Attaching
Never Attempt the Following
Installation Location
Make sure this unit will not be installed in a location subjected to:
On handling Compact Discs (CD/CD-R/CD-RW)
Presetting Stations Automatically
R
Getting Started
Radio
1
2
Insert the left side of the front panel into the main
Do not grip or pull out the disc while it is being pulled back into the
player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power is
off.
•
•
•
•
•
•
Do not touch the surface.
Do not expose the disc to direct sunlight.
Do not affix stickers or labels.
Clean the disc when it is dusty.
Make sure that there are no bumps around the disc.
Do not use commercially available disc accessories.
CAUTION
Operating Instructions
unit. Align the groove on the front panel with the
projections on the main unit.
Alpine accepts no responsibility for lost data, etc., even if data, etc.
is lost while using this product.
•
•
•
•
Direct sun and heat
High humidity and water
Excessive dust
1
2
Press BAND/
band is displayed.
/
repeatedly until the desired radio
MP3/*WMA/CD Receiver
SOURCE/
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN
Push the right side of the front panel until it locks
firmly into the main unit.
*CDE-110UB does not support WMA
EN
BAND/
A.ME
/
On Handling USB Memory
SOURCE/
Rotary encoder
WARNING
INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
Excessive vibrations
Press and holdA.ME for at least 2 seconds.
The frequency on the display continues to change while the
automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the
selected band. They will be stored into preset buttons 1 to 6
in order of signal strength.
•
•
•
To prevent malfunction or damage, note the following points.
Read the USB memory Owner’s Manual thoroughly.
Do not touch the terminals by hand or metal.
Do not subject USB memory to excessive shock.
Do not bend, drop, disassemble, modify or soak in the water.
Avoid usage or storage in the following locations:
Anywhere in the car exposed to direct sunlight or high
temperatures.
Anywhere the possibility of high humidity or corrosive
substances are present.
Fix the USB memory in a location where driver operation will
not be hindered.
USB memory may not function correctly at high or low temperature
The USB flash memory supports a maximum of 4 GB per partition.
The unit recognizes only one partition.
Use only certified USB memory. Note that even certified USB
memory, may not function correctly depending on its type or state.
USB memory function is not guaranteed. Use USB memory
according to the terms of agreement.
Depending on the settings of the USB memory type, memory
state or encoding software, the unit may not play back or display
properly.
Do not leave the disc in the caror the unit for a long time. Never
expose the disc to direct sunlight. Heat and humidity may damage
the CD and you may not be able to play it again.
Correct Handling
CDE-110/CDE-110C
CDE-110E/CDE-110UB
Do not drop the disc while handling. Hold the disc so you will not
leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.
WARNING
CAUTION
To customers using CD-R/CD-RW
This symbol means important instructions.
Failure to heed them can result in serious injury
or death.
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
•
If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.
CORRECT
•
If a CD-R/CD-RW cannot be played back, make sure the last
recording session was closed (finalized).
Finalize the CD-R/CD-RW if necessary, and attempt playback
again.
VIEW
Preset buttons
(1 through 6)
•
•
Before attaching the front panel, make sure that there is no dirt or
dust on the connector terminals and no foreign object between the
front panel and the main unit.
Attach the front panel carefully, holding the sides of the front panel to
avoid pushing buttons by mistake.
•
Inserting Discs
Your player accepts only one disc at a time for playback. Do not
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc.
Playing a disc while driving on a very bumpy road may result in
skips, but this will not scratch the disc or damage the player.
Tuning to Preset Stations
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle
in a safe location before performing these functions. Failure to do
so may result in an accident.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
•
•
About media that can be played
Use only compact discs with the label side showing the CD logo
marks below.
Accessory List
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Centre for repairing.
Listening to Radio
1
2
Press BAND/
is displayed.
/
repeatedly until the desired band
INCORRECT
CORRECT
•
•
•
•
•
•
•
•
•
•
•
Head unit ...................................................................1
Power cable...............................................................1
Mounting sleeve.........................................................1
Carrying case.............................................................1
Bracket key................................................................2
Rubber Cap ...............................................................1
Bolt Stud ...................................................................1
Owner’s Manual ........................................................1 set
1
2
Press SOURCE/ to select RADIO mode.
Adjusting Volume
Press any one of the station preset buttons
(1 through 6) that has your desired radio station in
memory.
• OWNER’S MANUAL
New Discs
PRECAUTIONS
PressBAND/
band is displayed.
/
repeatedly until the desired radio
AM FM1
Turn the Rotary encoder until the desired sound is
obtained.
Adjusting Volume : 0 ~ 40
Please read before using this equipment.
To prevent the CD from jamming, the LCD is displayed as error if
discs with irregular surfaces are inserted or if discs are inserted
incorrectly. When a new disc is ejected immediately after initial
loading, use your finger to feel around the inside of the centre hole
and outside edge of the disc. If you feel any small bumps or
irregularities, this could inhibit proper loading of the disc. To
remove the bumps, rub the inside edge of the hole and outside edge
of the disc with a ballpoint pen or other such instrument, then insert
the disc again.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISES WHILE DRIVING.
The display shows the band, preset number and frequency
of the station selected.
FM1
FM2
FM3
or
Product Cleaning
Disc Cleaning
•
•
A file that is copy-protected (copyright protection) cannot be
played back.
Excessive volume levels that obscure sounds such as emergency
vehicle sirens or road warning signals (train crossings, etc.) can be
dangerous and may result in an accident. LISTENING AT LOUD
VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING
DAMAGE.
If you use unspecified compact discs, correct performance cannot
be guaranteed.
You can play CD-Rs (CD-Recordables)/CD-RWs (CD-
ReWritables) which have been recorded only on audio devices.
You can also play CD-Rs/CD-RWs containing MP3/WMA
formatted audio files.
Use a soft dry cloth for periodic cleaning of the product. For more
severe stains, please dampen the cloth with water only. Anything
else has the chance of dissolving the paint or damaging the plastic.
Fingerprints, dust, or soil on the surface of the disc could cause the
CD player to skip. For routine cleaning, wipe the playing surface
with a clean, soft cloth from the centre of the disc to the outer edge.
If the surface is heavily soiled,dampen a clean, soft cloth in a
solution of mild neutral detergent before cleaning the disc.
3
Press
to tune in the desired station.
for at least 0.5 seconds to seek
Press and hold
station.
or
Setting Time
USB memory may take time to start playback. If there is a
particular file other than audio in the USB memory, it may take
considerable time before the file is played back or searched.
The unit can play back “mp3”, “wma” or “m4a” file extensions.
Do not add the above extensions to a file other than audio data.
This non-audio data will not be recognised. The resulting playback
may contain noise that can damage speakers and/or amplifiers.
It is recommended to back up important data on a personal computer.
Do not remove the USB device while playback is in progress.
Change SOURCE to something other than USB, then remove the
USB device to prevent possible damage to its memory.
Turning Power On and Off
1
2
3
4
Press and hold VIEWfor at least 2 seconds.
The hour indication will blink.
•
•
Temperature
Press SOURCE/ to turn on the unit.
Presetting Stations Manually
Be sure the temperature inside the vehicle is between +55°C
(+131°F) and –10°C (+14°F) before turning your unit on.
•
The first time power is turned on, the volume will start from level 18.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Centre Hole
Centre Hole
•
Some of the following CDs may not play on this unit:
Press
or
to adjust the hours while the
New Disc
Press and hold SOURCE/ for at least 2 seconds to
turn off the unit.
Viewing the display may distract the driver from looking ahead of
the vehicle and cause an accident.
Flawed CDs, CDs with fingerprints, CDs exposed to extreme
temperatures or sunlight (e.g., left in the car or this unit), CDs
recorded under unstable conditions, CDs on which a recording
failed or a re-recording was attempted, copy-protected CDs
which do not conform to the audio CD industry standard.
Use discs with MP3/WMA files written in a format
1
2
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
•
•
time indication is blinking.
Moisture Condensation
When the hour has been adjusted, press VIEW.
The Minute indication will blink.
You may notice the CD playback sound wavering due to
condensation. If this happens, remove the disc from the player and
wait about an hour for the moisture to evaporate.
Outside
(Bumps)
Bumps
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6) into which you wish
to store the station.
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
ALPINE ELECTRONICS OF ASIA PACIFIC CO.,LTD.
555 Rasa Tower 1, Unit 2601-2602, 26th Floor,
Phaholyothin Road, Chatuchak, Chatuchak, Bangkok 10900, Thailand
Phone 02-937-0505
Detaching and Attaching the Front Panel
Disc Accessories
•
Windows Media and the Windows logo are trademarks, or
registered trademarks of Microsoft Corporation in the United
States and/or other countries.
Press
or
to adjust the minutes while the
•
•
There are various accessories available on the market for protecting
the disc surface and improving sound quality. However, most of
them will influence the thickness and/or diameter of the disc. Using
such accessories can cause the disc to be out of standard
specifications and may create operational problems. We
recommend not using these accessories on discs played in Alpine
CD players.
time indication is blinking.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
compatible with this unit. For details, see “About MP3/WMA”.
Irregular Shaped Discs
Be sure to use round shape discs only for this unit and never use
any special shape discs.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
Damaged Disc
Do not attempt to play cracked, warped, or damaged discs. Playing
a bad disc could severely damage the playback mechanism.
Phone 03-8787-1200
Phone 02-484781
Detaching
•
•
“MPEG Layer-3 audio coding technology licensed from
ROM data other than audio files contained in a disc will not
produce sound when played back.
5
When the minute has been adjusted, press VIEW.
The setting time mode is completed.
Fraunhofer IIS and Thomson.”
1
2
Turn off the unit power.
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
ALPINE ELECTRONICS GmbH
Wilhelm-Wagenfeld-Str. 1-3, 80807 München, Germany
Phone 089-32 42 640
“Supply of this product only conveys a license for private,
non-commercial use and does not convey a license nor imply
any right to use this product in any commercial (i.e. revenue-
generation) real time broadcasting (terrestrial, satellite, cable
and/or any other media), broadcasting/streaming via internet,
intranets and/or other networks or in other electronic content
distribution systems, such as pay-audio or audio-on-demand
applications. An independent license for such use is required.
Use of special shape discs may cause damage to the mechanism.
•
•
A total of 24 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2, FM3 and AM).
If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
Protecting the USB connection terminal
Press
(Release) at the upper right side until the
•
Hold down
or
to change numbers rapidly.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
Maintenance
Shinagawa-ku,
•
Only a USB memory can be connected to the USB connection
terminal on this unit. Correct performance using other USB
products cannot be guaranteed. A USB hub is not supported.
Do not connect a USB memory over 20 mm wide. Also, avoid
connecting USB memory and Front Aux at the same time.
If a USB device is inserted in the unit, it projects out and may be
a danger while driving. Use a commercially available USB
standard extension cable, and connect it in a safe way.
Depending on the connected USB memory device, the unit may
not function or some functions may not be performed.
The audio file format that can be played back on the unit is
MP3/WMA.
front panel pops out.
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service
Station for servicing.
Tokyo 141-0031, Japan
Phone 03-5496-8231
3
Grasp the right side of the front panel and pull it out.
Controllable with Remote Control
This unit can be controlled with an optional Alpine
remote control. For details, consult your Alpine dealer.
•
•
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
ALPINE ELECTRONICS (BENELUX) GmbH
Leuvensesteenweg 510-B6,
1930 Zaventem, Belgium
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Point the optional remote control transmitter at the
remote-control sensor.
USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.
Failure to do so may result in fire or electric shock.
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
Transparent Sheet
Disc Stabilizer
Phone 02-725-13 15
Phone 1-800-ALPINE-1 (1-800-257-4631)
•
•
•
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto,
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
•
The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel). This is not a
malfunction.
To protect the front panel, place it in the supplied carrying case.
When detaching the front panel, do not apply excessive force as it
may result in malfunction.
Ontario M3J 2M9, Canada
Artist/song name, etc., can be displayed, however characters
may not be correctly displayed.
•
•
Phone 1-800-ALPINE-1 (1-800-257-4631)
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire,
electric shock or other injury.
Phone 01-48638989
Remote control sensor
1
2
3
4
5
3
Press
or
to select the desired track (file).
Supported playback sampling rates and bit rates
Order of files
Displaying Time
Equalizer Presets (Factory’s EQ)
M.I.X. (Random Play)
About MP3/WMA
Returning to the beginning of the current track (file):
Other Functions
Files are played back in the order that the writing software writes
them to the disc. Therefore, the playback order may not be what
is expected. Verify the writing order in the software’s
documentation. The playback order of the folders and files is as
follows.
Sound Setting
CD/MP3/WMA
MP3
Press
.
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,
16 kHz, 12 kHz, 11.025 kHz, 8 kHz
Press VIEWrepeatedly until the time is displayed.
Each press changes the display.
For details, see “Displaying the Text”.
6 typical equalizer settings are preset at the factory for a variety of
musical source material.
Press 4(M.I.X.) in the play mode.
Fast backward:
The “
M.I.X.” indicator lights up, and the tracks (files) on the
CAUTION
SOURCE/
Press and hold
.
Bit rates
8 - 320 kbps
disc will be played back in random sequence.
SOURCE/
Rotary encoder (AUDIO)
Except for private use, duplicating audio data (including
MP3/WMA data) or distributing, transferring, or copying it,
whether for free or for a fee, without permission of the copyright
holder is strictly prohibited by the Copyright Act and by
international treaty.
Press SOUND repeatedly until the desired Factory’s EQ
type is displayed.
With each press of the button, the equalizer mode will display
BAND/
/
Advancing to the beginning of the next track (file):
•
Selecting any radio or CD function while in the clock priority mode
will interrupt the time display momentarily. The function selected
will be displayed for about 5 seconds before the time returns to the
display.
WMA
Press 4(M.I.X.) again to cancel.
Press
.
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz
Fast forward:
Bit rates: 64 - 160 kbps
the selected equalizer characteristic.
Root folder
Press and hold
.
Folder M.I.X. (Random Play) (MP3/
WMA)
FLAT(OFF)
FLAT(OFF)
ROCK
POP
JAZZ
VOCAL
CLUB
This device may not play back correctly depending on sampling
rates.
4
To pause playback, press BAND/
Pressing BAND/ again will resume playback.
/
.
What is MP3?
/
Using the Front AUX Input Terminal
MP3, whose official name is “MPEG-1 Audio Layer 3,” is a
compression standard prescribed by the ISO, the International
Standardization Organization and MPEG which is a joint activity
institution of the IEC.
Press and hold 4(M.I.X.) for at least 2 seconds.
ID3 tags/WMA tags
VIEW
3(SCROLL)
5
To eject the disc, press
.
SOUND
Connect a portable music player, etc. by simply connecting it to the
input on the front panel. An optional adapter cable is required (standard
RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).
The “
FOLDER” and “
M.I.X.” indicators appear in the
6(RPT)
4(M.I.X.)
5(SCAN)
This device supports ID3 tag and WMA tag.
If tag data is in an MP3/WMA file, this device can display
the title (track title), artist name, and album name ID3 tag/WMA
tag data.
display, and all files in the current folder are played back in
random sequence.
•
Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
The “
Three-inch (8 cm) CDs cannot be used.
The CD-player can play discs containing audio data, MP3 data,
and WMA data.
WMA format files that are protected by DRM (Digital Rights
Management).
The track display for MP3/WMA data playback is the file
numbers recorded on the disc.
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
Note
MP3 files contain compressed audio data. MP3 encoding is
capable of compressing audio data at extremely high ratios,
reducing the size of music files to as much as one-tenth their
original size. This is achieved while still maintaining near CD
quality. The MP3 format realises such high compression ratios
by eliminating the sounds that are either inaudible to the human
ear or masked by other sounds.
•
•
•
DISC IN” indicator lights up when a disc is inserted.
Adjusting Bass Level/Treble Level/
Balance (Between Left and Right)/Fader
(Between Front and Rear)
*
CDE-110UB does not support WMA.
Press and hold 4(M.I.X.) again to cancel.
Note
Press SOURCE/ , and select the AUX mode to listen to
the portable device.
*
CDE-110UB does not support WMA.
This device can only display up to 64 characters. (Unicoded file
and folder names are up to 32 characters.)
For non-supported characters and symbols an asterisk is
displayed.
If information contains characters other than ID3 tag information,
the audio file may not be played back.
Displaying the Text
Scanning Programs
•
•
•
1
2
RADIO
CD
*
USB
*
AUX
RADIO
Playback
Text information, such as the disc name and the track name, will be
displayed if playing a CD text compatible disc. It is also possible to
display the folder name, the file name and the tag, etc., while playing
MP3/WMA files.
Press 5(SCAN)to activate the scan mode.
The first 10 seconds of each track (file) will be played back in
succession.
1 Displayed only when a disc has been inserted.
1
Press Rotary encoder (AUDIO) repeatedly to
choose the desired mode.
*
*
2 Displayed only when USB memory is connected.
What is WMA?
The tag information may not be correctly displayed, depending
on the contents.
1
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically, and the
WMA, or “Windows Media™ Audio,” is compressed audio data.
WMA is similar to MP3 audio data and can achieve CD quality
sound with small file sizes.
Each press changes the mode as follows:
Producing MP3/WMA discs
Portable player, etc.
Main unit
Press 5(SCAN) again to cancel.
“
DISC IN” indicator lights up .
BASS
mode
TREBLE
BALANCE
FADER
Return to normal
Press VIEW.
The display will change every time the button is pressed.
MP3/WMA files are prepared, then written to a CD-R or
CD-RW using CD-R writing software. A disc can hold up to 255
files/folders (including Root Folders), and the maximum number
of folders is 255.
Playback may not be performed if a disc exceeds the limitations
described above.
MP3/WMA Play Display
The folder number and file number will be displayed as
described below.
Folder
MP3/WMA File
Bass: -12 ~ +12dB
Treble: -12 ~ +12dB
Balance : L15 ~ R15
Fader : R15 ~ F15
Folder Scanning Programs (MP3/WMA)
Method for creating MP3/WMA files
*
The folder No./ folder Name will not be displayed if no file is
contained in the folder.
•
To scroll text, press 3(SCROLL).
Audio data is compressed using software with MP3/WMA
codecs. For details on creating MP3/WMA files, refer to the
user’s manual for that software.
MP3/WMA files that are playable on this device have the
file extensions “mp3” / “wma” Files with no extension
cannot be played back (WMA ver. 7-9 are supported). Protected
files are not supported.
The display in Radio mode:
Press and hold 5(SCAN) for at least 2 seconds.
From the next folder, the first 10 seconds of the first file in each
folder is played back in sequence.
FREQUENCY
CLOCK
FREQUENCY
Terminology
•
If no operation is performed for 5 seconds after selecting the BASS,
TREBLE, BALANCE or FADER mode, the unit automatically returns
to normal mode.
003–002
Media supported
The display in CD mode:
Bit rate
This is the “sound” compression rate specified for encoding. The
higher the bit rate, the higher the sound quality, but also the larger
the files.
The media that this device can play back are CD-ROMs, CD-Rs,
and CD-RWs.
When a disc is already inserted, press SOURCE/ to
switch to the DISC mode.
Press and hold 5(SCAN) again to cancel.
1
TRACK NO./ELAPSED TIME
TEXT (DISC NAME)
TRACK NO./ELAPSED TIME
*
TEXT
1
or
(TRACK NAME)
*
CLOCK
Folder number File number
display
2
Turn the Rotary encoder until the desired sound is
obtained in each mode.
The mode will change every time the button is pressed.
Corresponding File Systems
The display in MP3/WMA mode:
display
1
2
RADIO
CD
*
USB
*
AUX
RADIO
This device supports discs formatted with ISO9660 Level 1 or
Level 2.
Sampling rate
FOLDER NO./FILE NO.
FILE NAME
NAME *
ELAPSED TIME
FOLDER NAME
*
Optional adapter cable (RCA pin
plugs [red, white] 3.5ø miniplugs)
or (3.5ø miniplugs)
2
2
•
Press VIEW to switch the display. See “Displaying the Text” for
1 Displayed only when a disc has been inserted.
2 Displayed only when USB memory is connected.
ALBUM NAME
CLOCK FOLDER NO./FILE NO.
*
SONG NAME
/ARTIST
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of 44.1 kHz,
so the sound is sampled (recorded) 44,100 times per second. The
higher the sampling rate, the higher the sound quality, but also the
larger the volume of data.
*
*
2
information about display switching.
Under the ISO9660 standard, there are some restrictions to
remember.
The display in AUX mode:
AUX IN CLOCK
The maximum nested folder depth is 8 (including the root
directory). The number of characters for a folder/file name is
limited.
2
While playing back MP3/WMA, press
to select the desired folder.
or
Repeat Play
AUX IN
1
2
*
*
Displayed during playback of a disc with CD text.
ID3 tag/WMA tag
Valid characters for folder/file names are letters A-Z, a-z,
numbers 0-9 and symbols.
Encoding
Press 6(RPT) to repeatedly play back the current track.
The “
played repeatedly.
Converting music CDs, WAVE (AIFF) files, and other sound files into
the specified audio compression format.
RPT” indicator lights up, and the track (file) will be
If an MP3/WMA file contains ID3 tag/WMA tag information,
the ID3 tag/WMA tag information is displayed (e.g., song name,
artist name, and album name). All other tag data is ignored.
This device also can play back discs in Joliet, Romeo, etc., and
other standards that conform to ISO9660. However, sometimes
the file names, folder names, etc., are not displayed correctly.
Press 6(RPT) again to cancel.
Tag
Song information such as track titles, artist names, album names,
etc., written into MP3/WMA files.
About “Text”
Formats supported
Text:
Folder Repeat Play (MP3/WMA)
Text compatible CDs contain text information such as the disc
This device supports Multi-Session.
This device cannot correctly play back discs recorded with
Track At Once or packet writing.
Root folder
name and track name. Such text information is referred to as
“text.”
The root folder (or root directory) is found at the top of the file
system. The root folder contains all folders and files. It is created
automatically for all burned discs.
Press and hold 6(RPT) for at least 2 seconds.
The “
display, and only files in the current folder are repeatedly played
back.
FOLDER” and “
RPT” indicators appear in the
•
•
•
Some characters may not be displayed correctly with this device,
depending on the character type.
“NO TEXT” is displayed if text information cannot be displayed on
this unit.
The text or tag information may not be correctly displayed,
depending on the contents.
Apple HFS, UDF 1.50, Mixed Mode CD and Enhanced CD (CD-
Extra) are not supported.
Press and hold 6(RPT) again to cancel.
6
7
8
9
10
|