Name of next track.

●

Number of the track and number

of tracks in the directory.

4. “CLOCK MODE”:

First line: Type of file (MP3 or

WMA), number of track and play-

ing time.

●

Bit rate of the file.

Elapsed playing time and total

playing time of the track.

Second line: MP3 info and time.

●

Name of the directory.

To switch between the different display

options,

In the left column, the list of tracks

in the directory.

➮ press the DIS•ESC button 5.

●

In the right column, MP3 informa-

tion from the ID tags (only if avail-

able on the DVD/CD).

Selecting the directory on the

device

For convenient navigation in the data

structure of the CD, you can display

the current and the following directory

on the two lines of the display. The di-

rectories are displayed with the names

that you created when burning the CD.

Whilst the directories are being dis-

played, you can use the arrow buttons

to display and select all the available

directories.

Setting the display (internal

display)

Configuring the default display

You can display various types of infor-

mation on the current track:

1. “NORMAL MODE”:

First line: Type of file (MP3 or

WMA), number of track and play-

ing time.

➮ During the MP3 playback, press

Second line: Track name

the or button 6.

2. “INFO MODE”:

The browse mode is automatically

started, the current track is displayed

on the first line of the display and the

next track is displayed on the second

line.

First line: Track name.

Second line: MP3-ID-TAG (if avail-

able and activated, see “Selecting

MP3 info”)

MP3/WMA MODE

➮ Press the or button 6

repeatedly until the first line of

the display shows a D.

Selecting tracks in browse mode

Browse mode conveniently allows you

to view the tracks contained in a direc-

tory and then select a particular track.

➮ Press the button 6.

The names of the current and the fol-

lowing directory are shown on the dis-

play.

➮ During MP3 playback, repeatedly

press the DIS•ESC button 5 until

“MP3 BROWSE MODE” is dis-

played.

If you want to select a directory,

➮ Press the or button 6 to

display all the tracks contained in

the directory one after another.

➮ press one of the

buttons 6

repeatedly until the directory is

shown in the top line of the dis-

play and then press the button

➮ If you want to select the track

shown on the upper display line,

press the button 6.

The selected directory is opened. The

tracks contained in the directory are

displayed in browse mode.

Selecting a directory/track with

the remote control

In MP3 mode, you can directly select

directories and tracks using the remote

control.

➮ Press the or button 6 re-

peatedly until the first line of the

display shows the desired track.

➮ Press the button 6.

Note:

The playback starts, the browse mode

is automatically ended after approx. 10

seconds.

This function is operable only if an

external display is connected.

Track selection in the same

directory

Selecting a track on the device

➮ Enter the number of the desired

track directly using the numeric

buttons 0 to 9 S of the remote

control.

Selecting tracks/files using the

arrow buttons (Normal, info and

clock mode)

To move up or down to another track/

file in the current directory,

After entering the number, the desired

track begins to play.

➮ press the or button 6 once

or several times.

To move up or down to another track/

file in the current directory,

A single press of button 6 restarts

the current track, if it previously played

for more than 3 seconds.

➮ press the or button P once or

several times.

MP3/WMA MODE

To move up or down to another track/

file in the current directory,

Selecting a directory

To select a directory with the remote

control,

➮ press the or button 6 once

or several times to move the se-

lection mark to the desired track.

➮ press the button 6 repeatedly

until the selection mark is posi-

tioned on the directory symbol.

➮ Press the ENTER button >.

The desired track is started.

➮ Press the ENTER button >.

The directory list is shown on the ex-

ternal display.

Fast search

To fast search backwards or forwards,

➮ Press the or button 6 to

➮ press and hold down the or

button 6 until fast searching

backwards/forwards begins.

mark the desired directory.

➮ Press the ENTER button >.

The track list of the directory is dis-

played.

Fast searching with the remote

control

➮ Press the or button 6 to

You can perform a fast searching with

different speeds (2x, 4x, 8x, 16x, and

32x) with the remote control.

mark a track in the directory.

➮ Press the ENTER button >.

The desired track is started.

Note:

The search speed is shown on an

external display.

Selecting a track from the track list

You can display a list of all tracks of a

DVD/CD on the external display and

select a track from the list.

For fast searching forwards

➮ press the

button @ on the re-

mote control repeatedly until the

desired speed is shown.

➮ Press the PROGRAM button K.

The track list is displayed.

For fast searching backwards

➮ Enter the number of the desired

track directly using the numeric

buttons 0 to 9 S of the remote

control.

➮ press the

button @ on the re-

mote control repeatedly until the

desired speed is shown.

To end the searching,

After entering the number, the desired

track begins to play.

➮ press the button A on the re-

mote control.

MP3/WMA MODE

Cancelling SCAN and continuing

listening to a track

Random track play – MIX

To play the tracks in the current direc-

tory in random order,

➮ Press and hold down the MENU•OK

button 7 for longer than two sec-

onds.

➮ briefly press the 1 MIX button 9.

“MIX ON” and the MIX symbol appear

on the display.

The currently scanned track will then

continue to be played normally.

Cancelling MIX

Repeated playback of individual

tracks or entire directories –

REPEAT

To cancel MIX,

➮ press the 1 MIX button 9 repeat-

edly until “MIX OFF” is displayed.

To play the current track repeatedly,

The MIX symbol disappears.

➮ briefly press the 4 RPT button 9.

The Repeat function is automatically

activated, and the display shows the

RPT symbol.

“REPEAT TRACK” and RPT appear

briefly on the display.

To repeat the whole directory,

Scanning tracks – SCAN

You can scan (briefly play) all the tracks

on the CD.

➮ press the 4 RPT button 9 again.

“REPEAT DIR” appears briefly on the

display.

➮ Press and hold down the

MENU•OK button 7 for longer

than two seconds.

Cancelling REPEAT

To stop the current track or current di-

rectory from being repeated,

The next track will then be scanned.

“SCAN” briefly appears on the display.

➮ press the 4 RPT button 9 repeat-

edly until “REPEAT OFF” is dis-

played.

Notes:

●

You can set the scanning time.

For further information, please

read the section entitled “Setting

the scanning time” in the “Radio

mode” chapter.

RPT disappears from the display.

REPEAT with the remote control

In CD mode, you can select the

REPEAT mode with the remote control.

●

The Scan function cannot be acti-

vated if it is started at the last title

of a directory.

Note:

This function is operable only if an

external display is connected.

MP3/WMA MODE

To repeat a track,

The section of the title is repeated until

you press the A-B button L again.

➮ press the PLAY MODE button J

repeatedly until “REPEAT ONE” is

shown on the lowest line of the

external display.

Interrupting playback (PAUSE)

➮ Press the button 6 9.

“PAUSE“ appears on the display.

Cancelling pause

To repeatedly play all the tracks of a

directory,

➮ press the PLAY MODE button J

repeatedly until “REPEAT FOLD-

ER” is shown on the lowest line of

the external display.

➮ During the pause, press the but-

ton 6 9.

Playback is continued.

You can also interrupt and continue

playback using the button A on the

remote control.

To cancel REPEAT,

➮ press the PLAY MODE button J

repeatedly until “FOLDER” is

shown on the lowest line of the

external display.

Selecting MP3 info

If you want to select the “MP3 INFO”

display mode, you first have to activate

this function in the menu. In order for

the system to be able to display MP3

information, the information must be

stored on the CD in the form of ID tags

together with the MP3 files.

Repeated playback of a defined

section of a title

You can use the remote control to de-

fine a section of a title and repeat it

endlessly in a loop.

➮ Press the MENU•OK button 7.

Note:

This function is operable only if an

external display is connected.

➮ Press the or button 6 re-

peatedly until “VARIOUS MENU”

appears on the display.

To define the starting point of the sec-

tion,

➮ Press the MENU•OK button 7.

➮ listen to a title and press the A-B

button L on the remote control at

the point where you want the re-

peat function to start.

➮ Press the or button 6

repeatedly until “MP3 INFO”

appears on the display.

➮ Use the

buttons 6 to switch

To define the ending point of the sec-

tion,

between the “ON” and “OFF”

options.

➮ continue listening to the title and

press the A-B button L on the

remote control at the point where

you want the repeat function to

end.

When you have finished making your

changes,

➮ press the MENU•OK button 7

and then the DIS•ESC button 5

to exit the menu.

MP3/WMA MODE

CD-CHANGER MODE

CD-changer mode

Displaying scrolling texts

(scroll)

The selected information title, track

names or file name and directory name

are shown once as scrolling text when

the title changes.

Note:

Information on handling CDs, in-

serting CDs and operating the CD

changer can be found in the oper-

ating instructions supplied with

your CD changer.

To display the information again as

scrolling text,

Switching to CD-changer mode

➮ briefly press the 5 SCL button 9.

➮ Press SRC ; on the device or

the SOURCE button ; on the re-

mote control repeatedly until

Note:

The information is displayed as

scrolling text if it contains more

than 13 characters in Normal/Info

mode, more than 11 characters in

Browse mode or more than 8

characters in Clock mode.

“CDC” appears on the display.

The device starts playing the first CD

that the CD changer detects.

Selecting CDs

To move up or down to another CD,

➮ press the or button 6 on the

device or the or button 6 of

the remote control once or several

times.

Note:

The device will ignore empty CD

slots in the changer and slots con-

taining invalid CDs.

Selecting tracks

To move up or down to another track

on the current CD,

➮ press the or button 6 on the

device or the or button 6 of

the remote control once or several

times.

CD-CHANGER MODE

➮ Press the MENU•OK button 7.

Fast searching (audible)

➮ Press the or button 6

repeatedly until “CD NAME” or

“DISC NUMBER” appears on

the display.

To fast search backwards or forwards,

➮ hold one of the

buttons 6

pressed on the device or the or

button 6 of the remote control

until the fast searching backwards

or forwards starts.

➮ Use the

buttons 6 to switch

between the “CD NAME” and

“DISC NUMBER” options.

Changing the display

You can choose from various display

options in CD mode:

When you have finished making your

changes,

➮ press the MENU•OK button 7

and then the DIS•ESC button 5

to exit the menu.

●

“NORMAL MODE”:

First line: Track number

Second line: CD number/CD

name and playing time

Repeating individual tracks or

whole CDs (REPEAT)

To repeat the current track,

“CLOCK MODE”:

First line: Track number.

Second line: CD number/CD

name and clock time

➮ briefly press the RPT 4 button 9.

“REPEATTRACK” appears briefly and

RPT lights up on the display.

„MINIMAL MODE”:

First line: Track number.

To repeat the current CD,

To switch between the display options,

➮ press the RPT 4 button 9 again.

➮ press the DIS•ESC button 5.

“REPEAT CD” appears briefly and RPT

lights up on the display.

In the menu you can choose to display

the CD name (if available) instead of

the CD number. (For further informa-

tion, please read the “Naming CDs”

section):

Cancelling REPEAT

To stop the current track or current CD

from being repeated,

➮ Press the MENU•OK button 7.

➮ repeatedly press button RPT 4

9 until “REPEAT OFF” appears

in the display and RPT disap-

pears.

➮ Press the or button 6 re-

peatedly until “VARIOUS MENU”

appears on the display.

CD-CHANGER MODE

Stopping SCAN

Random track play (MIX)

To stop scanning,

To play the tracks on the current CD in

random order,

➮ press and hold down the

MENU•OK button 7 for longer

than two seconds.

➮ briefly press the 1 MIX button 9.

“MIX CD” appears briefly and MIX lights

up on the display.

The currently scanned track will then

continue to be played normally.

To play the tracks on all inserted CDs

in random order,

Naming CDs

➮ briefly press the 1 MIX button 9.

The car sound system allows you to

assign names for up to 30 CDs so that

you can recognise them more easily.

The names can be a maximum of sev-

en characters long.

“CD NAME FULL” will appear on the

display if you try assigning more than

30 names.

“MIX ALL” appears briefly and MIX

lights up on the display.

Cancelling MIX

➮ Press the 1 MIX button 9 repeat-

edly until “MIX OFF” is displayed.

Scanning all tracks on all CDs

(SCAN)

Entering/editing CD names

➮ Listen to the CD that you want.

➮ Press the MENU•OK button 7.

To scan (briefly play) all the tracks on

all the inserted CDs in ascending or-

der,

➮ Press the or button 6

repeatedly until “VARIOUS

➮ press and hold down the

MENU•OK button 7 for longer

than two seconds.

MENU” appears on the display.

➮ Press the MENU•OK button 7.

“SCAN” and the selected display mode

appear alternately on the display.

➮ Press the or button 6

repeatedly until “CD NAME EDIT”

appears on the display.

Note:

You can set the scanning time.

For further information, please

read the section entitled “Setting

the scanning time” in the “Radio

mode” chapter.

➮ Press the MENU•OK button 7.

You will now enter editing mode.

If your CD does not have a name yet,

“ABCDEFG” appears on the display.

The currently active text input position

flashes.

CD-CHANGER MODE

➮ Use the

buttons 6 to select

Deleting all CD names

the character that you want. If you

want an empty space, simply se-

lect the underscore.

You can delete all the CD names stored

in the car sound system.

➮ Listen to a CD.

➮ Use the or button 6 to move

from one text input position to an-

other.

➮ Press the MENU•OK button 7.

➮ Press the or button 6

repeatedly until “VARIOUS

When you have finished making your

changes,

MENU” appears on the display.

➮ Press the MENU•OK button 7.

➮ press the MENU•OK button 7

and then the DIS•ESC button 5

to exit the menu.

➮ Press the or button 6

repeatedly until “CD NAME EDIT”

appears on the display.

Deleting a CD name

➮ Press the MENU•OK button 7.

➮ Listen to the CD whose name you

The name of the current CD is dis-

played.

want to delete.

➮ Press the MENU•OK button 7.

➮ Press and hold down the

MENU•OK button 7. After ap-

prox. four seconds you will hear a

beep and “DELETE NAME” ap-

pears on the display. Continue

holding the button pressed down

until you hear a second beep and

“DELETE ALL” appears on the dis-

play.

➮ Press the or button 6 re-

peatedly until “VARIOUS MENU”

appears on the display.

➮ Press the MENU•OK button 7.

➮ Press the or button 6

repeatedly until “CD NAME EDIT”

appears on the display.

➮ Press the MENU•OK button 7.

➮ Release the MENU•OK button 7.

The name of the current CD is

displayed.

The CD names will be deleted.

➮ To exit the menu, press the

MENU•OK button 7 and twice

DIS•ESC 5.

➮ Press and hold down the

MENU•OK button 7. After ap-

prox. four seconds you will hear a

beep and “DELETE NAME” ap-

pears on the display.

➮ Release the MENU•OK button

The CD name will be deleted.

➮ You can return to the menu by

pressing the MENU•OK button 7.

CLOCK TIME

Selecting 12/24-hour clock

mode

➮ Press the MENU•OK button 7.

CLOCK time

Displaying the time

You can make the clock time appear

continuously in the bottom part of the

display while any audio source is acti-

vated. For further information, please

read the “Configuring the display” sec-

tions in the relevant chapters.

➮ Press the or button 6

repeatedly until “CLOCK MENU”

appears on the display.

➮ Press the MENU•OK button 7.

➮ Press the or button 6 re-

peatedly until “24 HOUR MODE”

or “12 HOUR MODE” appears on

the display.

Setting the clock manually

To set the clock time manually,

➮ press the MENU•OK button 7.

➮ Press the or button 6 to

switch between the modes.

➮ Press the or button 6

repeatedly until “CLOCK MENU”

appears on the display.

When you have finished making your

changes,

➮ Press the MENU•OK button 7.

➮ press the MENU•OK button 7

and then the DIS•ESC button 5

to exit the menu.

➮ Press the or button 6

repeatedly until “CLOCK SET”

appears on the display.

Displaying the time

continuously when the device is

off and the ignition is on

To display the time when the device is

off and the vehicle ignition is on,

➮ Press the MENU•OK button 7.

The time appears on the display. The

hours flash and can be adjusted.

➮ Set the hours using the

but-

tons 6.

➮ press the MENU•OK button 7.

Once the hours are set,

➮ press the button 6.

The minutes flash.

➮ Press the or button 6

repeatedly until “CLOCK MENU”

appears on the display.

➮ Set the minutes using the

➮ Press the MENU•OK button 7.

buttons 6.

➮ Press the MENU•OK button 7

and then the DIS•ESC button 5.

CLOCK TIME

SOUND

➮ Press the or button 6 re-

peatedly until “OFF CLOCK OFF”

or “OFF CLOCK ON” appears on

the display.

Sound

You can adjust the sound settings (bass

and treble) separately for each source

(radio, DVD/CD, CD changer, AUX).

The volume distribution settings (bal-

ance and fader) apply to all the audio

sources.

➮ Press the or button 6 to

switch between the ON/OFF

settings.

Note:

When you have finished making your

changes,

Instead of the AUDIO button :

on the device, you can also use

the 3D button : on the remote

control.

➮ press the MENU•OK button 7

and then the DIS•ESC button 5

to exit the menu.

Adjusting the bass

➮ Press the AUDIO button :.

➮ Press the or button 6 to

adjust the bass.

➮ Press the AUDIO : button to

close the menu, or press the or

button 6 to make further

changes to the settings.

Adjusting the treble

➮ Press the AUDIO button :.

➮ Press the or button 6

repeatedly until “TREBLE”

appears on the display.

➮ Press the or button 6 to

adjust the treble.

➮ Press the AUDIO : button to

close the menu, or press the or

button 6 to make further

changes to the settings.

SOUND

X-BASS

Setting the left/right volume

distribution (balance)

To adjust the left/right volume distribu-

tion (balance),

X-BASS

X-BASS means raising the bass at low

volume.

Adjusting the X-BASS boost

➮ Press the AUDIO button :.

The X-BASS boost (Level) can be set

in steps ranging from 0 to 6 for one of

the following frequencies: 32 Hz, 40 Hz,

50 Hz, 63 Hz or 80 Hz.

➮ Press the or button 6 repeat-

edly until “BALANCE” appears on

the display.

➮ Press the or button 6 to ad-

“LVL 0” means that no X-BASS boost

will be applied, and “LVL6” means that

X-BASS will be boosted by the maxi-

mum amount.

just the balance (right/left).

➮ Press the AUDIO : button to

close the menu, or press the or

button 6 to make further

➮ Press the AUDIO button : on the

device or 3D : on the remote

control.

changes to the settings.

Adjusting the front/rear volume

distribution (fader)

“BASS” appears on the display.

To adjust the front/rear volume distri- ➮ Press the or button 6 re-

bution (fader),

peatedly until “X-BASS” appears

on the display.

➮ Press the AUDIO button :.

➮ Press the MENU•OK button 7 or

➮ Press the or button 6

repeatedly until “FADER” appears

on the display.

ENTER > on the remote control.

The X-Bass menu is displayed. The

frequency flashes.

➮ Press the or button 6 to

➮ Press the or button 6 to set

adjust the fader (front/rear).

the frequency that you want.

➮ Press the AUDIO : button to

close the menu, or press the or

button 6 to make further

➮ Press the button 6.

The boost level (LVL) flashes.

changes to the settings.

➮ Press the or button 6 to set

the boost level that you want.

➮ Press the AUDIO button :.

EQUALIZER

Equalizer

The device features a digital equalizer

DEQ.

To deactivate the equalizer,

➮ press the or button 6 re-

peatedly until “EQ OFF” appears

on the display.

This means you have three 5-band

equalizers, six sound presets and sev-

en vehicle presets at your disposal.

➮ Press the MENU•OK button 7

and then the DIS•ESC 5.

You can configure the EQ1 - EQ3

equalizers manually. When doing so

you can adjust (boost or reduce) one

frequency of an equalizer band as well

as the quality factor, i.e. the width of

the filter.

Selecting sound presets

You can select sound presets for the

following music types.

●

POP

ROCK

The following bands are available:

TECHNO

JAZZ

●

LOW 1

LOW 2

HIGH 1

HIGH 2

HIGH 3

20 - 250 Hz

CLASSIC

SPEECH

315 - 20,000 Hz

The settings for these music styles

have already been programmed.

➮ Press the DEQ button 8.

Switching the equalizer on/off

To switch the equalizer on/off,

➮ press the DEQ button 8.

➮ Press the or button 6 re-

peatedly until “SOUND PRE-

SETS”

appears on the display.

The equalizer menu appears on the

display.

➮ Press the MENU•OK button 7 or

ENTER > on the remote control.

To activate the equalizer,

➮ Press the or button 6 re-

peatedly until the sound preset

that you want is displayed.

➮ select one of the sound presets or

adjust the equalizer manually. For

further details on this, please read

the sections that follow in this

chapter.

➮ Press the MENU•OK button 7 and

then the DIS•ESC 5.

The settings are saved.

EQUALIZER

Selecting vehicle presets

You can select optimised equalizer

settings for the following vehicle types:

Manually adjusting the

equalizer

Notes on adjusting the settings

●

COMPACT

4DOOR

CONVERT

VAN

ROADSTER

MINI

We recommend you use a CD that you

are familiar with for making changes

to the settings.

Before adjusting the equalizer, set the

sound and volume distribution settings

to zero and deactivate X-BASS. For

further information, please read the

“Sound” chapter.

TRUCK

The settings for these vehicle types

have already been programmed.

➮ Listen to the CD.

➮ What kind of impression does the

➮ Press the DEQ button 8.

sound make?

➮ Press the or button 6

repeatedly until “CAR PRESETS”

appears on the display.

➮ Now read the “Sound impression”

column in the table entitled “Help

adjusting the equalizer”.

➮ Press the MENU•OK button 7 or

➮ Set the equalizer values as de-

ENTER > on the remote control.

scribed in the “Measures” column.

➮ Press the or button 6

repeatedly until the vehicle type

that you want is displayed.

Making adjustments

➮ Press the DEQ button 8.

➮ Press the MENU•OK button 7

➮ Press the or button 6 re-

peatedly until “MANUAL EQ” ap-

pears on the display.

and then the DIS•ESC 5.

The settings are saved.

➮ Press the MENU•OK button 7

or ENTER > on the remote

control.

➮ Press the or button 6

repeatedly until the equalizer that

you want to configure (“USER

EQ1”, “USER EQ2” or “USER

EQ3”) appears on the display.

➮ Press the MENU•OK button 7.

EQUALIZER

➮ Press the or button 6 re-

peatedly until the equalizer band

that you want to configure

(“LOW1”, “LOW2”, “HIGH1”,

“HIGH2” or “HIGH3”)

Note:

Please note that you can boost or

reduce one frequency in each

equalizer band. Proceed in the

way described above with all the

equalizer bands that you want to

adjust.

appears on the display.

➮ Press the MENU•OK button 7.

➮ Press the MENU•OK button 7

and then the DIS•ESC button 5

repeatedly or the DEQ button 8.

➮ Press the or button 6

repeatedly until the frequency

that you want is displayed.

The settings are saved.

➮ Press the MENU•OK button 7.

The top line displays the GAIN and

the quality factor “Q”. The gain setting

flashes. You can use the quality fac-

tor to adjust the width of the filter. The

higher you set the value for the qual-

ity factor the more directly the filter will

be applied to the selected frequency.

To adjust the gain,

➮ press the or button 6.

To adjust the quality factor,

➮ press the button 6.

The quality factor setting flashes.

➮ Press the or button 6

repeatedly until the setting that

you want is displayed.

EQUALIZER

Help adjusting the equalizer

Sound Impression/problem

Measures

Bass sound is too weak.

Increase bass with

Frequency: 32 to 160 Hz

Gain: +4 to +6

Dirty bass.

Booming sound.

Reduce the lower mid level with

Frequency: 400 Hz

Unpleasant pressure.

Gain: approx. -4

Sound very much in the foreground,

aggressive, no stereo effect.

Reduce the mid level with

Frequency: 1,000 to 2,500 Hz

Gain: -4 to -6

Dull sound.

Little clarity.

No brilliance to the instruments.

Boost the treble range with

Frequency: 6,300 to 10,000 Hz

Gain: +2 to +4

DISPLAY

When you have finished making your

changes,

Adjusting the display

settings

➮ press the MENU•OK button 7

and then the DIS•ESC button 5

to exit the menu or the DIMMER

button G on the remote control.

Adjusting the display

brightness

If your car sound system is connected

as described in the installation instruc-

tions, the display brightness of the in-

ternal display switches with the head-

lights. You can adjust the display bright-

ness separately for night and day in

steps ranging from 1 - 16.

Adjusting the viewing angle

You can adjust the display’s viewing

angle to suit the installation position of

the device in your vehicle.

➮ Press the MENU•OK button 7.

➮ Press the or button 6

repeatedly until “DISPLAY MENU”

appears on the display.

Note:

The brightness of a connected

display can be set in the DVD set-

up. For further details, read the

section “DVD setup” in the “DVD

mode” chapter.

➮ Press the MENU•OK button 7 or

the DIMMER button G on the

remote control

➮ Press the or button 6 re-

peatedly until “ANGLE” appears

on the display with the current set-

ting.

➮ Press the MENU•OK button 7.

➮ Press the or button 6 re-

peatedly until “DISPLAY MENU”

appears on the display.

➮ Press the or button 6 to ad-

➮ Press the MENU•OK button 7.

just the viewing angle.

When you have finished making your

changes,

➮ Press the DIMMER button G on

the remote control.

➮ press the MENU•OK button 7

and then the DIS•ESC button 5

or the DIMMER button G on the

remote control to exit the menu.

➮ Press the or button 6 re-

peatedly until “DAY” or “NIGHT”

appears on the display with the

current setting.

➮ Press the or button 6 to

switch between the brightness l

evels.

EXTERNAL AUDIO SOURCES

When you have finished making your

changes,

External audio sources

In addition to the CD changer, you can

also connect another external audio

source equipped with a line output. If

no CD changer is connected to the

device, you can connect two external

audio sources. Audio sources can, for

example, be portable CD players, Mi-

niDisc players or MP3 players.

➮ press the MENU•OK button 7

and then the DIS•ESC button 5

to exit the menu.

Note:

If the AUX input is switched on,

you can select it by pressing the

SRC button ;.

TheAUX input must be activated in the

menu.

An adapter cable is needed to connect

an external audio source instead of a

CD changer. You can obtain this cable

(Blaupunkt no.: 7 607 897 093) from

your authorised Blaupunkt dealer.

Information about where to connect an

audio source to theAUX2 input can be

found in the installation instructions.

Switching the AUX input on/off

➮ Press the MENU•OK button 7.

➮ Press the or button 6

repeatedly until “AUX MENU”

appears on the display.

➮ Press the MENU•OK button 7.

➮ Repeatedly press the or but-

ton 6 until “AUX2” or “AUX1”

appears on the display.

If a CD changer is connected, “AUX1”

is not available.

➮ Use the

buttons 6 to switch

between the “ON” and “OFF” op-

tions.

AMPLIFIER/SUB-OUT

Amplifier/sub-out

When you have finished making your

changes,

The car sound system provides con-

nections that allow you to connect ex-

ternal amplifiers. In addition, you can

connect an amplifier to the integrated

low-pass filter to operate a subwoofer.

For this purpose, the amplifiers must

be connected as described in the in-

stallation instructions.

➮ press the MENU•OK button 7

and then the DIS•ESC button 5

to exit the menu.

Switching the dual zone on/off

If you connected the RC 13 H remote

control (available as optional equip-

ment) via an adapter, the rear loud-

speakers are switched off. You can lis-

ten to the audio playback from the DVD/

CD mode via the headphone outputs

of the RC 13 H while the driver listens

to a different source via the front loud-

speakers.

Switching the internal amplifier

on/off

If you are using external amplifiers, you

can switch off the device’s internal

amplifier (“INT AMP OFF” setting).

Note:

➮ Press the MENU•OK button 7.

Please check this setting if the

loudspeakers do not emit any

sound.

➮ Press the or button 6

repeatedly until “VARIOUS

MENU” appears on the display.

➮ Press the MENU•OK button 7.

➮ Press the MENU•OK 7, to

➮ Press the or button 6 re-

peatedly until “VARIOUS MENU”

appears on the display.

display the menu.

➮ Press the or button 6

repeatedly until “DUAL ZONE ON”

or “DUAL ZONE OFF” appears on

the display.

➮ Press the MENU•OK 7, to dis-

play the menu.

➮ Press the or button 6

repeatedly until “INT AMP ON” or

"INT AMP OFF" appears on the

display.

➮ Use the

buttons 6 to choose

between “DUAL ZONE ON” and

“DUAL ZONE OFF”.

When you have finished making your

changes,

➮ Use the

buttons 6 to choose

between “INT AMP ON” and “INT

➮ press the MENU•OK button 7

and then the DIS•ESC button 5

to exit the menu.

AMP OFF”.

SPECIFICATIONS

FM mono sensitivity:

17 dbf

Specifications

Amplifier

Output power:

FM frequency response:

18 W RMS x 4 ch

@ 14.4V

35 - 16,000 Hz

@ 4 Ohm

@ 1% THD

DVD

Supported formats:

Tuner

Wavebands in the US:

FM:

DVD±R,

DVD±RW,

SVCD, VCD,

JPEG.

87.5 - 107.9 MHz

(200 kHz step)

530 - 1710 kHz

(10 kHz step)

Dolby Digital Coaxial™ output

AM:

Video output

PAL/NTSC support

Wavebands in Europe:

FM:

87.5 - 108 MHz

(100 kHz step

auto/50 kHz

manual)

531 - 1602 kHz

(9 kHz step)

Supported formats:

CD,

CD-R,

CD-RW.

AM:

Frequency response:

20 - 20,000 Hz

Wavebands in Thailand:

Pre-amp out

FM:

87.5 - 108 MHz

(50 kHz step auto/

25 kHz step

manual)

531 - 1602 kHz

(9 kHz step)

4 channels:

2 V

Input sensitivity

AUX input: 2 V / 6 kΩ

AM:

Tel./Navi input: 10 V / 1 kΩ

Wavebands in South America:

FM:

87.5 - 107.9 MHz

(100 kHz step auto/

50 kHz step

manual)

AM:

530 - 1710 kHz

(10 kHz step)

Subject to changes!

Please keep the filled-in radio pass in a safe place!

Prière de conserver soigneusement la carte d’autoradio

remplie !

¡Favor guardar el documento del aparato debidamente

llenado en un lugar seguro!

Por favor, guardar o cartão preenchido do aparelho num

lugar seguro!

257

Country:

Phone:

Fax:

WWW:

Germany

Austria

Belgium

Denmark

Finland

France

(D)

(A)

(B)

0180-5000225

01-610 39 0

02-525 5444

05121-49 4002

01-610 39 391

02-525 5263

44-898 644

09-435 99236

01-4010 7320

01-89583 8394

210 94 12 711

01-46 66 706

02-369 62464

40 2085

http://www.blaupunkt.com

(DK) 44-898 360

(FIN) 09-435 991

(F)

01-4010 7007

Great Britain (GB) 01-89583 8880

Greece

Ireland

Italy

(GR) 210 94 27 337

(IRL) 01-46 66 700

(I)

02-369 62331

40 4078

Luxembourg (L)

Netherlands (NL) 0800 400 1010

0800 400 1040

66-817 157

2185 00165

Norway

Portugal

Spain

(N)

(P)

(E)

(S)

66-817 000

2185 00144

902 52 77 70

08-7501850

91 410 4078

08-7501810

01-8471650

02-6130 0514

76 511 809

022-8771260

0212-346 00 40

708-6817188

Sweden

Switzerland (CH) 01-8471644

Czech. Rep. (CZ) 02-6130 0446

Hungary

Poland

Turkey

USA

Brasil

(H)

76 511 803

(PL) 0800-118922

(TR) 0212-335 06 71

(USA) 800-2662528

(Mercosur)

Malaysia

(Asia Pacific) (MAL) +604-6382 474

(BR) 0800 7045446

+55-19 3745 2773

+604-6413 640

Gerätepass

Long Beach DVD35

....................................................

Name:

Typ:

7 645 680 310

....................................................

Serien-Nr: BP ...............................................

Blaupunkt GmbH, Robert-Bosch-Straße 200, D-31139 Hildesheim

07/05 - CM/ASA

(gb, fr, es, pt)

8622404324

Avanti ORC2519SS User Manual
Behringer VP1220F User Manual
Casio Graphing Calculator FX9750GIISC User Manual
Dual XHD6420 User Manual
DXG Technology DXG 305V User Manual
Hamilton Beach 52230C User Manual
Hitachi Camcorder VM ACV23E User Manual
Hobie 21380001 User Manual
Jabra BTE4 User Manual
JVC Everio Digital Camcorder GZEX555BUS User Manual