R
EN
FR
ES
MP3/WMA/AAC CD Receiver
CDE-9881
• OWNER’S MANUAL
Please read before using this equipment.
• MODE D’EMPLOI
Veuillez lire avant d’utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Shinagawa-ku,
Tokyo 141-0031, Japan
Phone 03-5496-8231
Phone 03-8787-1200
Phone 02-484781
ALPINE ELECTRONICS GmbH
Frankfurter Ring 117, 80807 München, Germany
Phone 089-32 42 640
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS (BENELUX) GmbH
Leuvensesteenweg 510-B6,
1930 Zaventem, Belgium
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto,
Ontario M3J 2M9, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
Phone 02-725-13 15
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
YAMAGATA (Wuxi) Co., Ltd.
Block 28-25, Changjiang Nanlu, WND, jiangsu, China
Designed by ALPINE Japan
Printed in China (Y)
68-08564Z04-A
Installation and Connections
Warning .................................................. 23
Caution ................................................... 23
Precautions ............................................ 23
Installation ...................................................... 24
Connections .................................................... 26
LIMITED WARRANTY
2-EN
Operating Instructions
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN
INSERTION SLOTS OR GAPS.
WARNING
Doing so may result in personal injury or damage to the product.
WARNING
This symbol means important instructions.
Failure to heed them can result in serious injury
or death.
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle
in a safe location before performing these functions. Failure to do
so may result in an accident.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Center for repairing.
PRECAUTIONS
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISES WHILE DRIVING.
Product Cleaning
Excessive volume levels that obscure sounds such as emergency
vehicle sirens or road warning signals (train crossings, etc.) can be
dangerous and may result in an accident. LISTENING AT LOUD
VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING
DAMAGE.
Use a soft dry cloth for periodic cleaning of the product. For more
severe stains, please dampen the cloth with water only. Anything
else has the chance of dissolving the paint or damaging the plastic.
Temperature
Be sure the temperature inside the vehicle is between +60°C
(+140°F) and –10°C (+14°F) before turning your unit on.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead of
the vehicle and cause an accident.
Moisture Condensation
You may notice the CD playback sound wavering due to
condensation. If this happens, remove the disc from the player and
wait about an hour for the moisture to evaporate.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
Damaged Disc
Do not attempt to play cracked, warped, or damaged discs. Playing
result in fire, etc.
a bad disc could severely damage the playback mechanism.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
Maintenance
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service
Station for servicing.
USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.
Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire,
electric shock or other injury.
3-EN
Never Attempt the Following
Installation Location
Do not grip or pull out the disc while it is being pulled back into the
player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power is
off.
Make sure this unit will not be installed in a location subjected to:
•
•
•
•
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
Correct Handling
Do not drop the disc while handling. Hold the disc so you will not
leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.
CORRECT
Inserting Discs
Your player accepts only one disc at a time for playback. Do not
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc.
“ERROR” will be displayed on your player if you insert a disc
incorrectly. If “ERROR” continues to be displayed even though the
disc has been inserted correctly, push the RESET switch with a
pointed object such as a ballpoint pen.
INCORRECT
CORRECT
Playing a disc while driving on a very bumpy road may result in
skips, but this will not scratch the disc or damage the player.
Disc Cleaning
New Discs
Fingerprints, dust, or soil on the surface of the disc could cause the
CD player to skip. For routine cleaning, wipe the playing surface
with a clean, soft cloth from the center of the disc to the outer edge.
If the surface is heavily soiled, dampen a clean, soft cloth in a
solution of mild neutral detergent before cleaning the disc.
To prevent the CD from jamming, “ERROR” is displayed if discs
with irregular surfaces are inserted or if discs are inserted
incorrectly. When a new disc is ejected immediately after initial
loading, use your finger to feel around the inside of the center hole
and outside edge of the disc. If you feel any small bumps or
irregularities, this could inhibit proper loading of the disc. To
remove the bumps, rub the inside edge of the hole and outside edge
of the disc with a ballpoint pen or other such instrument, then insert
the disc again.
Center Hole
Center Hole
New Disc
Disc Accessories
There are various accessories available on the market for protecting
the disc surface and improving sound quality. However, most of
them will influence the thickness and/or diameter of the disc. Using
such accessories can cause the disc to be out of standard
specifications and may create operational problems. We
recommend not using these accessories on discs played in Alpine
CD players.
Outside
(Bumps)
Bumps
Irregular Shaped Discs
Be sure to use round shape discs only for this unit and never use
any special shape discs.
Use of special shape discs may cause damage to the mechanism.
Transparent Sheet
Disc Stabilizer
4-EN
On handling Compact Discs (CD/CD-R/CD-RW)
•
•
•
•
•
•
Do not touch the surface.
Do not expose the disc to direct sunlight.
Do not affix stickers or labels.
Clean the disc when it is dusty.
Make sure that there are no bumps around the disc.
Do not use commercially available disc accessories.
Do not leave the disc in the car or the unit for a long time. Never
expose the disc to direct sunlight. Heat and humidity may damage
the CD and you may not be able to play it again.
To customers using CD-R/CD-RW
•
If a CD-R/CD-RW cannot be played back, make sure the last
recording session was closed (finalized).
Finalize the CD-R/CD-RW if necessary, and attempt playback
again.
•
About media that can be played
Use only compact discs with the label side showing the CD logo
marks below.
If you use unspecified compact discs, correct performance cannot
be guaranteed.
You can play CD-Rs (CD-Recordables)/CD-RWs (CD-
ReWritables) which have been recorded only on audio devices.
You can also play CD-Rs/CD-RWs containing MP3/WMA/AAC
formatted audio files.
•
Some of the following CDs may not play on this unit:
Flawed CDs, CDs with fingerprints, CDs exposed to extreme
temperatures or sunlight (e.g., left in the car or this unit), CDs
recorded under unstable conditions, CDs on which a recording
failed or a re-recording was attempted, copy-protected CDs
which do not conform to the audio CD industry standard.
Use discs with MP3/WMA/AAC files written in a format
compatible with this unit. For details, see pages 10-11.
ROM data other than audio files contained in a disc will not
produce sound when played back.
•
•
•
•
Windows Media and the Windows logo are trademarks, or
registered trademarks of Microsoft Corporation in the United
States and/or other countries.
Apple, the Apple logo, iPod and iTunes are trademarks of Apple
Computer, Inc., registered in the U.S. and other countries.
•
•
“MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.”
“Supply of this product only conveys a license for private,
non-commercial use and does not convey a license nor imply
any right to use this product in any commercial (i.e. revenue-
generation) real time broadcasting (terrestrial, satellite, cable
and/or any other media), broadcasting/streaming via internet,
intranets and/or other networks or in other electronic content
distribution systems, such as pay-audio or audio-on-demand
applications. An independent license for such use is required.
5-EN
3
Grasp the front panel firmly, slide to the left
then pull to remove.
, and
Getting Started
/
/ENT
(OPEN)
SOURCE/
•
The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel). This is not a
malfunction.
•
•
To protect the front panel, place it in the supplied carrying case.
When detaching the front panel, do not apply excessive force as it
may result in malfunction.
SETUP
(MUTE)
Rotary encoder
•
Do not leave the front panel open, or drive the car with the panel
open as it may result in an accident or malfunction.
RTN
Attaching
Accessory List
1
2
Insert the right side of the front panel into the main
unit. Align the groove on the front panel with the
projections on the main unit.
•
•
•
•
•
•
•
Head unit ............................................................................1
Power cable........................................................................1
Mounting sleeve.................................................................1
Carrying case.....................................................................1
Bracket key.........................................................................2
Screw (M5 × 8)....................................................................4
Owner’s Manual .......................................................... 1 set
Push the left side of the front panel until it locks
firmly into the main unit.
Turning Power On and Off
Press SOURCE/ to turn on the unit.
•
•
Before attaching the front panel, make sure that there is no dirt or
dust on the connector terminals and no foreign object between the
front panel and the main unit.
Attach the front panel carefully, holding the sides of the front panel to
avoid pushing buttons by mistake.
•
The unit can be turned on by pressing any other button except TITLE
and (OPEN).
Press and hold SOURCE/ for at least 2 seconds to
turn off the unit.
•
The first time power is turned on, the volume will start from level 12.
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.
Detaching and Attaching the Front Panel
1
2
Turn off the unit power.
Detaching
Press
remove it.
(OPEN) to open the front panel, and then
1
2
Turn off the unit power.
Press
(OPEN) to open the front panel.
3
Press RESET with a ballpoint pen or similar pointed
object.
To close the front panel, press the left side until it locks as
shown in the figure below.
RESET switch
6-EN
Adjusting Volume
Radio
Turn the Rotary encoder until the desired sound is
obtained.
SOURCE/
BAND
TUNE/A.ME
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
Press
(MUTE) to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Preset buttons
(1 through 6)
Pressing
its previous level.
(MUTE) again will bring the audio back to
Listening to Radio
Setting Time
1
2
Press SOURCE/ to select TUNER mode.
1
2
Press SETUP to activate the SETUP mode.
Press BAND repeatedly until the desired radio band
is displayed.
Turn the Rotary encoder to select the CLOCK
ADJUST mode, and then press
/
/ENT.
The time indication will blink.
F1 (FM1)
F2 (FM2)
AM
F1 (FM1)
3
Turn the Rotary encoder to adjust the hours while
the time indication is blinking.
3
Press TUNE/A.ME to select the tuning mode.
DX SEEK (Distance mode)
SEEK (Local mode)
OFF (Manual mode)
DX SEEK
4
5
When the hour has been adjusted, press
/
/ENT.
•
The initial mode is Distance mode.
Turn the Rotary encoder to adjust the minutes
while the time indication is blinking.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
6
Press SETUP to return to normal mode.
Local mode:
•
To synchronize the clock to another clock/watch or radio time
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
announcement, press and hold
/
/ENT for at least 2 seconds
after setting the “hour.” Minutes will reset to “00”. If the display
shows over “30” minutes when you do this, the time will advance one
hour.
Pressing RTN will return to the previous mode.
If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
•
•
4
Press
Holding down
continuously.
or
to tune in the desired station.
or
will change the frequency
Controllable with Remote Control
This unit can be controlled with an optional Alpine remote
control. For details, consult your Alpine dealer.
Point the optional remote control transmitter at the remote
control sensor.
Remote control sensor
7-EN
Presetting Stations Manually
CD/MP3/WMA/AAC
1
2
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
/
/ENT
SOURCE/
(OPEN)
Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6) into which you wish
to store the station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
•
•
A total of 18 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2 and AM).
If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
RTN
TITLE
4
5
Rotary encoder
/ESC
Presetting Stations Automatically
Playback
1
2
Press BAND repeatedly until the desired radio band
is displayed.
1
2
Press
The front panel will open.
(OPEN).
Press and hold TUNE/A.ME for at least 2 seconds.
The frequency on the display continues to change while the
automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the
selected band. They will be stored into preset buttons 1 to 6
in order of signal strength.
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
•
If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.
Close the front panel manually, and the “DISC IN” indicator
lights up.
When a disc is already inserted, press SOURCE/ to
switch to the DISC mode.
Tuning to Preset Stations
The mode will change every time the button is pressed.
1
2
Press BAND repeatedly until the desired band is
displayed.
TUNER
DISC
iPod*
TUNER
* Only when the iPod is connected.
Press any one of the station preset buttons
(1 through 6) that has your desired radio station in
memory.
The display shows the band, preset number and frequency
of the station selected.
3
4
While playing back MP3/WMA/AAC, press
select the desired folder.
Pressing and holding
continuously.
or
to
or
will change folders
Press
or
to select the desired track (file).
Returning to the beginning of the current track (file):
Press
.
Fast backward:
Press and hold
.
Advancing to the beginning of the next track (file):
Press
.
Fast forward:
Press and hold
.
5
To pause playback, press
/
/ENT.
Pressing /ENT again will resume playback.
/
8-EN
6
After pressing
press to eject the disc.
(OPEN) to open the front panel,
M.I.X. (Random Play)
•
Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
If the CD does not eject, press and hold
The “DISC IN” indicator lights up when a disc is inserted.
The CD-player can play discs containing audio data, MP3 data,
WMA data and AAC data.
Press 5
in the play or pause mode.
The tracks (files) on the disc will be played back in random
sequence.
•
•
•
for at least 2 seconds.
To cancel M.I.X. play, press 5
again.
•
•
•
•
“MP3”is displayed during MP3 playback.
“WMA” is displayed during WMA playback.
“AAC” is displayed during AAC playback.
WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from
iTunes Music Store and files that are copy-protected (copyright
protection) cannot be played back on this unit.
The track display for MP3/WMA/AAC data playback is the file
numbers recorded on the disc.
CD mode :
: The tracks are played back in random sequence.
•
•
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
MP3/WMA/AAC mode :
: Only files in a folder are played back in
random sequence.
MP3/WMA/AAC Play Display
The folder number and file number will be displayed as
described below.
: The files are played back in random sequence.
Folder number File number
display
display
Searching from CD Text
•
Press TITLE to switch the display. See “Displaying the Text”
(page 14) for information about display switching.
Tracks can be searched and played by using the CD text on the disc. In
the case of discs that do not support text, searches can be made by using
the track numbers.
Repeat Play
1
2
Press
/ESC during play.
This will set the search mode.
Press
4 to play back repeatedly the track being
played.
Turn the Rotary encoder to select the desired
track, and then press
This will play the selected track.
The track (file) will be played repeatedly.
/
/ENT.
Press
4 again and select off to deactivate repeat play.
CD mode :
•
•
Press and hold
/ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode is canceled if no operation is performed
for 10 seconds.
CD text search cannot be made during M.I.X. play.
: Only a track is repeatedly played back.
MP3/WMA/AAC mode :
: Only a file is repeatedly played back.
: Only files in a folder are repeatedly played back.
9-EN
File/Folder Name Search
(concerning MP3/WMA/AAC)
About MP3/WMA/AAC
CAUTION
Folder and file names may be searched and displayed during playback.
Except for private use, duplicating audio data (including MP3/
WMA/AAC data) or distributing, transferring, or copying it,
whether for free or for a fee, without permission of the copyright
holder is strictly prohibited by the Copyright Act and by
international treaty.
1
2
During MP3/WMA/AAC playback, press
activate the search mode.
/ESC to
Turn the Rotary encoder to select Folder Name
Search mode or File Name Search mode, and then
press
/
/ENT.
What is MP3?
MP3, whose official name is “MPEG-1 Audio Layer 3,” is a
compression standard prescribed by the ISO, the International
Standardization Organization and MPEG which is a joint activity
institution of the IEC.
Folder Name Search mode
3
Turn the Rotary encoder to select the desired
folder.
MP3 files contain compressed audio data. MP3 encoding is
capable of compressing audio data at extremely high ratios,
reducing the size of music files to as much as one-tenth their
original size. This is achieved while still maintaining near CD
quality. The MP3 format realizes such high compression ratios
by eliminating the sounds that are either inaudible to the human
ear or masked by other sounds.
4
Press and hold
/
/ENT for at least 2 seconds to
play back the first file in the selected folder.
•
Press and hold /ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode is canceled if no operation is performed
for 10 seconds.
To search for files in the Folder Name Search mode, press
What is WMA?
•
•
WMA, or “Windows Media™ Audio,” is compressed audio data.
WMA is similar to MP3 audio data and can achieve CD quality
sound with small file sizes.
/
/ENT. Files in the folder may be searched.
Press RTN to exit Folder Name Search mode in step 3 in order to
select File Name Search mode.
•
•
The root folder is displayed as “
Folder Name Search cannot be made during M.I.X. play.
”.
What is AAC?
AAC is the abbreviation for “Advanced Audio Coding,” and is a
basic format of audio compression used by MPEG2 or MPEG4.
File Name Search mode
3
4
Press
or
to select another Folder.
Method for creating MP3/WMA/AAC files
Audio data is compressed using software with MP3/WMA/AAC
codecs. For details on creating MP3/WMA/AAC files, refer to the
user’s manual for that software.
Select the desired file by turning the Rotary
encoder.
MP3/WMA/AAC files that are playable on this device have the
file extensions “mp3” / “wma” / “m4a.” Files with no extension
cannot be played back (WMA ver. 7.1 , 8 and 9 are supported).
Protected files are not supported, neither are raw AAC files
(using the “.aac” extension).
5
•
Press
/
/ENT to play back the selected file.
Press and hold
/ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode is canceled if no operation is performed
for 10 seconds.
•
•
Press RTN in the search mode to return to the previous mode.
File Name Search cannot be made during M.I.X. play.
There are many different versions of the AAC format. Confirm
that the software being used conforms to the acceptable
formats listed above. It’s possible that the format may be
unplayable even though the extension is valid.
Playback of AAC files encoded by iTunes version 6.0 or earlier is
supported.
Quick Search
You can search for tracks (files).
1
Press and hold
CD/MP3/WMA/AAC mode to activate Quick Search
mode.
/ESC for at least 2 seconds in the
2
Turn the Rotary encoder to select a desired track
(file).
The selected track is played back immediately.
•
Press and hold
/ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode is canceled if no operation is performed
for 10 seconds.
10-EN
Supported playback sampling rates and bit rates
Order of files
Files are played back in the order that the writing software writes
MP3
them to the disc. Therefore, the playback order may not be what
is expected. Verify the writing order in the software’s
documentation. The playback order of the folders and files is as
follows.
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,
16 kHz, 12 kHz, 11.025 kHz, 8 kHz
Bit rates:
8 - 320 kbps
WMA
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz
Bit rates:
48 - 192 kbps
Root folder
AAC
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,
16 kHz, 12 kHz, 11.025 kHz, 8 kHz
Bit rates:
16 - 320 kbps
This device may not play back correctly depending on sampling
rates.
ID3 tags/WMA tags
This device supports ID3 tag v1 and v2, and WMA tag.
If tag data is in an MP3/WMA/AAC file, this device can display
the title (track title), artist name, and album name ID3 tag/WMA
tag data.
This device can only display single-byte alphanumeric
characters (up to 30 for ID3 tags and up to 15 for WMA tags)
and the underscore. For non-supported characters, “NO
SUPPORT” is displayed.
The tag information may not be correctly displayed, depending
on the contents.
Folder
MP3/WMA/AAC File
Producing MP3/WMA/AAC discs
MP3/WMA/AAC files are prepared, then written to a CD-R or
CD-RW using CD-R writing software. A disc can hold up to 510
files/folders (including Root Folders), and the maximum number
of folders is 255.
Playback may not be performed if a disc exceeds the limitations
described above.
* The folder No./ folder Name will not be displayed if no file is
contained in the folder.
Terminology
Bit rate
Media supported
This is the “sound” compression rate specified for encoding. The
higher the bit rate, the higher the sound quality, but also the larger
the files.
The media that this device can play back are CD-ROMs, CD-Rs,
and CD-RWs.
Sampling rate
Corresponding File Systems
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of 44.1 kHz,
so the sound is sampled (recorded) 44,100 times per second. The
higher the sampling rate, the higher the sound quality, but also the
larger the volume of data.
This device supports discs formatted with ISO9660 Level 1 or
Level 2.
Under the ISO9660 standard, there are some restrictions to
remember.
The maximum nested folder depth is 8 (including the root
directory). The number of characters for a folder/file name is
limited.
Valid characters for folder/file names are letters A-Z (all caps),
numbers 0-9, and ‘_’ (underscore).
Encoding
Converting music CDs, WAVE (AIFF) files, and other sound files into
the specified audio compression format.
Tag
This device also can play back discs in Joliet, Romeo, etc., and
other standards that conform to ISO9660. However, sometimes
the file names, folder names, etc., are not displayed correctly.
Song information such as track titles, artist names, album names,
etc., written into MP3/WMA/AAC files.
Root folder
Formats supported
The root folder (or root directory) is found at the top of the file
system. The root folder contains all folders and files. It is created
automatically for all burned discs.
This device supports CD-ROM XA, Mixed Mode CD, Enhanced
CD (CD-Extra) and Multi-Session.
This device cannot correctly play back discs recorded with
Track At Once or packet writing.
11-EN
Setting the Bass Control
Sound Setting
You can change the Bass Frequency emphasis to create your own tonal
preference.
Rotary encoder (AUDIO/LOUD)
SOURCE/
BAND
1
Press A.SEL repeatedly to select the BASS mode.
BASS
TREBLE
HPF
BASS
Setting the Bass Center Frequency
2-1 Press BAND to select the desired bass center
frequency.
80Hz
100Hz
200Hz
60Hz
80Hz
/ESC
A.SEL
Emphasizes the displayed bass frequency ranges.
Setting the Bass Bandwidth
Adjusting Bass/Treble/Balance (Between
Left and Right)/Fader (Between Front
and Rear)/Defeat
2-2 Press SOURCE/ to select the desired bass
bandwidth.
1
Press Rotary encoder (AUDIO) repeatedly to
choose the desired mode.
Changes the boosted bass bandwidth to wide or narrow. A
wider setting will boost a wide range of frequencies above
and below the center frequency. A narrower setting will
boost only frequencies near the center frequency.
Each press changes the mode as follows:
*
SUBW
BASS
TREBLE
SUBW
BALANCE
FADER
DEFEAT
VOLUME
Subwoofer : 0 ~ +15
Bass level: –7 ~ +7
Treble level: –7 ~ +7
Balance : L15 ~ R15
Fader : R15 ~ F15
Defeat : ON/OFF
Setting the Bass Level
2
-3*1Turn the Rotary encoder to select the desired
bass level (–7~+7).
You can emphasize or weaken the bass level.
Volume : 0 ~ 35
3
Press and hold
return to normal mode.
/ESC for at least 2 seconds to
•
If no operation is performed for 5 seconds after selecting the SUBW,
BASS, TREBLE, BALANCE, FADER or DEFEAT mode, the unit
automatically returns to normal mode.
•
•
If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
The bass level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The bass
frequency and bass bandwidth settings adjusted for one source are
effective for all other sources (FM, AM, CD etc.).
* When the subwoofer mode is set to OFF, its level cannot be adjusted.
2
Turn the Rotary encoder until the desired sound is
obtained in each mode.
By setting Defeat ON, previously adjusted settings of BASS
and TREBLE will return to the factory defaults.
•
The function is inoperable when DEFEAT is set to ON.
1
* The adjustment can also be made by pressing Rotary encoder. Refer
to “Adjusting Bass/Treble/Balance (Between Left and Right)/Fader
(Between Front and Rear)/Defeat” (page 12).
12-EN
Setting the Treble Control
Turning Loudness On/Off
You can change the Treble Frequency emphasis to create your own tonal
preference.
Loudness introduces a special low- and high-frequency emphasis at low
listening levels. This compensates for the ear’s decreased sensitivity to
bass and treble sound.
1
Press A.SEL repeatedly to select the TREBLE mode.
Press and hold Rotary encoder (LOUD) for at least 2
seconds to activate or deactivate the loudness mode.
BASS
TREBLE
HPF
BASS
Setting the Treble Center Frequency
•
The function is inoperable when DEFEAT is set to ON.
2-1 Press BAND to select the desired treble center
frequency.
10.0kHz
12.5kHz
15.0kHz
17.5kHz
10.0kHz
Emphasizes the displayed treble frequency ranges.
Setting the Treble Level
2
-2*2Turn the Rotary encoder to select the desired
treble level (–7~+7).
You can emphasize the treble level.
3
Press and hold
return to normal mode.
/ESC for at least 2 seconds to
•
•
If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
The treble level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The Treble
frequency settings adjusted for one source are effective for all other
sources (FM, AM, CD, etc.).
•
The function is inoperable when DEFEAT is set to ON.
2
* The adjustment can also be made by pressing Rotary encoder. Refer
to “Adjusting Bass/Treble/Balance (Between Left and Right)/Fader
(Between Front and Rear)/Defeat” (page 12).
Adjusting the High Pass Filter
The High Pass Filter on this unit can be adjusted to suit your personal
taste.
1
2
Press A.SEL repeatedly to select the HPF mode.
BASS
TREBLE
HPF
BASS
Turn the Rotary encoder to select the desired HPF
frequency.
OFF
80Hz
120Hz
160Hz
All frequencies above the selected cutoff are output.
3
Press and hold
return to normal mode.
/ESC for at least 2 seconds to
•
•
•
If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
The Bass and Treble controls effectiveness in modifying the sound,
depends on their settings and where the HPF is set.
The function is inoperable when DEFEAT is set to ON.
13-EN
Indicator/
Mode
MP3/WMA/AAC
Mode
CD Mode
iPod Mode
––
Other Functions
2
Folder Name*
––
––
being displayed
1
1
Artist Name*
Artist Name*
being displayed being displayed
1
1
Text (Disc
Album Name* Album Name*
3
Name* ) being being displayed being displayed
displayed
TITLE
1
1
Text (Track
Song Name* / Song Name*
Name* ) being File Name being being displayed
displayed displayed
3
Displaying the Text
1
* Tag information
If there is no tag information, “ARTIST”/“ALBUM”/“SONG” is
displayed.
Text information, such as the disc name and the track name, will be
displayed if playing a CD text compatible disc. It is also possible to
display the folder name, the file name and the tag, etc., while playing
MP3/WMA/AAC files.
2
* The root folder is displayed as “FOLDER”.
3
* If there is no Text (Disc Name or Track Name), “DISC TEXT”/
“TRACK TEXT” is displayed.
Press TITLE.
The display will change every time the button is pressed.
About “Text”
•
If you want to change the display when the text scroll is set to MANU,
press TITLE while the text is scrolling. If the scroll has been
completed, press TITLE to scroll the text again.
Text:
Text compatible CDs contain text information such as the disc
name and track name. Such text information is referred to as
“text.”
The display in Radio mode:
FREQUENCY CLOCK
•
•
•
Some characters may not be displayed correctly with this device,
depending on the character type.
“NO SUPPORT” is displayed when the desired text information
cannot be displayed on this unit.
The text or tag information may not be correctly displayed,
depending on the contents.
FREQUENCY
The display in CD mode:
TRACK NO./ELAPSED TIME
TRACK NO./CLOCK
TEXT (TRACK NAME)*
1
1
TEXT (DISC NAME)*
TRACK NO./ELAPSED TIME
The display in MP3/WMA/AAC mode:
Displaying Time
FILE NO./ELAPSED TIME
FOLDER NO./FILE NO.
FILE NO./CLOCK
ARTIST NAME*
FOLDER NAME
ALBUM NAME*
FILE NAME
2
2
2
SONG NAME*
Press TITLE repeatedly until the time is displayed.
Each press changes the display.
FILE NO./ELAPSED TIME
1
For details, see “Displaying the Text” (page 14).
* Displayed during playback of a disc with CD text.
2
* ID3 tag/WMA tag
•
Selecting any tuner or CD function while in the clock priority mode
will interrupt the time display momentarily. The function selected
will be displayed for about 5 seconds before the time returns to the
display.
If an MP3/WMA/AAC file contains ID3 tag/WMA tag information,
the ID3 tag/WMA tag information is displayed (e.g., song name,
artist name and album name). All other tag data is ignored.
•
When the power is off but the ignition key is on, press TITLE to
display or turn off the time.
About the indication display
When displaying Text, the following indicators are lit
according to the mode.
Blinks in search mode when the Rotary encoder is turned. Also
blinks when operation, such as fast forward etc., is performed.
Lights up in SETUP mode.
14-EN
Setting the Subwoofer System
SUBW. SYS 1 (Initial setting) / SUBW. SYS 2
SETUP
Select either SYS 1 or SYS 2 for the desired subwoofer effect.
SUBW. SYS 1: Subwoofer level changes according to the main
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, Sound Customizing, Visual
Customizing, etc., can be modified.
volume setting.
SUBW. SYS 2: Subwoofer level change is different from the main
volume setting. For example, even at low volume
settings, the subwoofer is still audible.
Rotary encoder
/ENT
/
Visual Customizing
Dimmer Control
DIMMER AUTO (Initial setting) / DIMMER MANU
Set the DIMMER control to AUTO to decrease the illumination
brightness of the unit with the head lights of the vehicle ON. This mode
is useful if you feel the unit’s backlighting is too bright at night.
RTN
SETUP
Scroll Type Setting
SCROLL TYPE1 / SCROLL TYPE2 (Initial setting)
Choose from two scrolling methods.
Select the type you prefer.
Use steps 1 to 4 to select one of the SETUP modes to
modify. See the applicable section below for details
about the selected SETUP item.
SCROLL TYPE1: The characters scroll from right to left, a
single character at a time.
SCROLL TYPE2: Words are built up from left to right, a single
character at a time. When the display is filled,
it is cleared and the remaining words are
displayed the same way until all words of the
title have been shown.
1
2
Press SETUP to activate the SETUP mode.
Turn the Rotary encoder to select the desired
SETUP menu, and then press
/
/ENT.
(e.g. Select SUBWOOFER)
Scroll Setting (TEXT SCROLL)
SCROLL AUTO / SCROLL MANU (Initial setting)
1
CLOCK ADJUST*
LCD CONTRAST
DIMMER
2
SUBWOOFER
(SUBW. SYSTEM) *
This CD player can scroll the disc and track names recorded on
CD-TEXT discs, as well as the text information of MP3/WMA/AAC
files, folder names and tags.
PLAY MODE
POWER IC
SCROLL TYPE
LANGUAGE
TEXT SCROLL
DEMO CLOCK ADJUST
1
* Refer to “Setting Time” (page 7).
* Displayed only when SUBW is on.
2
SCROLL AUTO: The CD text information, the text information of
folder and file names, and the tags are
scrolled automatically.
3
Turn the Rotary encoder to change the setting.
(e.g. Select SUBW. ON or SUBW. OFF.)
SCROLL MANU: The display is scrolled when a disc is loaded
or when a track is changed, etc.
4
•
•
Press SETUP to return to normal mode.
•
The unit scrolls CD text names, folder names, file names or tag
display.
Press RTN to return to the previous mode.
If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Sound Customizing
Subwoofer On and Off
SUBW. ON (Initial setting) / SUBW. OFF
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
1 In the normal mode, press Rotary encoder repeatedly to
select the SUBW mode.
SUBW
DEFEAT
BASS
VOLUME
TREBLE
SUBW
BALANCE
FADER
2 Adjust the level by turning the Rotary encoder.
15-EN
Setting the Language Font
LANGUAGE 1 (Initial setting) / LANGUAGE 2
External Device
Two types of font can be selected.
Connecting to an External Amplifier
LANGUAGE 1:
Normal font
POWER IC ON (Initial setting) / POWER IC OFF
LANGUAGE 2 : European font
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
Adjusting Display Contrast
CONTRAST
POWER IC OFF: Use this mode when the line output of this unit
is used to drive an external amplifier. In this
setting, the head unit’s internal amplifier is
You can adjust the display contrast for better visibility.
turned OFF and cannot drive speakers.
You can adjust in a range of -5 and +3
•
The initial setting at the factory is “0.”
Front
left
Demonstration
DEMO ON / DEMO OFF (Initial setting)
Amplifier
Front
right
This unit has a demonstration feature for the display.
Rear
left
•
To quit Demo mode, set to DEMO OFF.
Amplifier
Rear
right
MP3/WMA/AAC
Playing MP3/WMA/AAC Data (Play Mode)
CD-DA (Initial setting) / CD-DA&MP3
POWER IC ON : The speakers are driven by the built-in
amplifier.
This unit can play back CDs containing both CD and MP3/WMA/AAC
data (created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case,
you can select playback of a single session only, containing the CD data.
When a disc contains both CD and MP3/WMA/AAC data, playback
starts from the CD data portion of the disc.
Speakers
SPEAKER
RIGHT FRONT
Front
right
CD-DA:
Only the CD data in Session 1 can be played back.
SPEAKER
RIGHT REAR
CD-DA&MP3: CD data, MP3/WMA/AAC files in mixed mode, and
Rear
right
multi-session discs can be played back.
•
Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first.
SPEAKER
LEFT REAR
Rear
left
SPEAKER
LEFT FRONT
Front
left
•
No sound is produced by the system when the power output is set to
OFF.
16-EN
®
Searching for a desired Song
iPod (Optional)
An iPod can contain hundreds of songs. By using file tag information
and keeping these songs organized in playlists, this unit’s search
functions will ease song searches.
Each music category has its own individual hierarchy. Use the Playlist/
Artist/Album/Song/Podcast/Genre/Composer search mode to narrow
searches based on the table below.
4
5
6
Rotary encoder
/ENT
/
SOURCE/
Hierarchy 1
Playlist
Hierarchy 2
Song
Hierarchy 3
Hierarchy 4
—
Song
—
—
—
Artist*
Album*
Song
Album*
Song
—
—
—
—
Podcast
Genre*
Episode
Artist*
Album*
—
—
TITLE
RTN
/ESC
Preset buttons
(1 through 6)
Album*
Song
Song
—
Composer*
®
An iPod can be connected to this unit by using the proprietary
ALPINE FULL SPEED Connection Cable (KCE-422i) (sold
For example: Searching by Artist name
™
The following example explains how an ARTIST search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
saparately). When this unit is connected by using the cable, the controls
on the iPod are not functional.
iPods usable with this unit
1
2
Press
/ESC to activate the search selection mode.
•
The unit can be used with the fourth generation and above
iPod, iPod photo, iPod minis or iPod nano. iPod Shuffle
cannot be used, however.
Turn the Rotary encoder to select the ARTIST
search mode, and then press /ENT.
/
•
•
Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
The unit can be used with the following iPod versions.
Correct function of earlier versions cannot be guranteed.
PLAYLIST
GENRE
ARTIST
COMPOSER
ALBUM
SONG
PODCAST
PLAYLIST
3
4
Turn the Rotary encoder to select the desired
Artist, and then press /ENT.
/
Fourth generation iPod: Ver. 3.1.1
Fifth generation iPod: Ver. 1.1.2
iPod photo: Ver.1.2.1
iPod mini: Ver.1.4.1
iPod nano: Ver.1.2
Turn the Rotary encoder to select the desired
Album, and then press /ENT.
/
•
The unit cannot be used with software versions earlier than
“2006-06-28”. For details about “iPod Software Update”, refer
to the iPod Instruction Manual.
Playback
1
2
Press SOURCE/ to switch to the iPod mode.
Press or to select the desired song.
Return to the beginning of the current song:
Press
.
Fast backward of the current song:
Press and hold
.
Advance to the beginning of the next song:
Press
.
Fast forward of the current song:
Press and hold
.
3
To pause playback, press
/
/ENT.
Pressing /ENT again will resume playback.
/
•
A song playing on the iPod while it is connected to this unit will
continue to play from where it was paused after disconnection.
17-EN
5
Turn the Rotary encoder to select the desired
Song, and then press
/
/ENT.
Direct Search Function
•
After pressing and holding
/
/ENT for at least 2 seconds while
The unit’s direct search function can be used to search for an album,
song, etc., more efficiently. In Playlist/Artist/Album/Song/Podcast/
Genre/Composer mode, you can quickly target any song.
in each hierarchy (except SONG hierarchy), all songs of the selected
hierarchy are played back.
After selecting [ALL] in the search mode with“*”, press and hold
•
•
/
/ENT for at least 2 seconds to play back all songs in the iPod
In the search mode, press any one of the preset
buttons (1 through 6) to quickly skip over a
designated percent of your song content.
Song search example:
If there are 100 songs in your iPod, they are divided into 6
groups using percentages (shown below). These groups are
assigned to the preset buttons (1 through 6).
or selected search mode.
While in the search mode, if you press and hold
/ESC for 2
seconds, or no operation is performed for 10 seconds, the search
mode is canceled.
In the search mode, pressing RTN will return to the previous mode.
Search cannot be made during M.I.X. play.
“NO SONG” will be displayed if there are no songs in the selected
playlist in the PLAYLIST search mode.
“NO PODCAST” will be displayed if there is no podcast data in the
iPod in the PODCAST search mode.
•
•
•
Example 1:
•
•
Suppose the song you are searching for is located at around
the middle (50%) of your library: press button 4 to jump to the
50th song and turn the Rotary encoder to find the desired
song.
If “iPod name” stored in the iPod is selected in the desired Playlist
search mode, and
songs in the iPod. Also, if you press and hold
2 seconds, all songs in the iPod are played back.
/
/ENT is pressed, you can search for all
/
/ENT for at least
Example 2:
•
•
Depending on the iPod, podcast search is not supported.
Suppose the song you are searching for is located near the
end (83%) of your library: press button 6 to jump to the 83rd
song and turn the Rotary encoder to find the desired song.
If any one of the preset buttons (1 through 6) is pressed in the search
mode, a search can be made quickly by skipping to the specified
location. For details, refer to “Direct Search Function” on page 18.
All 100 songs (100%)
0%
1
17%
33%
50%
67%
83%
6
Quick Search
Preset
buttons
2
3
4
5
You can search a song from all songs in the iPod without selecting an
album, artist, etc.
First
17th
33rd
50th
67th
83rd
Songs
song song song song song song
1
Press and hold
activate the Quick Search mode.
/ESC for at least 2 seconds to
Select Playlist/Artist/Album/Podcast/
Genre/Composer
2
Turn the Rotary encoder to select a desired song.
The selected song is played back immediately.
Playlist/Artist/Album/Podcast/Genre/Composer can be easily changed.
For example, if you listen to a song from a selected album, the album
can be changed.
•
Press and hold
/ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode is canceled if no operation is performed
for 10 seconds.
If many songs are in the iPod, it takes time to search for songs.
If any one of the preset buttons (1 through 6) is pressed in the search
mode, a search can be made quickly by skipping to the specified
location. For details, refer to “Direct Search Function” on page 18.
•
•
Press
or
to select the desired Playlist/Artist/Album/
Podcast/Genre/Composer.
•
•
•
If the song search mode was used to select a song, this function is
inactive.
If an album is selected during an artist search, other albums by that
artist are searchable.
This function is inactive during shuffle (M.I.X.) playback.
18-EN
Random Play Shuffle (M.I.X.)
Repeat Play
The Shuffle function of the iPod is displayed as M.I.X. on this unit.
Only Repeat One is available for the iPod.
Shuffle Albums:
Repeat One:
The songs on each album are played back in proper order.
Upon completion of all the songs on the album, the next album is
selected randomly. This continues until all albums have been
played.
A single song is repeatedly played back.
1
Press
4.
The song is played back repeatedly.
RPT
(off)
RPT
Shuffle Songs:
(Repeat One)
Song shuffle randomly plays back songs within a selected
category (playlist, album, etc.). The songs within the category
are played just once until all songs have been played.
2
To cancel repeat play, select (off) with the above
procedure.
1
Press 5
.
•
During repeat playback, no other songs are selectable by pressing
The songs are played back in random sequence.
or
.
M.I.X. M.I.X. (off)
(ShuffleAlbums) (Shuffle Songs)
M.I.X.
Displaying the Text
2
To cancel M.I.X. play, select (off) with the above
procedure.
You can display the tag information of a song in the iPod.
•
If a song is selected in the album search mode before selecting M.I.X.
play, the songs will not play back randomly even when Shuffle
Albums is selected.
Press TITLE.
Each press changes the display.
•
If you want to change the display when the text scroll is set to MANU,
press TITLE while the text is scrolling. If the scroll has been
completed, press TITLE to scroll the text again.
Shuffle ALL:
Shuffle ALL plays all songs in the iPod randomly. Any one song
does not play back again until all songs have been played back.
TRACK NO./ELAPSED TIME
TRACK NO./CLOCK
ALBUM NAME*
TRACK NO./ELAPSED TIME
ARTIST NAME*
SONG TITLE*
1
Press 6.
The songs are played back in random sequence.
M.I.X.
(off)
M.I.X.
* TAG information
“ARTIST”/“ALBUM”/“SONG” is displayed if there is no tag
information.
(Shuffle ALL)
2
To cancel M.I.X. play, select (off) with the above
procedure.
•
•
Only alphanumeric characters (ASCII) can be displayed.
If the artist, album or song name, created in iTunes, has too many
characters, songs may not be played back when connected to the
adapter. Therefore, a maximum of 250 characters is recommended.
The maximum number of characters for the head unit is 64
(64 byte).
•
If Shuffle ALL is selected, the selected songs being played back in the
search mode are canceled.
•
•
Some characters may not be correctly displayed.
“NO SUPPORT” is displayed if text information is not supported by
the unit.
19-EN
CD
Information
CD Player not functioning.
Out of operating temperature range +50°C (+120°F) for CD.
- Allow the vehicle’s interior (or trunk) temperature to cool.
•
In Case of Difficulty
CD playback sound is wavering.
•
Moisture condensation in the CD Module.
- Allow enough time for the condensation to evaporate (about 1
hour).
If you encounter a problem, please turn the power off, then on again. If
the unit is still not functioning normally, please review the items in the
following checklist. This guide will help you isolate the problem if the
unit is at fault. Otherwise, make sure the rest of your system is properly
connected or consult your authorized Alpine dealer.
CD insertion not possible.
•
A CD is already in the CD player.
- Eject the CD and remove it.
Basic
•
The CD is being improperly inserted.
- Make sure the CD is being inserted following instructions in
the CD Player Operation section.
No function or display.
Vehicle’s ignition is off.
•
- If connected following instructions, the unit will not operate
with the vehicle’s ignition off.
Unable to fast forward or backward the CD.
•
The CD has been damaged.
•
•
Improper power lead (Red) and battery lead (Yellow) connections.
- Check power lead and battery lead connections.
Blown fuse.
- Check the fuse of the unit; replace with the proper value if
necessary.
Internal micro-computer malfunctioned due to interference noise
etc.
- Press the RESET switch with a ballpoint pen or other pointed
article.
- Eject the CD and discard it; using a damaged CD in your unit
can cause damage to the mechanism.
CD playback sound skips due to vibration.
•
•
•
•
Improper mounting of the unit.
- Securely re-mount the unit.
The disc is very dirty.
- Clean the disc.
The disc has scratches.
- Change the disc.
The pick-up lens is dirty.
- Do not use a commercially available lens cleaner disc. Consult
your nearest Alpine dealer.
•
Radio
Unable to receive stations.
•
No antenna or open connection in cable.
- Make sure the antenna is properly connected;
replace the antenna or cable if necessary.
CD playback sound skips without vibration.
•
The disc is dirty or scratched.
- Clean the disc; damaged disc should be replaced.
Unable to tune stations in the seek mode.
Error displays (built-in CD player only).
•
You are in a weak signal area.
•
Mechanical error
- Make sure the tuner is in the DX mode.
- Press . After the error indication disappears, insert the disc
again. If the above-mentioned solution does not solve the
problem, consult your nearest Alpine dealer.
•
If the area you are in is a primary signal area, the antenna may
not be grounded and connected properly.
- Check your antenna connections; make sure the antenna is
properly grounded at its mounting location.
The antenna may not be the proper length.
- Make sure the antenna is fully extended; if broken, replace the
antenna with a new one.
CD-R/CD-RW playback not possible.
•
•
Close session (finalization) has not been performed.
- Perform finalization and attempt playback again.
MP3/WMA/AAC
Broadcast is noisy.
•
The antenna is not the proper length.
- Extend the antenna fully; replace it if it is broken.
The antenna is poorly grounded.
- Make sure the antenna is grounded properly at its mounting
location.
MP3, WMA or AAC is not played back.
•
Writing error occurred. The CD format is not compatible.
- Make sure the CD has been written in a supported format.
Refer to “About MP3/WMA/AAC” (pages 10-11), then rewrite
in the format supported by this device.
•
20-EN
Audio
Indication for iPod Mode
The sound is not output from the speakers.
•
Unit has no output signal of the internal amplifier.
- POWER IC is switched to “ON” (page 16).
•
The iPod is not connected.
- Make sure the iPod is correctly connected (refer to
“Connections”).
Make sure the cable is not bent excessively.
iPod
iPod does not play and no sound is output.
The iPod has not been recognized.
•
- Reset this unit and the iPod. Refer to “Initial System Start-Up”
(page 6). To reset the iPod, refer to the Owner’s Manual of the
iPod.
•
•
There are no songs in the iPod.
- Download songs to the iPod and connect to this unit.
Indication for CD Player
•
Protective circuit is activated due to high temperature.
- The indication will disappear when the temperature returns to
normal operating range.
There is no podcast data in the iPod.
- Download podcast data to the iPod and connect to this unit.
•
•
Communication error
•
•
No CD is inserted.
- Insert a CD.
Although a disc is inserted, “NO DISC” is displayed and the unit
does not start to play or eject the disc.
- Remove the disc by following these steps:
- Turn the ignition key off, and then set to ON again.
- Check the display by reconnecting between the iPod and this
unit, using the iPod cable.
Press the
button again for at least 2 seconds.
If the disc still does not eject, consult your Alpine dealer.
Caused by the iPod Software Version not being compatible with
this unit.
- Update the iPod Software Version to be compatible with this
unit.
•
•
Mechanism error.
1) Press the button and eject the CD.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting, press the
button again.
If the error indication still does not turn off after pressing the
button for a few times, consult your Alpine dealer.
When “ERROR” is displayed:
If the disc cannot be ejected by pressing , press the RESET switch
(refer to page 6) and press
again.
If the disc still cannot be ejected, consult your Alpine dealer.
•
•
A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate that is supported by the unit.
21-EN
Specifications
FM TUNER SECTION
Tuning Range
87.7-107.9 MHz
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
9.3 dBf (0.8 µV/75 ohms)
13.5 dBf (1.3 µV/75 ohms)
80 dB
65 dB
35 dB
2.0 dB
Capture Ratio
AM TUNER SECTION
Tuning Range
530-1,710 kHz
22.5 µV/27 dB
Sensitivity (IEC Standard)
CD PLAYER SECTION
Frequency Response
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
5-20,000 Hz ( 1 dB)
Below measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
105 dB
Signal-to-Noise Ratio
Channel Separation
85 dB (at 1 kHz)
PICKUP
Wave length
Laser power
795 nm
CLASS I
GENERAL
Power Requirement
14.4 V DC
(11-16 V allowable)
16 W RMS × 4*
Power Output
* Primary amplifier ratings per CEA-2006 Standard
•
•
Power output: measured at 4 Ohms and 1% THD+N
S/N: 80 dBA (reference: 1 W into 4 Ohms)
Maximum Pre-Output Voltage
2 V/10 k ohms
Bass
14 dB at 100 Hz
14 dB at 10 kHz
1.6 kg (3 lbs. 8 oz)
Treble
Weight
CHASSIS SIZE
Width
Height
Depth
178 mm (7")
50 mm (2")
161 mm (6-3/8")
NOSEPIECE SIZE
Width
Height
Depth
170 mm (6-3/4")
46 mm (1-13/16")
24 mm (15/16")
•
Due to continuous product improvement, specifications and design
are subject to change without notice.
22-EN
Installation and Connections
Before installing or connecting the unit, please read the
following and pages 3 and 5 of this manual thoroughly
for proper use.
Caution
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
Warning
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire or product
damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
Be sure to use only the specified accessory parts. Use of other than
designated parts may damage this unit internally or may not
securely install the unit in place. This may cause parts to become
loose resulting in hazards or product failure.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Failure to do so may result in electric shock or injury due to
Route the cables and wiring away from moving parts (like the seat
rails) or sharp or pointed edges. This will prevent crimping and
damage to the wiring. If wiring passes through a hole in metal, use
a rubber grommet to prevent the wire’s insulation from being cut by
the metal edge of the hole.
electrical shorts.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN
SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to
prevent obstructions when driving. Cables or wiring that obstruct or
hang up on places such as the steering wheel, gear lever, brake
pedals, etc. can be extremely hazardous.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR
DUST.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit may
result in product failure.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
Precautions
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.
•
•
•
Be sure to disconnect the cable from the (–) battery post before
installing your CDE-9881. This will reduce any chance of
damage to the unit in case of a short-circuit.
When drilling holes in the chassis for installation, take precautions
so as not to contact, damage or obstruct pipes, fuel lines, tanks or
electrical wiring. Failure to take such precautions may result in fire.
Be sure to connect the colour coded leads according to the
diagram. Incorrect connections may cause the unit to
malfunction or damage to the vehicle’s electrical system.
When making connections to the vehicle’s electrical system, be
aware of the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power for this
unit. When connecting the CDE-9881 to the fuse box, make sure
the fuse for the intended circuit of the CDE-9881 has the
appropriate amperage. Failure to do so may result in damage to
the unit and/or the vehicle. When in doubt, consult your Alpine
dealer.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING
SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could disable
control of the vehicle and cause fire etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
•
•
The CDE-9881 uses female RCA-type jacks for connection to
other units (e.g. amplifier) having RCA connectors. You may
need an adaptor to connect other units. If so, please contact your
authorized Alpine dealer for assistance.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER
VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR
GEARSHIFT.
Be sure to connect the speaker (–) leads to the speaker (–)
terminal. Never connect left and right channel speaker cables to
each other or to the vehicle body.
Doing so may obstruct forward vision or hamper movement etc.
and results in serious accident.
IMPORTANT
SERIAL NUMBER:
Please record the serial number of your unit in the space provided
below and keep it as a permanent record. The serial number or the
engraved serial number is located on the bottom of the unit.
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
23-EN
Installation
Screw
2
Hex Nut (M5)
2
*
Bolt Stud
Detachable Front
Panel
Metal
Mounting
Strap
1
*
Caution
When you install this unit in your car, do not remove the
detachable front panel.
This unit
If the detachable front panel is removed during installation, you
might press too hard and warp the metal plate that holds it in
place.
Ground Lead
Chassis
Reinforce the head unit with the metal mounting
strap (not supplied). Secure the ground lead of the
•
The main unit must be mounted within 35 degrees of the horizontal
plane, back to front.
1
unit to a clean metal spot using a screw (* ) already
attached to the vehicle’s chassis.
2
•
For the screw marked “* ”, use an appropriate screw for the chosen
Less than 35°
mounting location.
Connect each input lead coming from an amplifier to
the corresponding output lead coming from the left
rear of the CDE-9881. Connect all other leads of the
CDE-9881 according to details described in the
CONNECTlONS section.
Mounting Sleeve
(Included)
1
Dashboard
Pressure Plates*
This unit
* If the installed mounting sleeve is loose in the dashboard, the
pressure plates may be bent slightly to remedy the problem.
Remove the Detachable Front Panel (refer to page 6).
Remove the mounting sleeve from the main unit
(see “Removal” on page 25).
24-EN
Slide the CDE-9881 into the dashboard until it clicks.
This ensures that the unit is properly locked and will
not accidentally come out from the dashboard.
Install the detachable front panel.
3
Removal
1. Remove the detachable front panel.
2. Insert the bracket keys into the unit, along the guides
on either side. The unit can now be removed from the
mounting sleeve.
This unit
Bracket Keys
(Included)
3. Pull the unit out, keeping it unlocked as you do so.
<JAPANESE CAR>
Front Frame
Screws (M5 × 8)
(Included)
This unit
Ground Lead
3
*
Mounting Bracket
Secure the ground lead of the unit to a clean metal spot using a screw
3
(* ) already attached to the vehicle’s chassis.
25-EN
Connections
To iPod
Antenna
Blue
POWER ANT
To power antenna
To amplifier
Blue/White REMOTE TURN-ON
Pink/Black AUDIO INTERRUPT IN
To vehicle phone
Orange
ILLUMINATION
To the instrument cluster illumination
lead
Red
IGNITION
BATTERY
Ignition Key
Yellow
Black
GND
Battery
Gray
Speakers
SPEAKER
RIGHT FRONT
Front Right
Gray/Black
Violet/Black
SPEAKER
RIGHT REAR
Rear Right
Rear Left
Front Left
Violet
Green
SPEAKER
LEFT REAR
Green/Black
White/Black
SPEAKER
LEFT FRONT
White
Speakers
Rear Left
Amplifier
Rear Right
Front Left
Amplifier
Amplifier
Front Right
Subwoofers
26-EN
Antenna Receptacle
Left Rear (+) Speaker Output Lead (Green)
Left Rear (–) Speaker Output Lead (Green/Black)
Left Front (–) Speaker Output Lead (White/Black)
Left Front (+) Speaker Output Lead (White)
Fuse Holder (10A)
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna,
if applicable.
•
This lead should be used only for controlling the vehicle’s power
antenna. Do not use this lead to turn on an amplifier or a signal
processor, etc.
Rear Output RCA Connectors
RED is right and WHITE is left.
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
Front Output RCA Connectors
RED is right and WHITE is left.
Subwoofer RCA Connectors
RED is right and WHITE is left.
Audio Interrupt In Lead (Pink/Black)
Connect this lead to the Audio interface output of a cellular
phone which provides ground shorting when a call is
received.
RCA Extension Cable (sold separately)
iPod Direct Connector
Control iPod signals.
Connect this to an iPod by using the FULL SPEED
Connection Cable (KCE-422i) (sold separately).
FULL SPEEDTM Connection Cable (KCE-422i) (sold
separately)
Illumination Lead (Orange)
TM
This lead may be connected to the vehicle’s instrument
cluster illumination lead. This will allow the backlighting of
the CDE-9881 to dim whenever the vehicle’s lights are
turned on.
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle’s fuse
box or another unused power source which provides (+)12V
only when the ignition is turned on or in the accessory
position.
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle’s
battery.
Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
Power Supply Connector
Right Front (+) Speaker Output Lead (Gray)
Right Front (–) Speaker Output Lead (Gray/Black)
Right Rear (–) Speaker Output Lead (Violet/Black)
Right Rear (+) Speaker Output Lead (Violet)
To prevent external noise from entering the audio system.
•
•
•
•
Locate the unit and route the leads at least 10 cm away from the car harness.
Keep the battery power leads as far away from other leads as possible.
Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise
suppressors, contact them for further information.
•
Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
27-EN
LIMITED WARRANTY
ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. (“Alpine”), are dedicated to quality craftsmanship and
are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer
or contact Alpine at one of the telephone numbers listed below.
C You must supply proof of your purchase of the product.
PRODUCTS COVERED:
D You must package the product securely to avoid damage
during shipment. To prevent lost packages it is
recommended to use a carrier that provides a tracking
service.
This Warranty covers Car Audio Products and Related
Accessories (“the product”). Products purchased in the Canada
are covered only in the Canada. Products purchased in the
U.S.A. are covered only in the U.S.A.
HOW WE LIMIT IMPLIED WARRANTIES:
LENGTH OF WARRANTY:
ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR USE
AND MERCHANTABILITY ARE LIMITED IN DURATION TO
THE PERIOD OF THE EXPRESS WARRANTY SET FORTH
ABOVE AND NO PERSON IS AUTHORIZED TO ASSUME FOR
ALPINE ANY OTHER LIABILITY IN CONNECTION WITH THE
SALE OF THE PRODUCT.
This Warranty is in effect for one year from the date of the first
consumer purchase.
WHO IS COVERED:
This Warranty only covers the original purchaser of the product,
who must reside in the United States, Puerto Rico or Canada.
WHAT IS COVERED:
This Warranty covers defects in materials or workmanship (parts
and labor) in the product.
HOW WE EXCLUDE CERTAIN DAMAGES:
ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR
INCIDENTAL AND CONSEQUENTIAL DAMAGES CAUSED BY
THE PRODUCT. THE TERM “INCIDENTAL DAMAGES”
REFERS TO EXPENSES OF TRANSPORTING THE
PRODUCT TO THE ALPINE SERVICE CENTER, LOSS OF
THE ORIGINAL PURCHASER’S TIME, LOSS OF THE USE OF
THE PRODUCT, BUS FARES, CAR RENTALS OR OTHERS
COSTS RELATING TO THE CARE AND CUSTODY OF THE
PRODUCT. THE TERM “CONSEQUENTIAL DAMAGES”
REFERS TO THE COST OF REPAIRING OR REPLACING
OTHER PROPERTY WHICH IS DAMAGED WHEN THIS
PRODUCT DOES NOT WORK PROPERLY. THE REMEDIES
PROVIDED UNDER THIS WARRANTY ARE EXCLUSIVE AND
IN LIEU OF ALL OTHERS.
WHAT IS NOT COVERED:
This Warranty does not cover the following:
A Damage occurring during shipment of the product to Alpine
for repair (claims must be presented to the carrier).
B Damage caused by accident or abuse, including burned
voice coils caused by over-driving the speaker (amplifier level
is turned up and driven into distortion or clipping). Speaker
mechanical failure (e.g. punctures, tears or rips). Cracked or
damaged LCD panels. Dropped or damaged hard drives.
C Damage caused by negligence, misuse, improper operation
or failure to follow instructions contained in the Owner’s
manual.
D Damage caused by act of God, including without limitation,
earthquake, fire, flood, storms or other acts of nature.
Any cost or expense related to the removal or reinstallation of
the product.
E Service performed by an unauthorized person, company or
association.
F Any product which has the serial number defaced, altered or
removed.
G Any product which has been adjusted, altered or modified
without Alpine’s consent.
HOW STATE/PROVINCIAL LAW RELATES TO THE
WARRANTY:
This Warranty gives you specific legal rights, and you may also
have other rights which vary from state to state and province to
province. In addition, some states/provinces do not allow
limitations on how long an implied warranty lasts, and some do
not allow the exclusion or limitation of incidental or
consequential damages. Accordingly, limitations as to these
matters contained herein may not apply to you.
IN CANADA ONLY:
H Any product not distributed by Alpine within the United
States, Puerto Rico or Canada.
I Any product not purchased from an Authorized Alpine
Dealer.
This Warranty is not valid unless your Alpine car audio product
has been installed in your vehicle by an Authorized Installation
Center, and this warranty stamped upon installation by the
installation center.
HOW TO OBTAIN WARRANTY SERVICE:
A You are responsible for delivery of the product to an
Authorized Alpine Service Center or Alpine for repair and for
payment of any initial shipping charges. Alpine will, at its
option, repair or replace the product with a new or
reconditioned product without charge. If the repairs are
covered by the warranty, and if the product was shipped to an
Authorized Alpine Service Center or Alpine, Alpine will pay
the return shipping charges.
HOW TO CONTACT CUSTOMER SERVICE:
Should the product require service, please call the following
number for your nearest Authorized Alpine Service Center.
CAR AUDIO
1-800-ALPINE-1 (1-800-257-4631)
1-888-NAV-HELP (1-888-628-4357)
NAVIGATION
B You should provide a detailed description of the problem(s)
for which service is required.
ALPINE ELECTRONICS OF AMERICA, INC., 19145 Gramercy Place, Torrance, California 90501, U.S.A.
ALPINE ELECTRONICS OF CANADA, INC., 777 Supertest Road, Toronto, Ontario M3J 2M9, Canada
Do not send products to these addresses.
Call the toll free telephone number or visit the website to locate a service center.
|